Chemical Engineering BEng (Hons) degree
4 years full-time with placement year or 3 years full-time
- Typical offer
- AAB Entry requirements
- Fees (per academic year)
-
UK: £9,250International: £27,250
- UCAS codes
-
4 years full-time with placement year: H8063 years full-time: H805
- Start date
- October 2023
- Institute code
- L79
- Subject area
- Chemical Engineering
Overview
Chemical Engineering is a highly adaptable and versatile area of engineering, which applies the principles of chemistry, physics, mathematics, biology, and economics to transform energy and materials into useful and affordable products. It covers the research, design and operation of new and existing processes to minimise environmental impacts, ensure compliance with legal and ethical standards and maximise profits and benefits to society.
Research suggests an expected shortfall in skilled chemical engineers to support the UK’s green recovery and net-zero targets, which means chemical engineers will be highly sought after for the specialist work required.
Chemical engineers take leading roles in many different sectors, ranging from energy and water, food, healthcare and pharmaceuticals, to consumer products, and even finance. They use their technical know-how and ingenuity to develop solutions to many of the world’s most pressing challenges, including climate change and the large-scale production of new vaccines.
At Loughborough, we conduct world-leading research to drive the sustainable revolution, in areas such as low-carbon technologies, next-generation healthcare or advanced manufacturing. An example is our new National Centre for the Circular Chemical Economy, which seeks to transform the UK chemical sector to eliminate waste and reliance on fossil technologies. Our research directly informs our teaching and project work, ensuring our students are fully equipped to meet 21st century challenges.
Our Chemical Engineering degrees teach students how to apply scientific and engineering principles to the design and analysis of chemical process equipment and flow sheets. Bench and pilot-scale laboratories, VR simulation, computer classes and project work help students to understand and apply taught principles to engineering problems, whilst also developing key laboratory, teamwork and IT skills.
We offer a number of options during the degree. These include language options in years one and two (at different levels) in either French, German, Spanish or Mandarin, as an alternative to Materials Processing and Food Engineering. Our students can then choose up to three optional modules in their final year including management, environmental, IT, bioprocessing and healthcare topics. During the final design project, students work both in teams and individually to conceptualise and design an industrial plant to address a specified design challenge, usually aligned with their module choices and research strengths of the department. The project brings together all aspects of the degree, including initial technology selection and flowsheet development, detailed design of individual unit operation, process optimisation, safety and operability analysis and finally full economic and environmental evaluation.
What is the difference between MEng and BEng?
The three years of the BEng degree and the first three years of the MEng degree are identical, with a good mix of theory, application and practical content from day one. The additional year of the MEng programme allows students to study a wider range of technical subjects with additional depth, as well as undertaking the Professional Development Project (PDP), which can be undertaken in industry, abroad or at Loughborough. Whilst both the MEng and BEng are accredited by the Institution of Chemical Engineers (IChemE), only the MEng degree fully meets all educational requirements for Chartered Engineer status. Students studying on the BEng course may have opportunity to change to the MEng course if their performance in the first and second year is sufficiently strong.
Why you should choose us
Why you should study this course
Our BEng (Hons) Chemical Engineering degree places great emphasis on developing the professional competences and employability of our students. From the outset, our students will carry out a wide range of supported learning activities, including experimental work, group projects and computer simulations, developing their independent learning, communication skills and confidence.
Our teaching is delivered by a team of passionate academics, complemented by invited engineers to provide real-world examples. Oral and written presentations given by students help develop their confidence in communicating ideas, an essential requirement for a successful career in engineering.
We draw on our strong industrial network to ensure that our course remains relevant to current needs. We also provide multiple opportunities for industrial placements and overseas research projects.
Support available to you
The day you arrive in our department, you will be assigned a member of academic staff to be your personal tutor for the duration of your degree. Initially, personal tutors support students to adapt to higher education and understand the requirements of the degree. Later, they can advise on selecting optional modules, discuss future careers or further study, or provide academic references. Importantly, they can offer additional support, when required, such as signposting or referring you to professional welfare support services or helping to raise and address any issues. In addition, you can book an appointment with our school’s Wellbeing Officer, who runs drop-in sessions throughout the week.
Students also benefit from our award-winning Careers Network team which not only helps in finding placements and graduate jobs, but also offers a wide range of support throughout the application process to maximise the changes of success. This includes both group activities including CV workshops, careers fairs and other high-profile employer events, and more targeted support through one-to-one advice sessions, mock-interview practice sessions or assessment centre preparation. We’ve got everything you need for a successful future.
Professional recognition
Our Chemical Engineering degree is accredited by the Institution of Chemical Engineers (IChemE), the globally recognised industrial body for chemical engineers in the UK. Accreditation means that our programmes are benchmarked against high, internationally recognised standards; this makes it easier to find a job (many companies require this), and puts students on a direct path to Chartership, a formal recognition of their engineering expertise.
What you'll study
Our Chemical Engineering BEng (Hons) degree is designed to provide you with a 'Chemical Engineering Toolbox' that can be applied in all industries that employ chemical engineers. The key principles of chemical engineering are covered within the first two years, to ensure that students choosing to undertake an industrial placement can make a valuable contribution to their placement company, regardless of the sector that they choose.
During their final year, students can choose from a range of optional modules, to focus on particular areas of chemical engineering (e.g. biochemical engineering, healthcare engineering and data analysis) or broaden their understanding of complementary subjects (e.g. business systems, entrepreneurship and innovation, or operations management).
The information below is intended as an example only, featuring module details for the current year of study. Modules are reviewed on an annual basis and may be subject to future changes – revised details will be published through Programme Specifications ahead of each academic year. Please also see Terms and Conditions of Study for more information.
