Mechanical Engineering BEng (Hons) DIS/DPS/DIntS degree BEng (Hons) degree

4 years full-time with placement year

Typical offer
AAB
UCAS code
H301
Institute code
L79
Start date
28 September 2020
UK / EU fee
£9,250
International fee
£22,350
Typical offer
AAB
UCAS code
​H300
Institute code
L79
Start date
28 September 2020
UK / EU fee
£9,250
International fee
£22,350

The fees stated above are for the 2019/20 academic year; fees for 2020/21 have not yet been confirmed by the UK government. We will update this information as soon as it is available.

Overview

Mechanical Engineering applies the principles of physics to the analysis, design, and maintenance of mechanical systems. It defines how and why mechanical systems work, define how long a mechanical system will work, and predict when they will fail.

Mechanical Engineers are at the heart of a broad spectrum of UK and international industrial sectors. They design and specify products ranging from mobile phones to bullet trains, and work extensively in the nineteen IMechE defined mechanical engineering industrial sectors.

Covering an extensive range of disciplines from Dynamics and Control, to Stress Analysis Heat Transfer and Thermodynamics, a diverse array of engineering science based subjects are experienced that provide technical expertise and integration of skill sets. Mechanical Engineering takes advantage of other engineering disciplines, blending Materials Science, Electronics and Software Engineering with the core subjects.

For further insight into what you can expect to study on our Mechanical Engineering degree please take a look at the modules listed below.

What's the difference between MEng and BEng?

Our IMechE accredited BEng Mechanical Engineering degree courses provide a balanced, theoretical and practical introduction to fundamental engineering principles and their application to real industrial projects.

The first two years are common to the MEng structure and provide you with engineering science core skills, combined with engineering design and computational modules. The application of engineering science and the solution of industrial problems is a strong theme throughout the courses. This is practised within the 2nd year Industrial Based Design Project.

Throughout the three academic years of the courses, skills are developed across all of these areas. Students studying on the BEng course may have opportunity to change to the MEng course if their performance in the first and second year is sufficiently strong.

The courses provide an excellent platform for graduates wishing to register with the Engineering Council as an Incorporated Engineer or to progress to Chartered Engineer status, while the transferable skills which graduates develop should also suit them to employment and career routes in a wide variety of professions.

Show more

Why you should choose us

Why you should study this course

Choosing to study our Mechanical Engineering degree will put you in a position to understand how things work, why things work, how long they will work for, when will they fail, and how to make them work longer and better.

You will develop skills in CAD, Control, Dynamics, Heat Transfer, Mechanics, Statics, Thermodynamics, and more, all leading you to an ability to design and understand behaviour of mechanical products and technologies. This will allow you to specialise in technical streams within companies small and large, or develop a technical management career in national and multi-national companies.

Tour of Wolfson building

Professional recognition

Our BEng (Hons) Mechanical Engineering degree is fully accredited by the Institution of Engineering and Technology (IET), and the Institution of Mechanical Engineers (IMechE).

What you'll study

Excited to learn more? For a taster of what you can expect to study on our Mechanical Engineering BEng (Hons) degree, take a sneak preview of some of the modules you may have the opportunity to study below.

The information below is intended as an example only, featuring module details for the current year of study. Modules are reviewed on an annual basis and may be subject to future changes – revised details will be published through Programme Specifications ahead of each academic year. Please see Terms and Conditions of Study for more information.

The first academic year of the BEng course gets you up to speed with the core subjects around Mechanical Engineering. All the modules during this year are compulsory, to ensure a solid foundation in your knowledge is established ahead of progressing into the second academic year.

Semester 1 & 2

Mathematics for Mechanical Engineering

Students are equipped with the basic mathematical tools useful in engineering and are able to demonstrate how mathematics can be used in engineering.

Statics & Dynamics

This module aims to develop student’s ability to predict the effects of force and motion.

Engineering Principles & Professional Skills

This module promotes engagement with he programmes and motivates students to study as successful learners in a higher education setting. Students are introduced to and assisted with self-reflection and goal setting aligned with Personal Best. Students are also introduced to the role of the professional engineer and are taught the principles of graphical language of engineering drawing and dimensioning to British standards and to develop 2D and 3D visualisation skills.

Materials & Manufacturing Processes

Students are introduced to the fundamental properties of engineering materials through an understanding of the atomic and molecular interactions taking place within them. Students are also introduced to the technology of manufacturing processes and how their selection is influenced by and subsequently affects the material properties.

Thermodynamics and Fluid Mechanics

Students are introduced to the definitions used in Thermodynamics and Fluid Mechanics. This module explores the study of fluid properties and the conceptual development of the First Law of Thermodynamics for cycles, closed and open systems together with their application to a wide range of engineering equipment.

Semester 1

Electronic Systems for Mechanical Processes

The aim of this module is for students to gain fundamental appreciation of electronics systems and devices and to be confident to use standard electronics devices for circuit design and implementation.

Semester 2

Mechanics of Materials

The primary aim of the study of engineering mechanics is to develop in students a capacity to predict the effects of force and motion on engineering materials.

The second academic year of the BEng course builds on the Mechanical Engineering core knowledge developed during Year 1.

Semester 1 & 2

Engineering Computation

To improve computer literacy and to develop the ability to solve 'real' engineering problems by numerical methods.

