Chemical Engineering MEng (Hons) degree

5 years full-time with placement year or 4 years full-time

Typical offer
AAA Entry requirements
Fees for 2025-26 (per academic year)
UK: £9,250
International: £29,750
UCAS codes
5 years full-time with placement year: H802
4 years full-time: H803
Start date
October 2025
Institute code
L79

Overview

Chemical Engineering is a highly adaptable and versatile area of engineering. It applies the principles of chemistry, physics, mathematics, biology, and economics to transform energy and materials into useful and affordable products. It covers the research, design and operation of new and existing processes to minimise environmental impacts, ensure compliance with legal and ethical standards and maximise profits and benefits to society.

Research suggests an expected shortfall in skilled chemical engineers to support the UK’s green recovery and net-zero target. This means chemical engineers will be highly sought after for the specialist work required.

Chemical engineers take leading roles in many different sectors. These range from energy and water, food, healthcare and pharmaceuticals, consumer products, and even finance. They use their technical know-how and ingenuity to develop solutions to many of the world’s most pressing challenges. For example, climate change and the large-scale production of new vaccines.

We conduct world-leading research to drive the sustainable revolution in areas such as low-carbon technologies, next-generation healthcare and advanced manufacturing. Our new National Centre for the Circular Chemical Economy seeks to transform the UK chemical sector to eliminate waste and reliance on fossil technologies. Our research directly informs our teaching and project work, ensuring our students are fully equipped to meet 21st-century challenges.

Our Chemical Engineering degrees will teach you how to apply scientific and engineering principles to the design and analysis of chemical process equipment and flow sheets. Our bench and pilot-scale laboratories, VR simulation, computer classes and project work will help you to understand and apply taught principles to engineering problems, whilst also developing your key laboratory, teamwork and IT skills.

We offer a number of options for this degree. These include language options in years one and two (at different levels) in either French, German, Spanish or Mandarin, as an alternative to Materials Processing and Food Engineering. You can then choose up to three optional modules in their final year including management, environmental, IT, bioprocessing and healthcare topics. During the final design project, you will work both in teams and individually to conceptualise and design an industrial plant to address a specified design challenge. This challenge is usually aligned with your module choices and the research strengths of the department. The project brings together all aspects of the degree. This includes initial technology selection and flowsheet development, detailed design of individual unit operation, process optimisation, safety and operability analysis and finally full economic and environmental evaluation.

During the MEng degree, you will also complete a Professional Development Project (PDP). This is where you can join a research group at Loughborough, in industry or abroad, to develop new knowledge in science or engineering. The PDP is an excellent opportunity to gain first-hand insight into our ground-breaking research. You will also acquire key transferable skills, such as project planning, reporting and data analysis. Recent projects have ranged from electrochemical harvesting of CO2 for renewable chemical production to the development of microfluidic manufacturing devices and the application of artificial neural networks to predict material behaviour.

What is the difference between MEng and BEng?

The three years of the BEng degree and the first three years of the MEng degree are identical, with a good mix of theory, application and practical content from day one. The additional year of the MEng programme allows students to study a wider range of technical subjects with additional depth, as well as undertaking the Professional Development Project (PDP), which can be undertaken in industry, abroad or at Loughborough. Whilst both the MEng and BEng are accredited by the Institution of Chemical Engineers (IChemE), only the MEng degree fully meets all educational requirements for Chartered Engineer status.  

Show more

Why you should choose us

Why you should study this course

Our MEng (Hons) Chemical Engineering degree places great emphasis on developing the professional competencies and employability of our students. From the outset, our students will carry out a wide range of supported learning activities, including experimental work, group projects and computer simulations, developing their independent learning, communication skills and confidence.

Our teaching is delivered by a team of passionate academics and complemented by invited engineers to provide real-world examples. Oral and written presentations will help you to build your confidence in communicating your ideas. This is an essential requirement for a successful career in engineering.

We draw on our strong industrial network to ensure that our course remains relevant to current needs. We also provide multiple opportunities for industrial placements and overseas research projects.