Semester 1 & 2
Compulsory
Chemical Engineering Laboratory
The aims of the module are:
- To make students computer literate and introduce them to the use of the computer as a tool in chemical engineering.
- To introduce students to experimental methods, technical report presentation and writing teamwork skills, oral presentation and EA1 (Engineering Applications 1).
- To reinforce basic chemical engineering concepts and safety through exposure to laboratory experiments.
- To make students aware of available resources and the need to record information and skills."
Process Balances
Impart understanding of the principles of determining steady and unsteady-state process material balances. Make students aware of the importance of process costs and profitability and the need for assessment thereof. Develops skills in carrying out material and heat balances and the use of equilibrium relationships to analyse chemical engineering processes.
Mathematical Methods in Chemical Engineering
The aims of this module are to reinforce and extend students' previous exposure to mathematics with an emphasis on the techniques required to solve problems arising in chemical engineering.
Semester 1
Compulsory
Fluid Mechanics I
To provide students with an introduction to the role and analysis of fluids in chemical engineering. Students are given an appreciation of fluid flow: its regimes, measurement and relevance to problems in the chemical engineering domain, ranging from traditional applications (e.g., pumps) to more recent technologies (e.g., lab-on-a-chip). The students are introduced to the modified Bernoulli approach to energy accountancy, mass continuity, friction, momentum and Newton's analysis of viscosity.
Introduction to Chemical, Biochemical Processes and Sustainability
The aims of this module are:
- To equip students with core chemistry and biochemistry knowledge related to the Chemical Engineering course.
- To introduce students to industrially significant aspects of chemical/biochemical processes and microbiology.
- To make students aware of engineering ethics.
- To introduce the principles of sustainability (environmental, social, economic) to chemical/biochemical processes.
Semester 2
Compulsory
Stagewise Processes
The aims of the module are:
- To introduce the fundamental concepts of separation processes.
- To introduce the ideas of equilibrium, an equilibrium stage and the ways of connecting stages together.
Heat Transfer
The aims of the module are:
- To provide students with a thorough understanding of the fundamental concepts and modes of heat transfer.
- To enable students to solve problems relating to conduction, convection, and radiation modes of heat transfer.
- To enable students to perform calculations relating to sizing of heat exchangers or estimation of process heat duty.
- To introduce the concepts of block diagrams, process flow diagrams, piping and instrumentation diagrams and engineering drawings.
- To equip students with the knowledge and training of how to use a computer aided design (CAD) software.
- To enable students to produce engineering drawings using a CAD software.
Optional
Introduction to Materials Processing
- Some methods of processing a range of material types from raw material to finished part
- How the selection of a processing method can influence the properties of the material
University-Wide Language Programme
Choice of applied languages from the University-Wide Language Programme.
Semester 1 & 2
Compulsory
Process Design and Safety
The aims of this module are:
- To familiarise students with the stages involved in progressing a process design, from early inception to a detailed plant design, with particular emphasis on inherent safety principles.
- To convey the importance of safety in the process industry and impart a working knowledge of different hazard evaluation procedures and consequence modelling tools.
Mass Transfer and Separations
The aims of this module are:
- To introduce the fundamental concepts of mass transfer theory and calculations
- To give students an understanding of the principles required for the design of equilibrium-staged separation processes
- To provide students with an understanding of the underlying principles required for mass transfer design of columns
- To apply these techniques to the process design of packed and tray towers
Semester 1
Compulsory
Thermodynamics II
The aims of this module are to consolidate and extend the knowledge and understanding of thermodynamic equations, and in particular their application to practical systems.
Instrumentation & Control
The aims of this module are:
- To develop an understanding of the principles of process control loops, their constituent components, and how these interact to produce a control response.
- To develop students' personal professional skills and awareness both for procedures related to their imminent training period in industry and for their longer term career.
Fluid Mechanics II
The aims of this module are:
- To develop students' understanding of the flow of fluids and complex fluids, through the application of the principles of conservation of energy, mass and momentum.
- To develop expertise in the solution of fluid mechanics problems encountered in chemical engineering.
- To acquire competences using Computational Fluid Dynamics (CFD) software for solving flow problems in complex geometries.
Semester 2
Compulsory
Reaction Engineering I
The aims of this module are to provide an introduction to chemical reaction engineering with an emphasis on reactor design and simulation. Includes introduction to reactor types, relative yield, reaction kinetics, choice of reactor type and operation.
Plant Engineering
The aims of this module are to develop knowledge and understanding of stress, strain, bending and force balances, their relation to the sizing, design and form of structures/components under load(s), the methods required to calculate stresses in example structures/components and their implementation for safe design, the selection of materials for strength and chemical plant layout.
Particle Technology
The aims of this module are:
- To give students a critical understanding of the methods available for the production, separation, processing and characterisation of systems containing particulates such as powders, emulsions, aerosols and dispersions.
- To introduce and/or reinforce the students knowledge of fluid mechanics relevant to systems containing a dispersed phase.
Process Systems Engineering
The aims of this module are to introduce students to the use of modern computer based techniques for the mass, overall and component, and energy balance aspects of process design using steady state process simulators.
Optional
Food Engineering
The aims of this module are:
- To introduce students to a variety of processes used to preserve food, particularly those involving heating or cooling.
- To introduce the microbial and biochemical aspects of the processes and show how biological materials such as foods must be treated differently to other process materials encountered by chemical engineers.
- To use experimental data and formulae to calculate process times based on general heat and mass transfer theory applied to food systems.
- To introduce various rheological models for the flow of foods, the impact of microstructure on rheological properties, and flow calculations in various geometries.
University-Wide Language Programme
Choice of applied languages from the University-Wide Language Programme.