Application of Engineering Design: Industry Based Project

Students develop the fundamental transferable skills and methodologies needed for creating conceptual solutions to real design problems in an industrial context.

Semester 1

Mathematics for Mechanical Engineering

Students are given an understanding of some advanced mathematical techniques which are applicable to problems in mechanical engineering. This module aims to ensure student are competent in doing calculations using these techniques.

Mechanics of Materials 2

The aim of this module is to consolidate and build on the ideas and skills introduced in the first year of engineering mechanics module. Students will be able to carry out strength and deflection analyses for a variety of simple load cases and structures, will understand the simplifications used in such analyses and appreciate the role of stress analysis and failure prediction in the design environment.

Engineering Dynamics 2

The aim of this module is to consolidate and build on the ideas and skills introduced in the first year of engineering mechanics module. Students will be able to develop their ability to model dynamic systems with particular reference to vibration analysis in practical engineering applications.

Control Engineering

Students are introduce to modelling of dynamic systems and the control processes with particular reference to common practical engineering problems and their solutions.

Thermodynamics 2

This module aims to build on the basic thermodynamics knowledge gained in the prerequisite module (MMA800) and apply to real thermodynamic problems.

Semester 2

Electrical Power and Machines

Students are given a basic understanding of electrical technology as used in mechanical engineering applications. Students are also introduced to electrical machines and power systems and their practical applications, supported by analysis/ synthesis methods of sufficient mathematical depth.

Design of Machine Elements

The aim of this module is to provide a grounding in the development of suitable and appropriate design processes for mechanical components, including the analysis thereof.

Computer Aided Design, Manufacture and Test (CADMAT)

The aim of this module is to enable students to experience a consolidated form of the product design cycle for a load bearing structure through manual optimisation. This encompasses initial concept generation, analysis and refinement through to manufacture and testing. This will be achieved through group project work involving a supporting lecture programme and problem-solving tutorials.

Heat Transfer

The aim of this module is to provide an introduction to the basic principles and practical applications of conduction, convection and radiation heat transfer.

Fluid Mechanics

Students develop their understanding of steady incompressible flow, fluid mechanics introduced in thermofluids 1 and 2. Students are provided an introduction to turbomachinery and unsteady flow problems. Students are also provided an understanding of compressible flow theory problems.

The final academic year of the BEng course is structured around the Individual Project, together with a Mechanical Engineering core. Further modules are chosen from the selection of additional optional subjects, with the opportunity to include modules from other courses within the university during the final academic year.

Semester 1 & 2

Individual Project

This module aims for students to practice engineering and/or technology in a simulated professional situation, developing the ability to work individually and apply knowledge gained in several subject areas in previous years.

Semester 1

Engineering Management: Finance Law and Quality

To enable students to understand the financial, legal and quality management principles that apply to the operational management of engineering organisations.

Computer Control and Instrumentation

The aim of this module is to give students confidence in the use of standard industrial programming languages when solving engineering problems and to acquire and process data on a computer. It also aims to produce increased awareness of the potential and limitations of computational devices as data gatherers, processors and controllers in mechanical engineering applications.

Applied Engineering Design & Analysis

Students are provided with an experience of working in a design team to undertake engineering analysis projects that are critical for the effective design process in the context of mechanical engineering.

Advanced Heat Transfer

Students develop conceptually the fundamentals of heat transfer due to conduction and radiation.

Energy Systems Analysis

Students strengthens and expands the students’ fundamental knowledge of thermodynamics and to apply these to develop a better understanding of energy systems

Laser Materials Processing

To provide students with in-depth knowledge of the use and application of lasers as a manufacturing tool in industry.

Robotics and Control

Students are provided with a comprehensive coverage of the theory of automation control and its application in the design of mechanical engineering plant and processes, and to provide an introduction to robotics.

Contacts Mechanics: Tribology

The aim of this module is to provide a fundamental understanding of the theory of hydrodynamic lubrication and classical Hertzian contact theory. An introduction is made to the mechanism of elastohydrodynamic lubrication. Important aspects of bio-tribology and nano-tribology are also briefly described.

Sustainable Manufacturing

The aim of this module is for the student to consider the impact that manufacturing has on the environment and to develop an understanding of the need for environmental legislation and the impact that the design process has on the quest for sustainable development.

Additive Manufacturing for Product Development

The module will introduce and develop the concepts of seven Additive Manufacturing (AM) process categories. The module will emphasise the strengths and weaknesses of the various technologies and will highlight applications and case studies from the Additive Manufacturing (AM) industry.

Semester 2

Vibration and Noise

Students develop an analytical understanding of complex vibrating systems based on an initial awareness of dynamic phenomena form early parts of the degree parts of the degree programme. Students are introduced to the basic principles of acoustics including measurement and analysis.

Kinematics & Dynamics of Machinery

The aim of this module is to reinforce and further develop concepts of kinematics and to apply formalised mechanics concepts to more realistic engineering situations.

Finite Element Analysis

To introduce students to the theory and practice of the finite element method, including capabilities and limitations of the finite element method and the practical problems involved in successfully modelling engineering structures and components.

Computational Fluid Dynamics

Students are introduced to the conservation principles for three dimensional flow calculations and are introduced to the computational techniques available to model industrial fluid dynamics and heat transfer problems.

Polymer Engineering: Processing and Manufacturing

The aim of the module is to illustrate the principles and practice of engineering science applied to the processing and manufacture of products based on polymers (plastics and rubbers).

Computer Aided Engineering

To enable students to use, evaluate, choose and implement CAE systems in the work environment.

Ballistics and Rocket Propulsion

The aims of this module are to further develop multidisciplinary engineering knowledge and gain an understanding of the principles of ballistics and rocket propulsion.

Materials in Service

The aim of the module is to give students an appreciation of the importance of factors such as corrosion, creep and fatigue on the performance of materials in service, and particularly steels.

Fracture and Failure

The aims of this module are to provide students with a basic knowledge of criteria which determine how materials may fail in service, together with an understanding of properties and measurements related to materials failure and fracture.

Internal Combustion Engines

The aim is to study the fundamentals of modern internal combustion engines with respect to performance, combustion, emissions and design. It aims to equip students with an up-to-date understanding of the subject, helping them to develop knowledge and skills which engineers require when entering industries involved in the design, development and use of internal combustion engines.

Industrial Machine Vision

Students familiarise themselves with modern digital image processing methods for image capture, enhancement, segmentation, analysis and machine vision for use in industrial applications.

How you'll be assessed

Lecture based modules are assessed by a combination of coursework and formal examinations taken at the end of each semester. Project module assessments require written reports and technical presentations, preparing you for your subsequent career. The proportion of coursework assessment is approximately 30% to 50% depending on degree course, semester/year and optional modules.

How you'll study

Teaching and learning methods include lectures, tutorials, practical work, seminars and extensive project work. The emphasis is placed on increasing your independence and encouraging you to develop your study skills while taking part in group activities.

  • Lectures
  • Seminars
  • Tutorials
  • Independent study
  • Group work
  • Workshops
  • Laboratory work
  • Practical sessions

Placement year options

We are the UK’s number one university for engineering placements sending over 15% more students on placement than any other university (2016/17 HESA UG Student Record: Engineering & Technology).

Additional award

By undertaking a year in placement or a year abroad, you will gain an additional award alongside your final qualification. If you complete an industrial placement year you will gain a Diploma in Industrial Studies (DIS). If you undertake a professional placement year you will gain a Diploma in Professional Studies (DPS) or if you study abroad for a year you will gain a Diploma in International Studies (DIntS).

Study abroad

If you are interested in travelling whilst you study, there are placement opportunities in other countries too, as well as options to spend from 3-12 months at an overseas university. By choosing this course you’ll have the option to take advantage of this exciting opportunity, giving you the chance to not only experience new cultures and visit new and exciting destinations, but to expand your learning experience. Learn more about the benefits here.

All students on the MEng courses have the opportunity to study abroad in their third or final academic year. If suitable for international study then this will lead to the award of a Diploma in International Studies (DIntS). A network of engineering departments from around 30 institutions throughout Europe cooperate in the European Credit Transfer System (ECTS).

Industrial placement year

This course can be taken with a salaried industrial placement after your second year of study and over 175 students take this option every year. For the award of a Diploma in Industrial Studies (DIS) you need to complete a minimum of 45 weeks work in a company.

We are notified of vacancies and opportunities throughout the academic year, and we provide support and help for you to gain a suitable placement.

Students work in a variety of organisations including automotive, aerospace, electronics, consumer goods, computer software and food processing industries.

Recent placement students have worked for virtually every major engineering company in the UK including; Toyota, Triumph, Rolls-Royce, BAE Systems, BP, Tata Steel, DERA, Vauxhall, The Boots Co. plc, Eurotherm Drives Ltd, 3M Healthcare, Schlumberger and TRW Lucas Aerospace.

Brett Friskney

Brett Friskney talks about his 12-month internship with Lubrizol.

Where you'll study

As a student on our Mechanical Engineering degree you will have access to a wide range of facilities.

Recent investments in our own building and STEMLab have given us exceptional facilities for our students. STEMLab is a state-of-the-art laboratory facility which arrived for our students in 2017. It forms part of a wider £25M investment in the West Park of our campus, the home of our Engineering Schools, which includes an adjacent student learning and teaching hub.

STEMLab allows us to offer new ways to learn and collaborate, with a ‘drop-in’ engineering workshop, teaching laboratories, workshops, computer-aided design and rapid prototyping facilities, a design studio and informal learning spaces. These enhanced facilities further increase our ability to train and develop skilled graduates that are targeted by major employers from across the world.

Typical offers

To learn more about the qualifications we typically accept, please select your country from the drop-down menu below.

Typical offers for United Kingdom

A-Level

AAB including Maths and Physics

IB

35 (6,6,5 HL) including Maths and Physics at HL

BTEC

BTEC Level 3 National Extended Diploma: D*DD in a relevant subject plus A Level Maths at grade A

Other

Practical Science is required

The typical offers and subject requirements for each course should be read alongside the University’s general entry requirements which give further details on acceptable subjects, alternative UK and international qualifications and minimum English language requirements.

Preferred subjects

BTEC Level 3 Diplomas preferred subjects: Aeronautical, Engineering, or Mechanical.