Semester 1
Compulsory
Transfer Processes
To impart in-depth knowledge and understanding in heat, mass and momentum transfer describing theories and numerical calculations in transport phenomena. The module takes an engineering approach and applies semi-empirical and theoretical results to the solution of chemical and process engineering problems.
Reaction Engineering II
Process Economics and Project Management
The aims of this module are:
- To develop in-depth understanding of the techniques of capital project appraisal and planning used in the process industries.
- To impart and extend knowledge of project management and process optimisation including critical path analysis, linear and non-linear optimisation, and process integration.
- To instruct students on how to overcome uncertainty (in relation to decision making) and its influence upon choice between options.
- To develop generic skills in setting the aims for a project, trials and experiments, formulating a strategy to tackle problems.
Environmental Protection and Pollution Control
Optional
Business Systems
- to develop an appreciation of the use of IT based Management Information Systems and Decision Support Systems in business contexts, particularly in management planning, decision-making and control
- to enhance the ability to communicate effectively in writing and orally.
Entrepreneurship and Innovation
The Circular Economy in Chemical and Biochemical Engineering
- To introduce students to the concept of the circular economy and emerging technologies in the areas of energy, resource recovery, and the energy-water-resource nexus.
- To introduce the whole system approach and the evaluation of sustainability.
- To stimulate students' creativity in the application of emerging technologies to situation case studies.
Data Analysis
The objective of this module is to introduce (mainly statistical) methods for the analysis of data generated from experiments, plant trials or production. Students will gain an understanding of how confidence levels can be used to quantify uncertainty in data and shape the conclusions that can be drawn from them, to then inform decision making and resulting actions.
Biochemical Engineering
The aims of this module are:
- To enable students to analyse biological processes based on an understanding of the principles involved
- To develop strategies for processing biological materials based on available technologies
- To give examples of industrially relevant processes.
Semester 2
Compulsory
Individual Process Design Project
To further develop knowledge and understanding of chemical engineering principles and practice through the detailed design study of an individual piece or small grouping of equipment.
Team Process Design Project
The aims of this module are to further develop knowledge and understanding of chemical engineering principles and practice through the detailed design study of a more traditional chemical process.
Chemical Process Control
The aims of this module are:
- To develop the student's expertise in analysing and controlling time-varying process systems
- To impart detailed knowledge of the quantitative features of the subject in relation to the operations encountered on process plant
Optional
Operations Management
- to provide an understanding of the production/operations management function in both manufacturing and service industries
- to introduce students to the key issues and techniques in operations management
- to provide a wider scope of operations management in terms of its application and the interface between production, supply chain management and the use of IT and modern technology on operations.
Polymer Engineering - Processing and Manufacture
The aim of the module is to illustrate the principles and practice of engineering science applied to the processing and manufacture of products based on polymers (plastics and rubbers).
Healthcare Engineering
Semester 1 & 2
Optional
Water Resources, Sustainability and Climate Change
The aims of this module are for the student to understand:
- the basic principles of environmental processes and water pollution resulting from human activities,
- the range of suitable technologies for water treatment and distribution and the range of suitable technologies for collection, treatment and disposal of liquid and solid wastes,
- the physical mechanisms that lead to the transport of both chemical and biological contaminants in groundwater,
- the various remote sensing technologies for monitoring and measuring surface water quality,
- Geographic Information System (GIS) applications in water resources management,
- the principles and practice of integrated water resources management; the impacts of climate change on water resources and the development of adaptation strategies, and
- the measures being taken under the global sustainable development goals to ensure availability and sustainable management of water and sanitation for all.
How you'll study
- Lectures
- Tutorials
- Independent study
- Group work
- Supervision
- Workshops
- Laboratory work
- Practical sessions
How you'll be assessed
Our course offers a good balance between knowledge and application-based assessments.
Overall, around 50% of assessments are exam-based, but the proportion reduces slightly from the first to final year. The other half of our assessments are in the form of coursework, both individual and in groups, such as reports, oral presentations, posters or software files. These are excellent opportunities to develop essential communication and team working skills and receive detailed verbal or written feedback.
Placement year
This course includes the option to complete a paid year (typically over £17,000) working in industry. Our close links with industrial partners enable us to provide our students with considerable help in sourcing and securing their placement.
Placements are an excellent opportunity to gain real-world experience and apply the knowledge from the degree in practice. Many of our students return with a much better understanding of the wider context of the modules that they have studied, and generally perform better in their final year(s) of study.
In addition, the placement year gives students an opportunity to ‘test drive’ an industrial sector, giving them insight into what they can expect from a graduate position before having to commit to a longer-term career. Placements are a great stepping-stone into a permanent job, with many of our students returning to their placement employer as a graduate, having demonstrated their worth to the organisation.
Additional award
By undertaking a year on professional placement or working in industry, you will gain an additional award alongside your final qualification. If you undertake a professional placement year you will gain a Diploma in Professional Studies (DPS) or if you complete a year in industry you will gain a Diploma in Industrial Studies (DIS).
Placement year destinations
Students join placement companies of a variety of sizes and sectors, from pharmaceuticals, food and drink, to energy and general engineering companies. Recent placement host companies include: 3M, Centrica, ExxonMobil, GSK, Jacobs Douwe Egberts, PepsiCo, Pfizer, Procter and Gamble, and Unilever.
Where you'll study
We have recently invested £25 million into the facilities in our S-Building, home to our Chemical Engineering Department, offering students state-of-the-art facilities with to the chance to experience real-life industrial processes.
We have world-class laboratories which allow you to gain practical, hands-on experience with industry-scale equipment. With over 50 experimental rigs, our labs offer an enhanced learning experience, allowing students to develop key practical skills. We are also proud of our interactive virtual reality facility – the Igloo, which uses unique simulation software to allow you to explore, as a team, the operation of real-life industrial processes within a safe and accessible environment.
For taught sessions, we also have a new 87-seat IT laboratory, loaded with all the required software needed for your course. This can also be used for private study and project work.
In addition to this, STEMLab is a state-of-the-art laboratory facility that opened in 2017. It forms part of a wider £25M investment in the West Park of our campus, the home of our Engineering Schools, which includes an adjacent student learning and teaching hub. STEMLab offers new ways to learn and collaborate, with a ‘drop-in’ engineering workshop, teaching laboratories, workshops, computer-aided design and rapid prototyping facilities, a design studio and informal learning spaces. These enhanced facilities further increase our ability to train and develop skilled graduates that are targeted by major employers from across the world.
Entry requirements
To learn more about the qualifications we typically accept, please select your country from the drop-down menu below.
General entry requirements
The entry requirements for each course should be read alongside the University’s general entry requirements which give further details on acceptable subjects, alternative UK and international qualifications and minimum English language requirements.
Contextual admissions
The University’s admissions process uses contextual information to provide insights into the context in which your academic qualifications have been achieved. This may influence the typical offers listed below.
United Kingdom
- Typical A level offer
-
AAB including Maths and at least one from Chemistry or Physics
- Typical IB offer
-
35 (6,6,5 HL) including Maths and at least one from Chemistry or Physics at HL
- Typical BTEC offer
-
BTEC Level 3 National Diploma in a relevant subject: DD plus A Level Maths at grade B
BTEC National Extended Certificate in Applied Science or Engineering: D plus A levels AB to include Maths and either Chemistry or Physics
BTEC National Diploma in Applied Science or Engineering: DD plus A levels AB to include Maths and either Chemistry or Physics
BTEC National Extended Diploma in Applied Science or Engineering: DDD plus A level Maths at Grade B
- GCSE
-
GCSE English Language Grade 4/C
- Reduced contextual offer
-
Meeting specific eligibility criteria guarantees that if you are made an offer, it will be reduced by up to two grades. Find out more about Access Loughborough Contextual Offers.
Preferred subjects
BTEC: Applied Science, Engineering
Selection
Applicants are usually selected based on their UCAS application, but in exceptional cases, an interview may be required. If applicants are made an offer of a place, they will be invited to visit the department giving them the opportunity to meet staff and students, see facilities and get an insight into what it is like to be a student at Loughborough.
Many of our courses receive a large number of applications for each available place. We cannot unfortunately always make offers to all applicants who are predicted to achieve/have achieved grades in line with our advertised typical offers.
Australia
Typical offers for students from Australia are based on the Australian Tertiary Admissions Rank (ATAR). Typically, we would require a score between 85.00 and 94.00. For students from Queensland, requirements from the Overall Position (OP) would typically be between 8 and 4.
Further to the above, students would normally be required to pass one of the following qualifications:
- ACT Year 12 Certificate
- New South Wales Higher School Certificate (HSC)
- Northern Territory Certificate of Education (NTCE)
- Queensland Certificate of Education (QCE)
- South Australian Certificate of Education (SACE)
- Tasmanian Certificate of Education (TCE)
- Victorian Certificate of Education (VCE)
- Western Australian Certificate of Education (WACE)
Where courses have specific subject requirements, these will be expected to be studied within one of the above qualifications. Grades of ‘B’ (ACT, NTCE, SACE, VCE, WACE), ‘4’ (HSC), ‘CA’ (TCE), ‘HA’ (QCE) or higher will normally be required.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Austria
For students taking the Austrian Reifeprüfung (Matura), we typically require an average score between 2.2 and 1.2 from 6 written or spoken exams. Where courses have specific subject requirements, a score of 2 or 1 will normally be required in each.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Bahrain
Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements
Belgium
The Certificat d’Enseignement Secondaire Supérieur (CESS) and Diploma van Secundair Onderwijs (DSO) are both acceptable qualifications for direct entry into first year undergraduate courses. We typically require an overall score ranging from 75% to 85%. Where the 20 point marking scale is used, we would typically require marks between 15/20 and 17/20.
Specific subject marks may be required for some courses and where this is the case, this should be studied as a 4 hour subject. Where courses require achievement in GCSE Maths, we would normally look for a score of 50% or higher in Maths within the CESS or DSO.
Students currently studying the Abschlusszeugnis der Oberstufe des Sekundarunterrichts should contact the Undergraduate Admissions Office for further details.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Brazil
Students taking the Brazilian High School Certificate(Certificado de Ensino Médio and Exame Nacional do Ensino Médio – ENEM) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Brunei
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Bulgaria
For students taking the Diploma za Sredno Obrazovanie, we would typically ask for an overall score ranging from 5.3 - 6.0 overall with specific subject marks required for some courses.
Where courses require achievement in GCSE Maths, we would normally look for a score of 4.5 or higher in Maths within the Diploma za Sredno Obrazovanie.
All students must also achieve the University’s English language requirements.
Canada
Typical offers for students from Canada are based on having completed Grade 12. The information below outlines the requirements for different states:
Alberta, Northwest Territory, Nunavut
- Typical offers are based on an average of best 5 grade 12 courses in the General High School Diploma and offers typically range from 80% - 93%.
- Where courses require specific subjects, these should be taken as thirty-level courses. Where A Level Maths is a course requirement, both Mathematics 30-1 and Mathematics 30-2 should be completed.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
British Columbia, Yukon Territory
- Typical offers range from ‘BBBBBB’ – ‘AAAAAA’ from best 6 grade 12 subjects in the Senior Secondary Graduation Diploma.
- Where courses require specific subjects these would normally need to be achieved at ‘A’ or ‘B’.
- Where courses require achievement in GCSE Maths, we would normally look for a score of ‘C’ or higher in grade 10 Maths.