Selection

Applicants are selected on the basis of their UCAS application in order to assess academic potential beyond that provided as part of the application. An invitational visit also gives applicants the opportunity to visit, meet staff and students, see facilities and get an insight into what it is like to be a student at Loughborough.

Lithuania

Students with  Brandos Atestatas qualifications will be considered for direct entry to undergraduate degree courses. Please see the  for specific course requirements.

Australia

Typical offers for students from Australia are based on the Australian Tertiary Admissions Rank (ATAR). Typically, we would require a score between 85.00 and 94.00. For students from Queensland, requirements from the Overall Position (OP) would typically be between 8 and 4.

Further to the above, students would normally be required to pass one of the following qualifications:

  • ACT Year 12 Certificate
  • New South Wales Higher School Certificate (HSC)
  • Northern Territory Certificate of Education (NTCE)
  • Queensland Certificate of Education (QCE)
  • South Australian Certificate of Education (SACE)
  • Tasmanian Certificate of Education (TCE)
  • Victorian Certificate of Education (VCE)
  • Western Australian Certificate of Education (WACE)

Where courses have specific subject requirements, these will be expected to be studied within one of the above qualifications. Grades of ‘B’ (ACT, NTCE, SACE, VCE, WACE), ‘4’ (HSC), ‘CA’ (TCE), ‘HA’ (QCE) or higher will normally be required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Austria

For students taking the Austrian Reifeprüfung (Matura), we typically require an average score between 2.2 and 1.2 from 6 written or spoken exams. Where courses have specific subject requirements, a score of or 1 will normally be required in each.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Bahrain

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements

Belgium

The Certificat d’Enseignement Secondaire Supérieur (CESS) and Diploma van Secundair Onderwijs (DSO) are both acceptable qualifications for direct entry into first year undergraduate courses. We typically require an overall score ranging from 75% to 85%. Where the 20 point marking scale is used, we would typically require marks between 15/20 and 17/20.

Specific subject marks may be required for some courses and where this is the case, this should be studied as a 4 hour subject. Where courses require achievement in GCSE Maths, we would normally look for a score of 50% or higher in Maths within the CESS or DSO.

Students currently studying the Abschlusszeugnis der Oberstufe des Sekundarunterrichts should contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Brazil

Students taking the Brazilian High School Certificate(Certificado de Ensino Médio and Exame Nacional do Ensino Médio – ENEM) will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Brunei

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Bulgaria

For students taking the Diploma za Sredno Obrazovanie, we would typically ask for an overall score ranging from 5.3 6.0 overall with specific subject marks required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.5 or higher in Maths within the Diploma za Sredno Obrazovanie.

All students must also achieve the University’s English language requirements.

Canada

Typical offers for students from Canada are based on having completed Grade 12. The information below outlines the requirements for different states:

Alberta, Northwest Territory, Nunavut

  • Typical offers are based on an average of best 5 grade 12 courses in the General High School Diploma and offers typically range from 80% - 93%.
  • Where courses require specific subjects, these should be taken as thirty-level courses. Where A Level Maths is a course requirement, both Mathematics 30-1 and Mathematics 30-2 should be completed.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

British Columbia, Yukon Territory

  • Typical offers range from ‘BBBBBB’ – ‘AAAAAA’ from best 6 grade 12 subjects in the Senior Secondary Graduation Diploma.
  • Where courses require specific subjects these would normally need to be achieved at ‘A’ or ‘B’.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of ‘C’ or higher in grade 10 Maths.

Manitoba

  • Typical offers are based on an average of best 5 subjects at 300 level in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

New Brunswick, Prince Edward Island, Quebec, Saskatchewan

  • Typical offers are based on an average of best 5 grade 12 subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses. Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Newfoundland & Labrador

  • Typical offers are based on an average of best 5 university preparatory level subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Nova Scotia

  • Typical offers are based on an average of best 5 subjects at level 4 or 5 in the High School Completion Certificate and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Ontario

  • Typical offers are based on an average of best 6 grade 12 courses at ‘4U’, ‘4M’ or ‘DU’ in the Ontario Secondary School Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

 

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

China

Students taking the Senior Middle Examinations will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within China as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Croatia

For students taking the Croatian Matura (Svjedodžba o Maturi), we typically require an average score between 4.0 and 5.0 from best 4 subjects.

Where courses have specific subject requirements, a score of 4 or 5 will normally be required in each. For courses that require Maths as part of their A Level offer, this should be taken at extended level in the Matura.

All students must also achieve the University’s English language requirements.

Cyprus

The Apolytirion is not accepted for direct entry to the University when studied on its own. However, we are happy to consider students taking the Apolytirion alongside either 1 or 2 A Levels. For courses with typical offer requirements of ‘ABB’, we would typically require 19.5 in the Apolytirion alongside an ‘A’ at A Level or 18.0 in the Apolytirion alongside ‘AB’ at A Level. Where courses require specific subjects, these must be taken at A Level.

Where courses require achievement in GCSE Maths, we would normally look for a score of 17 or higher in Maths within the Apolytirion.

Students taking the Apolytirion without additional A Levels will need to complete a suitable Foundation Year. Loughborough University has its own Foundation Year, alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Czech Republic

For students taking the Czech Maturita (Vysvědčení o Maturitní Zkoušce), we typically require an average ranging from 2.00 to 1.00 from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All applicants must also achieve the University’s English language requirements.