Manitoba
- Typical offers are based on an average of best 5 subjects at 300 level in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
New Brunswick, Prince Edward Island, Quebec, Saskatchewan
- Typical offers are based on an average of best 5 grade 12 subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses. Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
Newfoundland & Labrador
- Typical offers are based on an average of best 5 university preparatory level subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
Nova Scotia
- Typical offers are based on an average of best 5 subjects at level 4 or 5 in the High School Completion Certificate and offers typically range from 80% - 93% with specific subject marks required for some courses.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
Ontario
- Typical offers are based on an average of best 6 grade 12 courses at ‘4U’, ‘4M’ or ‘DU’ in the Ontario Secondary School Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.
Quebec
- Typical offers range from 80% - 93% overall in the Diplome d'Etudes Collegiales with specific subject marks of 80% - 96% required for some courses.
- Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 11 Maths.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
China
Students taking the Senior Middle Examinations will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
We will also accept a first year of study at a recognised university of appropriate standing within China as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.
All students must also achieve the University’s English language requirements.
Croatia
For students taking the Croatian Matura (Svjedodžba o Maturi), we typically require an average score between 4.0 and 5.0.
Where courses have specific subject requirements, a score of 4 or 5 will normally be required in each. For courses that require Maths as part of their A Level offer, this should be taken at extended level in the Matura.
All students must also achieve the University’s English language requirements.
Cyprus
The Apolytirion is not accepted for direct entry to the University when studied on its own. However, we are happy to consider students taking the Apolytirion alongside either 1 or 2 A Levels. For courses with typical offer requirements of ‘ABB’, we would typically require 19.5 in the Apolytirion alongside an ‘A’ at A Level or 18.0 in the Apolytirion alongside ‘AB’ at A Level. Where courses require specific subjects, these must be taken at A Level.
Where courses require achievement in GCSE Maths, we would normally look for a score of 17 or higher in Maths within the Apolytirion.
Students taking the Apolytirion without additional A Levels will need to complete a suitable Foundation Year. Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
All students must also achieve the University’s English language requirements.
Czech Republic
For students taking the Czech Maturita (Vysvědčení o Maturitní Zkoušce), we typically require an average ranging from 2.00 to 1.00 from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.
All applicants must also achieve the University’s English language requirements.
Denmark
For students taking the Bevis for Studentereksamen (STX), typical offers range from 8.0 to 10.5 in the weighted average mark from the STX. Some courses may require marks (either 10 or 12) in specific Level A subjects.
Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Level C Maths with the STX.
Students who have taken the Studentereksamen under the old grading system would be considered on a case by case basis with an average between 9.0 and 11.0 normally required.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Egypt
Students who have studied the Thanaweya A’ama (Certificate of General Secondary Education) will need complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Estonia
For students taking the Gümnaasiumi lõputunnistus with the Riigieksamitunnistus, we typically require a high average grade between 4.3 and 4.8 in the Gümnaasiumi lõputunnistus as well as an average percentage between 77% and 90% in the Riigieksamitunnistus.
Specific subject marks may be required for some courses. For Engineering and Science courses, we would expect students to have studied Lai Matemaatika.
Students with a score of 4.0 with 70% average from state exams would be considered on a case by case basis for the Loughborough University Foundation Year
All students must also achieve the University’s English language requirements.
European Baccalaureate
For students taking the European Baccalaureate, we typically require an overall average mark between 78% and 88% with specific subject marks (normally 8.0 or higher from a 4 or 5 period subject) required for some courses.
Where courses require achievement in GCSE Maths, we would normally look for a score of 6.5 or higher in Maths 3.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details. When applying, please state whether you are taking English as Language 1, 2, 3 or 4.
Faroe Islands
Students taking the Studentsprógv would normally be required to achieve a score between 8.0 and 10.5 with specific subject marks (either 10 or 12) required for some courses.
All students must also achieve the University’s English language requirements.
Finland
For students taking the Ylioppilastutkinto / Studentexamen, typical offer requirements would normally be based on achievement in best 4 subjects. Offers will typically be expressed as four letter grades ranging from MMMM (achieve Magna cum laude approbatur or higher in four subjects) to LEEE (achieve Eximia cum laude approbatur or higher in four subjects with at least one subject at Laudatur).
Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Lukion Päästötodistus
All students must also achieve the University’s English language requirements.
France
For students taking the new French Baccalauréat Général (assessed from 2021 onwards), we typically require an overall result between 13.0 – 15.5 with results of 14-15 in two speciality subjects. Specific speciality subjects are required for some courses.
Students following the Option Internationale (OIB) will often receive a slightly lower offer.
Where courses require achievement in GCSE Maths, we would normally look for a score of 10 or higher in Mathematics taken in Year 12 as a Speciality Subject (Première) or a score of 11 or higher in Additional Maths taken as an Option in Year 13 (Terminale).
Students taking the Baccalauréat Technologique will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Germany
Students taking the Abitur typically require an overall score ranging from 1.3 - 2.0 with specific subject marks required for some courses (normally between 12and 15).
Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Abitur.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Ghana
Students taking the WASSCE will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Greece
Students taking the Greek Apolyterion are normally required to also take the Panhellenic Exams. Typical offers are based on the General Access Grade in the Panhellenics and range from 16.5 to 19.0 depending on the course applied for. Where courses have specific subject requirements, these should be taken as ‘Direction’ subjects within the Panhellenics. Students applying for Science or Engineering courses would generally be expected to have followed the Sciences direction. We will also normally ask for a mark between 17.0 and 19.0 in the Apolyterion certificate.
Students who have studied 1 or 2 A Levels alongside the Apolyterion (without taking the Panhellenic Exams) would normally be required to obtain high grades in their A Level exams along with an average mark of between 17.0 and 19.0 in the Apolyterion. Where courses have specific subject requirements, these should be taken as A Levels.
Students taking a Foundation course alongside the Apolyterion will be considered on a case by case basis.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
All students must also achieve the University’s English language requirements.
Hong Kong
Typical offers for students taking the HKDSE vary by course and range from ‘5, 4, 4’ – ‘5*, 5, 5’ from best 3 subjects, of which 2 must be electives and excluding Liberal Studies and Chinese. Where courses require specific subjects, we would be looking for grades between ‘4’ and ‘5*’ in these subjects.
For courses that require Maths as part of their A Level offer, this should be taken at extended level in the HKDSE. Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in core Maths.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Hungary
For students taking the Hungarian Matura (Érettségi Bizonyítvány), we typically require an average ranging from 70% to 83% from best 5 subjects which must include at least 2 higher level exams.
Where courses have specific subject requirements, a score of between 70% and 90% would normally be required in a higher level exam.
All students must also achieve the University’s English language requirements.
Iceland
For students taking the Stúdentspróf, we typically require an overall grade between 8.0 and 9.3 with specific subject marks (between 8 and 10) required for some courses.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
India
Typical offers are based on the Standard XII school leaving qualifications. When awarded by CBSE, ISCE or West Bengal Exam Boards, we typically ask for results in the region of 78% - 88% average performance from best 4 subjects. For other state boards, we would be looking for achievement between 83% - 93% from best 4 subjects. Specific subject marks at Standard X or Standard XII may be required for some courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Indonesia
Students who have studied the Ijazah: Sekolah Menengah Atas/Madrasah Aliyah (SMA/MA) will need complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Ireland
Students who have taken the Leaving Certificate under the new grading system (post 2016) would normally be required to achieve 5 higher level passes with grades ranging from H2 H2 H3 H3 H3 to H1 H1 H2 H2 H2. Where courses have specific A Level subject requirements, these should be taken at higher level.
If you have taken the Leaving Certificate under the old grading system (pre 2016) our typical offers would be between B1 B1 B2 B2 B2 and A1 A1 A2 A2 A2.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Israel
For students taking the Bagrut, we would require students to have studied at least 21 study units. Typical offers will be based on average percentage from 3 best 5-unit level subjects with requirements ranging from 78% to 92% depending on the course. Please note that we do not use the Optimal Average and do not consider bonus points as part of our offers.
Where courses have specific subject requirements, we would expect these to be studied as a 5-unit subject and look for achievement between 80% and 95%.
All students must also achieve the University’s English language requirements.
Italy
For students taking the Diploma di Esamo di Stato, we typically require an overall score ranging from 85% - 98% overall. Where courses require specific subjects, we would be looking for marks between 8 and 10 in school assessment.
Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in school assessment for Maths.
Students taking the Diploma di Istituto Tecnico will be considered for first year entry on a case by case basis where subjects studied are relevant to the course for which they have applied.
All students must also achieve the University’s English language requirements.
Japan
Students taking the Kotogakko Sotsugyo Shomeisho (Upper Secondary School Leaving Certificate) will need to complete a suitable Foundation Year
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
We will also accept a first year of study at a recognised university of appropriate standing within Japan as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Jordan
Students taking the Tawjihi (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
Students must also achieve the University’s English language requirements.
Kazakhstan
Typical offers for students from Kazakhstan are based on the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate. Typically, we would require a score between AAA and BBB from Advanced level subjects. Where courses have specific subject requirements, these will be expected to be studied at Advanced level.
English language studied within the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate is not sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Kenya
Students taking the Kenya Certificate of Secondary Education will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Kuwait
Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Latvia
For students taking the Atestāts par Vispārējo Vidējo Izglītību, we typically require a high average grade between 9.2 and 10.0 as well as an average between 87% and 95% from best 4 state exams.
Where courses have specific subject requirements, a score between 87% and 95% will normally be requested in state exams in these subjects.
Students with a score of 8.0 with 80% average from best 4 state exams would be considered on a case by case basis for the Foundation Year.
All students must also achieve the University’s English language requirements.
Lebanon
Students taking the Baccalauréat Général will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
Students must also achieve the University’s English language requirements.
Lithuania
For students taking the Brandos Atestatas, typical offers generally range from 9.0 – 10.0 overall. We would also typically ask for an average percentage from the best 3 state exams between 80% and 94%. Where courses require specific subjects, we would typically require these to be taken as state exams.
Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in school assessment for Maths.
All students must also achieve the University’s English language requirements.
Malaysia
For students taking either the Matrikulasi (Matriculation Certificate) or the Sigjil Tinggi Persekolahan Malaysian (STPM), we would typically require grades ranging from AAA-BBB from best 3 (core) subjects excluding general studies.
Where courses require achievement in GCSE Maths, we would normally look for a grade C or higher in SPM (Sijil Pelajaran Malaysia) Maths.
For students taking the Unified Examination Certificate (UEC) we would typically require from the best 7 subjects grades ranging 2xA1 5xA2 to 7xB3 in the UEC-SML. Where courses require achievement in GCSE Maths, we would normally look for a grade B6 or higher in Maths.
- Students taking the MARA Diploma will be considered for first year entry on a case by case basis.
- Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Malta
For students taking the Advanced Matriculation Exam, typical offers would normally be based on achievement in 2 advanced level subjects (typically between BB and AA) and 3 intermediate level subjects excluding Systems of Knowledge (typically between BCC and AAA).
Where courses have specific subject requirements, a score of B or A will normally be required in an Advanced Level subject. Where courses require achievement in GCSE Maths, we normally look for a score of 4 or higher in Maths within the Secondary Education Certificate (SEC).