Denmark

For students taking the Bevis for Studentereksamen (STX), typical offers range from 8.0 to 10.5 in the weighted average mark from the STX. Some courses may require marks (either 10 or 12) in specific Level A subjects.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Level C Maths with the STX.

Students who have taken the Studentereksamen under the old grading system would be considered on a case by case basis with an average between 9.0 and 11.0 normally required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Egypt

Students who have studied the Thanaweya A’ama (Certificate of General Secondary Education) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Estonia

For students taking the  Gümnaasiumi lõputunnistus with the Riigieksamitunnistus, we typically require a high average grade between 4.3 and 4.8 in the Gümnaasiumi lõputunnistus as well as an average percentage between 77% and 90% in the Riigieksamitunnistus.

Specific subject marks may be required for some courses. For Engineering and Science courses, we would expect students to have studied Lai Matemaatika.

Students with a score of 4.0 with 70% average from state exams would be considered on a case by case basis for the Loughborough University Foundation Year

All students must also achieve the University’s English language requirements.

European Baccalaureate

For students taking the European Baccalaureate, we typically require an overall average mark between 78% and 88% with specific subject marks (normally 8.0 or higher from a 4 or 5 period subject) required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6.5 or higher in Maths 3.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details. When applying, please state whether you are taking English as Language 1, 2, 3 or 4.

Faroe Islands

Students taking the Studentsprógv would normally be required to achieve a score between 8.0 and 10.5 with specific subject marks (either 10 or 12) required for some courses.

All students must also achieve the University’s English language requirements.

Finland

For students taking the Ylioppilastutkinto / Studentexamen, typical offer requirements would normally be based on achievement in best 4 subjects. Offers will typically be expressed as four letter grades ranging from MMMM (achieve Magna cum laude approbatur or higher in four subjects) to LEEE (achieve Eximia cum laude approbatur or higher in four subjects with at least one subject at Laudatur).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Lukion Päästötodistus

All students must also achieve the University’s English language requirements.

France

For students taking the French Baccalaureat, we typically require a range from 13.0 – 15.5 with specific subject marks required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Science (‘S’) stream. Students following the Option Internationale (OIB) will often receive a slightly lower offer.

Where courses require achievement in GCSE Maths, we would normally look for a score of 10 or higher in Maths within the Baccalaureat.

Students taking the Baccalaureat Technologique will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Germany

Students taking the Abitur typically require an overall score ranging from 1.3 - 2.0 with specific subject marks required for some courses (normally between 12and 15).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Abitur.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Ghana

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Greece

Students taking the Greek Apolyterion are normally required to also take the Panhellenic Exams. Typical offers are based on the General Access Grade in the Panhellenics and range from 16.5 to 19.0 depending on the course applied for. Where courses have specific subject requirements, these should be taken as ‘Direction’ subjects within the Panhellenics. Students applying for Science or Engineering courses would generally be expected to have followed the Sciences direction. We will also normally ask for a mark between 17.0 and 19.0 in the Apolyterion certificate.

Students who have studied 1 or 2 A Levels alongside the Apolyterion (without taking the Panhellenic Exams) would normally be required to obtain high grades in their A Level  exams along with an average mark of between 17.0 and 19.0 in the Apolyterion. Where courses have specific subject requirements, these should be taken as A Levels.

Students taking a Foundation course alongside the Apolyterion will be considered on a case by case basis.

All students must also achieve the University’s English language requirements.

Hong Kong

Typical offers for students taking the HKDSE  vary by course and range from ‘5, 4, 4’ – ‘5*, 5, 5’ from best 3 subjects, of which 2 must be electives and excluding Liberal Studies and Chinese. Where courses require specific subjects, we would be looking for grades between ‘4’ and ‘5*’ in these subjects.

For courses that require Maths as part of their A Level offer, this should be taken at extended level in the HKDSE. Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in core Maths.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Hungary

For students taking the Hungarian Matura (Érettségi Bizonyítvány), we typically require an average ranging from 70% to 83% from best 5 subjects which must include at least 2 higher level exams.

Where courses have specific subject requirements, a score of between 70% and 90% would normally be required in a higher level exam.

All students must also achieve the University’s English language requirements.

Iceland

For students taking the Stúdentspróf, we typically require an overall grade between 8.0 and 9.3 with specific subject marks (between 8 and 10) required for some courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

India

India

Typical offers are based on the Standard XII school leaving qualifications. When awarded by CBSE, ISCE or West Bengal Exam Boards, we typically ask for results in the region of 78% - 88% average performance from best 4 subjects. For other state boards, we would be looking for achievement between 83% - 93% from best 4 subjects. Specific subject marks at Standard X or Standard XII may be required for some courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Indonesia

Students who have studied the Ijazah: Sekolah Menengah Atas/Madrasah Aliyah (SMA/MA) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Ireland

Students who have taken the Leaving Certificate under the new grading system (post 2016) would normally be required to achieve 5 higher level passes with grades ranging from H2 H2 H3 H3 H3 to H1 H1 H2 H2 H2. Where courses have specific A Level subject requirements, these should be taken at higher level.