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Netherlands
For students taking the Voorbereidend Wetenschappelijk Onderwijs (VWO)., typical offers range from 6.6 to 7.4 average from the VWO with specific subject marks (between 7 and 9) required for some courses.
Students applying for Science or Engineering courses would generally be expected to have followed the Natuur en Techniek stream within the VWO and have taken the Maths D course.
Where courses require achievement in GCSE Maths, we would normally look for a score of 5 or higher in Maths within the VWO.
Students taking the Middelbaar Beroepsonderwijs (MBO Level 4) certificate will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for. Please contact the Undergraduate Admissions Office for further details.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
New Zealand
For students taking the National Certificate in Educational Achievement (NCEA) Level 3 typical offers will be based on overall achievement in the NCEA plus a required number of credits achieved at the next level up. For example, where A Level requirements are ABB, we would normally require a Merit overall with 20 Level 3 credits achieved at Excellence.
Where courses have specific subject requirements, these should be studied at Level 3 within the NCEA. Typically, an overall achievement of Merit or Excellence will be required in these subjects.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Nigeria
Students taking the WASSCE will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Norway
For students taking the Vitnemål for Videregående Opplæring, typical offers range from 4.00 to 5.25 average of all Final Assessment Grades.
Where courses have specific subject requirements, students will need to achieve a 4 or higher in at least two 140-hour courses.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.
Oman
Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Pakistan
Students taking the Intermediate/Higher Secondary School Certificate (HSSC) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Poland
For students taking the new Matura typical offers are based on average achievement from 3 extended level exams and offers normally range from 75% - 85%. Where courses require specific subjects, these should be taken as extended level exams and we would normally look for marks between 75% and 90%.
Where courses require achievement in GCSE Maths, we would normally look for a score of 68% or higher in the compulsory standard level Maths.
All students must also achieve the University’s English language requirements.
Portugal
Students taking the Diploma de Ensino Secundário would normally be required to achieve a score between 16 and 18 with specific subject marks (between 17 and 19) required for some courses.
Where courses require achievement in GCSE Maths, we normally look for a score of 14 or higher in Maths within the Diploma de Ensino Secundário.
All students must also achieve the University’s English language requirements.
Qatar
Students taking the Shahadat Al-Thanawaya Al-Aama (Senior School Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Romania
For students taking the Diploma de Bacalaureat, typical offers range from 8.6 – 9.4 overall. Where courses require a specific subject, we would be looking for this to be studied as the optional subject within the Diploma de Bacalaureat with marks between 8.6 and 9.8.
Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Grade 10 Maths from the ‘Foaie Matricola’ or 6.5 or higher in Maths from the Diploma de Bacalaureat.
All students must also achieve the University’s English language requirements.
Russia
Students taking the Certificate of Unified State Examination will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Saudi Arabia
Students who have studied the Tawjihiyah (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Singapore
For students with Singapore A Levels, typical offers normally range from BBC to AAA from three H2 Level subjects and offers are typically one grade lower than the typical A Level requirement as stated in the undergraduate prospectus due to the comparative difficulty.
Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required in line with UK A Level requirements.
Students with a Diploma from one of Singapore’s five Polytechnics would be considered for first year entry with requirements ranging from 2.50 to 3.10. Second year entry may be considered in some cases. Please contact the International Office to check if this is applicable.
For IB requirements please see the undergraduate prospectus.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Slovakia
For students taking the Slovakian Matura (Vysvedčenie o maturitnej skúške), typical offers range from 2.00 to 1.00 average from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.
All students must also achieve the University’s English language requirements.
Slovenia
For students taking the Maturitetno Spričevalo., we typically require an overall total score of between 22 and 30 out of 34.
Where courses have specific subject requirements, a score of 4 or 5 will normally be required in each. Applicants for Science or Engineering courses would normally be required to take Maths at higher level and would be required to achieve a mark of between 6 and 8.
All students must also achieve the University’s English language requirements.
South Africa
For students taking the National Senior Certificate (NSC), typical offers range from 6,6,6,6,6 to 7,7,7,7,7 from the best 5 subjects, excluding Life Orientation.
Where courses have specific subject requirements, a score of 6 or 7 would normally be required.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
South Korea
Students taking the High School Diploma will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Spain
For students taking the Titulo de Bachillerato, we typically require an overall score of 7.50 – 9.50.
Where courses have specific subject requirements, a score of 8.00 or 9.00 will normally be required in each. Where courses require achievement in GCSE Maths, we would normally look for a score of 5.50 – 6.50 within the Titulo de Bachillerato.
All students must also achieve the University’s English language requirements.
Sri Lanka
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
Sri Lankan A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Sri Lankan A Levels, an A grade is acceptable to meet this requirement where applicable.
All students must also achieve the University’s English language requirements.
Sweden
For students tasking the Avgångsbetyg / Slutbetyg från Gymnasieskola, typical offers are normally based on an average score from 2500 credits with an ‘A’ counting as 20 points, a ‘B’ counting as 17.5 points, a ‘C’ counting as 15 points etc. Typical offers range from 16.0 to 18.8 average from 2500 credits.
Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required from 2 relevant subject modules within the Slutbetyg.
Students who took the Avgångsbetyg / Slutbetyg från Gymnasieskola under the old grading system are considered on a case by case basis with most courses requiring a majority of ‘VG’ and ‘MVG’ grades.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Switzerland
Students taking the following qualifications would be considered for direct entry to undergraduate courses: Certificat de Maturité, Maturitätsausweis, Attestato di Maturità. Typical offer requirements are based on average achievement from best 12 subjects and offers typically range from 4.8 – 5.5. Where courses require specific subjects, we would be looking for marks between 5.0 and 6.0 in school assessment.
Where courses require achievement in GCSE Maths, we would normally look for a score of 4.0 or higher in school assessment for Maths.