If you have taken the Leaving Certificate under the old grading system (pre 2016) our typical offers would be between B1 B1 B2 B2 B2 and A1 A1 A2 A2 A2.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Israel

For students taking the Bagrut, we would require students to have studied at least 21 study units. Typical offers will be based on average percentage from 3 best 5-unit level subjects with requirements ranging from 78% to 92% depending on the course. Please note that we do not use the Optimal Average and do not consider bonus points as part of our offers.

Where courses have specific subject requirements, we would expect these to be studied as a 5-unit subject and look for achievement between 80% and 95%.

All students must also achieve the University’s English language requirements.

Italy

For students taking the Diploma di Esamo di Stato, we typically require an overall score ranging from 85% - 98% overall. Where courses require specific subjects, we would be looking for marks between 8 and 10 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in school assessment for Maths.

Students taking the Diploma di Istituto Tecnico will be considered for first year entry on a case by case basis where subjects studied are relevant to the course for which they have applied.

All students must also achieve the University’s English language requirements.

Japan

Students taking the Kotogakko Sotsugyo Shomeisho (Upper Secondary School Leaving Certificate) will need to complete a suitable Foundation Year

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within Japan as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Jordan

Students taking the Tawjihi (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

Students must also achieve the University’s English language requirements.

Kenya

Students taking the Kenya Certificate of Secondary Education will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Kuwait

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Latvia

For students taking the Atestāts par Vispārējo Vidējo Izglītību, we typically require a high average grade between 9.2 and 10.0 as well as an average between 87% and 95% from best 4 state exams.

Where courses have specific subject requirements, a score between 87% and 95% will normally be requested in state exams in these subjects.

Students with a score of 8.0 with 80% average from best 4 state exams would be considered on a case by case basis for the Foundation Year.

All students must also achieve the University’s English language requirements.

Lebanon

Students taking the Baccalauréat Général will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Students must also achieve the University’s English language requirements.

Lithuania

For students taking the Brandos Atestatas, typical offers generally range from 9.0 – 10.0 overall. We would also typically ask for an average percentage from the best 3 state exams between 80% and 94%. Where courses require specific subjects, we would typically require these to be taken as state exams.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in school assessment for Maths.

All students must also achieve the University’s English language requirements.

Malaysia

For students taking either the Matrikulasi (Matriculation Certificate) or the Sigjil Tinggi Persekolahan Malaysian (STPM), we would typically require grades ranging from AAA-BBB from best 3 (core) subjects excluding general studies.

Where courses require achievement in GCSE Maths, we would normally look for a grade C or higher in SPM (Sijil Pelajaran Malaysia) Maths.

For students taking the Unified Examination Certificate (UEC) we would typically require from the best 7 subjects grades ranging 2xA1 5xA2 to 7xB3 in the UEC-SML. Where courses require achievement in GCSE Maths, we would normally look for a grade B6 or higher in Maths.

  • Students taking the MARA Diploma will be considered for first year entry on a case by case basis.                                                                                                                             
  • Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Malta

For students taking the Advanced Matriculation Exam, typical offers would normally be based on achievement in 2 advanced level subjects (typically between BB and AA) and 3 intermediate level subjects excluding Systems of Knowledge (typically between BCC and AAA).

Where courses have specific subject requirements, a score of B or A will normally be required in an Advanced Level subject. Where courses require achievement in GCSE Maths, we normally look for a score of 4 or higher in Maths within the Secondary Education Certificate (SEC).

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Netherlands

For students taking the Voorbereidend Wetenschappelijk Onderwijs (VWO)., typical offers range from 6.6 to 7.4 average from the VWO with specific subject marks (between and 9) required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Natuur en Techniek stream within the VWO and have taken the Maths D course.

Where courses require achievement in GCSE Maths, we would normally look for a score of 5 or higher in Maths within the VWO.

Students taking the Middelbaar Beroepsonderwijs (MBO Level 4) certificate will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for. Please contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

New Zealand

For students taking the National Certificate in Educational Achievement (NCEA) Level 3 typical offers will be based on overall achievement in the NCEA plus a required number of credits achieved at the next level up. For example, where A Level requirements are ABB, we would normally require a Merit overall with 20 Level 3 credits achieved at Excellence.

Where courses have specific subject requirements, these should be studied at Level 3 within the NCEA. Typically, an overall achievement of Merit or Excellence will be required in these subjects.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Nigeria

Students taking the WASSCE will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Norway

For students taking the Vitnemål for Videregående Opplæring, typical offers range from 4.00 to 5.25 average of all Final Assessment Grades.

Where courses have specific subject requirements, students will need to achieve a or higher in at least two 140-hour courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Oman

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Pakistan

Students taking the Intermediate/Higher Secondary School Certificate (HSSC) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Poland

For students taking the new Matura typical offers are based on average achievement from 3 extended level exams and offers normally range from 75% - 85%. Where courses require specific subjects, these should be taken as extended level exams and we would normally look for marks between 75% and 90%.

Where courses require achievement in GCSE Maths, we would normally look for a score of 68% or higher in the compulsory standard level Maths.

All students must also achieve the University’s English language requirements.

Portugal

Students taking the Diploma de Ensino Secundário would normally be required to achieve a score between 16.5 and 18.5 with specific subject marks (between 17 and 19) required for some courses.

Where courses require achievement in GCSE Maths, we normally look for a score of 14 or higher in Maths within the Diploma de Ensino Secundário.

All students must also achieve the University’s English language requirements.