English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Taiwan
Students taking the Senior High School Diploma will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Alternatively, Junior College Diploma holders may be considered on a case by case basis for entry to undergraduate courses.
All students must also achieve the University’s English language requirements.
Tanzania
The Advanced Certificate of Secondary Education Examination (ACSEE) is acceptable for entry into the first year of undergraduate courses. Typical offers are the same as for UK A Levels as stated in the Undergraduate Prospectus.
For courses which require achievement in GCSE Maths, we normally look for a score of C or higher in Maths in the Certificate of Secondary Education (CSE).
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Thailand
Students taking the Certificate of Secondary Education/Maw 6 will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
The Caribbean
For students taking the Caribbean Advanced Proficiency Examination (CAPE), we typically require a range from ‘2, 2, 2’ - ‘1, 1, 1’ achieved from three 2-unit exams with specific subject marks of ‘1’ or ‘2’ required by some courses
Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in Caribbean Secondary Education Certificate (CSEC) Maths.
Requirements for American SATs and APs can be found under the country requirements for USA.
English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
The Gulf
Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Turkey
For students taking the Anadolu Lisesi (Anatolian High School Diploma) or Fen Lisesi (Science High School Diploma), will typically require a pass mark of higher than 80%,
Students taking the Lise Bitirme Diplomasi, will be considered for first year entry on a case by case basis.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
Uganda
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. The Uganda Advanced Certificate of Education (UACE) is also acceptable with grades equivalent to the typical A Level offer requirements.
English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.
Ukraine
Students taking the Atestat pro Povnu Zagal'nu Sersdniu Osvitu/Certificate of Complete General Secondary Education will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
We will also accept a first year of study at a recognised university of appropriate standing within Ukraine as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.
All students must also achieve the University’s English language requirements.
United Arab Emirates
Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.
All students must also achieve the University’s English language requirements.
United States of America
For students studying in the American education system, typical offers for entry onto undergraduate level courses are based on obtaining 3.2 in the High School Diploma along with achievement in Advanced Placement Exams or SAT II Subject Specific Tests. We would typically require between ‘4, 4, 4’ and ‘5, 5, 5’ in 3 AP exams or between ‘650, 650, 650’ and ‘750, 700, 700’ in 3 SAT subject tests.
Where courses have an A Level maths requirement, it would be necessary for applicants to achieve a high mark in AP Calculus BC or SAT Math Level 2. For programmes that require achievement in GCSE Maths, we would normally look for a score of ‘570’ or higher in SAT I Math or ACT with a minimum score of 27 overall and 26 in each component.
To satisfy English language requirements, we normally ask for a score of ‘610’ in SAT I Evidence-Based Reading/Writing or ACT with a minimum score of 27 overall and 26 in each component. Some programmes have higher requirements.
Vietnam
Students who have studied the Bằng Tốt Nghiệp Phổ Thông Trung Học will need to complete an appropriate Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements.
Zambia
Students who have studied the General Certificate of Education will need to complete a suitable Foundation Year.
Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.
All students must also achieve the University’s English language requirements
Zimbabwe
Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses.
Please see the undergraduate prospectus for specific course requirements.
Zimbabwe A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Zimbabwe A Levels, an A grade is acceptable to meet this requirement where applicable. Typical offers for students taking the Zimbabwe A levels exclude the General Paper.
All students must also achieve the University’s English language requirements.
Tuition fees for 2023 entry
UK fees
- Full-time course per annum
- £9,250
- Placement year
- Approx. 20% of the full-time fee
International fees
- Full-time course per annum
- £27,250
- Placement year
- Approx. 20% of the full-time fee
The UK fees stated above may be subject to change following government review. We will update this information as soon as it is available. Fees are reviewed annually and are likely to take into account inflationary pressures.
Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, IT equipment and other support services. University fees and charges can be paid in advance and there are several methods of payment, including online payments and payment by instalment.
Additional costs
While the cost of your tuition covers lots of things, it doesn’t cover everything. For instance this course doesn’t cover the cost of any stationery, printing, books or re-assessments which you might need.
Your future career
Average starting salary
£30,000
Graduate Outcomes Survey, 2018 graduatesWith a degree in Chemical Engineering from Loughborough, you can expect to have gained the chemical engineering knowledge necessary to meet the needs of industry, alongside a diverse skill set. This will include project management, teamwork, leadership, business acumen and people management, as well as technical expertise, setting you up for a successful career.
Our graduates have gone on to pursue a diverse array of exciting and rewarding careers with a wide range of employers. Others have gone on to pursue their research interests by undertaking a PhD.
Most of our graduates are employed by companies covering different processing sectors, such as energy and water, food and drink, pharmaceuticals, plastics and consumer products. We have an excellent reputation with industry and many of these companies favour Loughborough as a source of chemical engineers. However, some of our graduates choose to take up careers in areas such as finance and business, using their strong transferable skills developed during their degree.
Careers Fair
The School holds its own Careers Fair. In recent years, over 50 companies have attended the Careers Fair to employ our students. This includes major consulting and contracting companies in the UK, as well as more local and specialist firms.
Career support services
Your time at Loughborough University will form a launchpad from which you can build an exciting career. With so many opportunities available, you’ll never be short of ways to improve your employability.
Our award-winning Careers Network team is here to help and support you, offering everything from CV workshops, one-to-one advice sessions and mock interview practice sessions to high-profile employer events. We’ve got everything you need for a really successful future.
Companies students have worked for after graduating
Students have gone on to take various roles within different companies after graduating including: 3M, Astra Zeneca, British Sugar, Exxon Mobile, Ford, GSK, Jaguar Land Rover, Johnson Mathey, Perenco, Proctor & GambleSellafield, Shell Trading & Drilling.
Contact us
or