Qatar

Students taking the Shahadat Al-Thanawaya Al-Aama (Senior School Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Romania

For students taking the Diploma de Bacalaureat, typical offers range from 8.6 – 9.4 overall. Where courses require a specific subject, we would be looking for this to be studied as the optional subject within the Diploma de Bacalaureat with marks between 8.6 and 9.8.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Grade 10 Maths from the ‘Foaie Matricola’ or 6.5 or higher in Maths from the Diploma de Bacalaureat.

All students must also achieve the University’s English language requirements.

Russia

Students taking the Certificate of Unified State Examination will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the for specific course requirements.

All students must also achieve the University’s English language requirements.

Saudi Arabia

Students who have studied the Tawjihiyah (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Singapore

For students with Singapore A Levels, typical offers normally range from BBC to AAA from three H2 Level subjects and offers are typically one grade lower than the typical A Level requirement as stated in the undergraduate prospectus due to the comparative difficulty.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required in line with UK A Level requirements.

Students with a Diploma from one of Singapore’s five Polytechnics would be considered for first year entry with requirements ranging from 2.50 to 3.10. Second year entry may be considered in some cases. Please contact the International Office to check if this is applicable.

For IB requirements please see the undergraduate prospectus.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Slovakia

For students taking the Slovakian Matura (Vysvedčenie o maturitnej skúške), typical offers range from 2.00 to 1.00 average from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All students must also achieve the University’s English language requirements.

Slovenia

For students taking the Maturitetno Spričevalo., we typically require an overall total score of between 22 and 30 out of 34.

Where courses have specific subject requirements, a score of or 5 will normally be required in each. Applicants for Science or Engineering courses would normally be required to take Maths at higher level and would be required to achieve a mark of between 6 and 8.

All students must also achieve the University’s English language requirements.

South Africa

For students taking the National Senior Certificate (NSC), typical offers range from 6,6,6,6,6 to 7,7,7,7,7 from the best 5 subjects, excluding Life Orientation.
 
Where courses have specific subject requirements, a score of or would normally be required.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

South Korea

Students taking the High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Spain

For students taking the Titulo de Bachillerato, we typically require an overall score of 7.50 – 9.50.

Where courses have specific subject requirements, a score of 8.00 or 9.00 will normally be required in each.  Where courses require achievement in GCSE Maths, we would normally look for a score of 5.50 – 6.50 within the Titulo de Bachillerato.

All students must also achieve the University’s English language requirements.

Sri Lanka

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Sri Lankan A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Sri Lankan A Levels, an A grade is acceptable to meet this requirement where applicable.

All students must also achieve the University’s English language requirements.

Sweden

For students tasking the Avgångsbetyg / Slutbetyg från Gymnasieskola, typical offers are normally based on an average score from 2500 credits with an ‘A’ counting as 20 points, a ‘B’ counting as 17.5 points, a ‘C’ counting as 15 points etc. Typical offers range from 16.0 to 18.8 average from 2500 credits.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required from 2 relevant subject modules within the Slutbetyg.

Students who took the Avgångsbetyg / Slutbetyg från Gymnasieskola under the old grading system are considered on a case by case basis with most courses requiring a majority of ‘VG’ and ‘MVG’ grades.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Switzerland

Students taking the following qualifications would be considered for direct entry to undergraduate courses: Certificat de MaturitéMaturitätsausweisAttestato di Maturità. Typical offer requirements are based on average achievement from best 12 subjects and offers typically range from 4.8 – 5.5. Where courses require specific subjects, we would be looking for marks between 5.0 and 6.0 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.0 or higher in school assessment for Maths.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Taiwan

Students taking the Senior High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Alternatively, Junior College Diploma holders may be considered on a case by case basis for entry to undergraduate courses.

All students must also achieve the University’s English language requirements.

Tanzania

The Advanced Certificate of Secondary Education Examination (ACSEE) is acceptable for entry into the first year of undergraduate courses. Typical offers are the same as for UK A Levels as stated in the Undergraduate Prospectus.

For courses which require achievement in GCSE Maths, we normally look for a score of C or higher in Maths in the Certificate of Secondary Education (CSE).

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Thailand

Students taking the Certificate of Secondary Education/Maw 6 will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

The Caribbean

For students taking the Caribbean Advanced Proficiency Examination (CAPE), we typically require a range from ‘2, 2, 2’ -  ‘1, 1, 1’ achieved from three 2-unit exams with specific subject marks of ‘1’ or ‘2’ required by some courses

Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in Caribbean Secondary Education Certificate (CSEC) Maths.

Requirements for American SATs and APs can be found under the country requirements for USA.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

The Gulf

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Turkey

For students taking the Anadolu Lisesi (Anatolian High School Diploma) or Fen Lisesi (Science High School Diploma), will typically require a pass mark of higher than 80%,

Students taking the Lise Bitirme Diplomasi, will be considered for first year entry on a case by case basis.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Uganda

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. The Uganda Advanced Certificate of Education (UACE) is also acceptable with grades equivalent to the typical A Level offer requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

United Arab Emirates

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

United States of America

For students studying in the American education system, typical offers for entry onto undergraduate level courses are based on obtaining between 3.2 and 3.8 in the High School Diploma along with achievement in Advanced Placement Exams (from our approved list) or SAT II Subject Specific Tests. We would typically require between ‘4, 4, 4’ and ‘5, 5, 5’ in 3 AP exams from our approved list below or between ‘650, 650, 650’ and ‘750, 700, 700’ in 3 SAT subject tests.

Approved List of AP Exams:

  • Biology
  • Calculus AB
  • Calculus BC
  • Chemistry
  • Physics (as half courses B and C)
  • English Literature and Composition
  • English Language and Composition
  • French Language
  • French Literature
  • German Language
  • Italian Language and Culture
  • Latin Literature
  • Latin: Vergil
  • Spanish Language
  • Spanish Literature
  • European History
  • United States History
  • World History

Applicants who have taken 2 AP Exams from the above list and at least 2 other AP Exams will normally be considered but are advised to contact their chosen Department in advance. We also welcome applications from students who are studying 3 IB Higher Level Certificates alongside the High School Diploma.

Where courses have an A Level maths requirement, it would be necessary for applicants to achieve a high mark in AP Calculus BC. For programmes that require achievement in GCSE Maths, we would normally look for a score of ‘570’ or higher in SAT I Math.

To satisfy English language requirements, we normally ask for a score of ‘610’ in SAT I Evidence-Based Reading/Writing although some programmes have higher requirements. 

If you have completed the High School Graduation Diploma without taking AP Exams, SAT subject tests or IB Higher Level subjects, you may be eligible for our International Foundation programme.

Vietnam

Students who have studied the Bằng Tốt Nghiệp Phổ Thông Trung Học  will need to complete an appropriate Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Zambia

Students who have studied the General Certificate of Education will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Zimbabwe

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses.

Please see the undergraduate prospectus for specific course requirements.

Zimbabwe A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Zimbabwe A Levels, an A grade is acceptable to meet this requirement where applicable.  Typical offers for students taking the Zimbabwe A levels exclude the General Paper.

All students must also achieve the University’s English language requirements.

The University uses contextual data in the admissions process to provide insights into the context in which your academic qualifications have been achieved. This may influence the typical offers listed above.

Tuition fees for 2019 entry

UK / EU fees

Full-time course per annum
£9,250
Placement year
Approx. 20% of the full-time fee

International fees

Full-time course per annum
£22,350
Placement year
Approx. 20% of the full-time fee

The fees stated above are for the 2019/20 academic year; fees for 2020/21 have not yet been confirmed by the UK government. We will update this information as soon as it is available. Fees are reviewed annually and are likely to increase to take into account inflationary pressures.

Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, IT equipment and other support services. University fees and charges can be paid in advance and there are several methods of payment, including online payments and payment by installment.

Additional costs

While the cost of your tuition covers lots of things, it doesn’t cover everything. For instance this course doesn’t cover the cost of any stationary, printing, books or re-assessments which you might need.

Sponsorships and scholarships

All of our courses have an established reputation with employers in industry. Companies, therefore, target the School with sandwich year opportunities and a number of companies offer sponsorship, for which there is intense competition. Students seeking sponsorship are urged to consult publications such as CRAC and Engineering Opportunities.

Students studying many of our Engineering degree courses, and intending to take up a career in the Armed Forces or Civil Service, may be eligible for financial support under the Defence Technical Undergraduate Scheme.

Your future career

Employed graduates in professional or managerial roles

90%

DLHE 2017

Average starting salary

£27,000

DLHE 2017

The UK has a wealth of engineering and technology companies, ranging from SMEs to multinational global corporations.

In 2015, there were over 651,000 registered engineering enterprises in the UK, employing over 5.66 million people, and turning over more than £1.24 trillion, 24% of the turnover of all enterprises in the UK. In 2015, the engineering sector contributed an estimated £486 billion (26%) to the UK GDP, produced most of the UK’s physical exports, and is expected to grow 50% by 2022.

Over 95% of the School's 2016 graduates were in full-time employment or were studying for higher degrees six months after graduation. The UK Higher Education Statistics Agency (HESA) Destinations of Leavers from Higher Education Survey (DLHE, 2016) data shows that our graduates significantly exceed the national statistics, in terms of immediate salary earning potential and employment potential. Some employers are offering starting salaries in the £30,000 to £40,000 range.

For those aspiring to achieve Chartered Engineer status and beyond with our four accrediting institutions, we actively encourage and administer student membership as the starting point. For those who progress along this professional route, median annual gross earnings for Chartered Engineers rose to £60,000 in the last national survey held in 2013. For those aspiring to lead companies, recent research shows that engineers are now represented on the boards of almost 60% of FTSE 100 companies with almost 15% of FTSE 100 executive board members with an engineering degree.

Career Support Services

Your time at Loughborough University will form a launchpad from which you can build an exciting career. With so many opportunities available, you’ll never be short of ways to improve your employability.

Our award-winning Careers Network team is here to help and support you, offering everything from CV workshops, one-to-one advice sessions and mock interview practice sessions to high-profile employer events. We’ve got everything you need for a really successful future.

Companies students have worked for after graduating

Recent graduate destinations include: BAE Systems, BMW,Barclays, British Sugar, Caterpillar, Cummins, GSK, Nestle, McLaren Automotive, Pirelli, Renishaw, Royal Navy, Rolls-Royce, Triumph and Unilever.

Our students