Support available to you 

The day you arrive in our department, you will be assigned a member of the academic staff to be your personal tutor for the duration of your degree. Your personal tutor will support you to adapt to higher education and understand the requirements of the degree. They can advise on selecting optional modules, discuss future careers or further study, or provide academic references. They can offer additional support as and when required. For example, signposting or referring you to professional welfare support services or helping to raise and address any issues. In addition, you can book an appointment with our school’s Wellbeing Officer, who runs drop-in sessions throughout the week.

You will also benefit from our award-winning Careers Network team which not only helps in finding placements and graduate jobs but also offers a wide range of support throughout the application process to maximise the chances of success. This includes both group activities including CV workshops, careers fairs and other high-profile employer events and more targeted support through one-to-one advice sessions, mock-interview practice sessions or assessment centre preparation. We’ve got everything you need for a successful future.

Professional recognition

Our Chemical Engineering degree is accredited by The Institution of Chemical Engineers (IChemE), the globally recognised industrial body for chemical engineers in the UK. Accreditation means that our programmes are benchmarked against high, internationally recognised standards; this makes it easier to find a job (many companies require this), and puts students on a direct path to Chartership, a formal recognition of their engineering expertise.

What you'll study

Our Chemical Engineering MEng (Hons) degree is designed to provide you with a 'Chemical Engineering Toolbox' that can be applied in all industries that employ chemical engineers. The key principles of chemical engineering are covered within the first two years, to ensure that students choosing to undertake an industrial placement can make a valuable contribution to their placement company, regardless of the sector that they choose.

We ensure that sufficient grounding is achieved in core chemical engineering modules by the end of Year 2 to enable students to be productive and useful engineers if they undertake a placement year. Our MEng Chemical Engineering degree includes two major semester-long projects; a Process Design Project in Year 3 and a Professional Development Project in Year 4. These can be taken abroad or in industry and are different to a year-long industrial placement.

During the third and fourth years, you can combine your optional modules to focus on specific areas of engineering, such as:

Sustainability and low-carbon technologies

  • Circular Economy in Chemical and Biochemical Engineering, Clean Energy, Materials and Sustainability, Process Intensification

21st Century Manufacturing

  • Chemical Product Design, Process Intensification, Mixing of Fluids and Particles

Biotechnology

  • Biochemical Engineering, Downstream Processing, Healthcare Engineering

Business and Management

  • Business Systems, Entrepreneurship & Innovation, Operations Management

 

The information below is intended as an example only, featuring module details for the current year of study. Modules are reviewed on an annual basis and may be subject to future changes – revised details will be published through Programme Specifications ahead of each academic year. Please also see Terms and Conditions of Study for more information.

Semester 1 & 2

Compulsory

Chemical Engineering Laboratory

The aims of the module are:

  • To make students computer literate and introduce them to the use of the computer as a tool in chemical engineering.
  • To introduce students to experimental methods, technical report presentation and writing teamwork skills, oral presentation and EA1 (Engineering Applications 1).
  • To reinforce basic chemical engineering concepts and safety through exposure to laboratory experiments.
  • To make students aware of available resources and the need to record information and skills.

Process Balances

The aims of the module is to:

  • Impart understanding of the principles of determining steady and unsteady-state process material balances.
  • Make students aware of the importance of process costs and profitability and the need for assessment thereof.
  • Develop skills in carrying out material and heat balances and the use of equilibrium relationships to analyse chemical engineering processes.

Mathematical Methods in Chemical Engineering

The aims of this module are to reinforce and extend students' previous exposure to mathematics with an emphasis on the techniques required to solve problems arising in chemical engineering.

Semester 1

Compulsory

Fluid Mechanics I

The aim of the module is to provide students with an introduction to the role and analysis of fluids in chemical engineering. Students are given an appreciation of fluid flow: its regimes, measurement and relevance to problems in the chemical engineering domain, ranging from traditional applications (e.g., pumps) to more recent technologies (e.g., lab-on-a-chip). The students are introduced to the modified Bernoulli approach to energy accountancy, mass continuity, friction, momentum and Newton's analysis of viscosity.

Introduction to Chemical, Biochemical Processes and Sustainability

The aims of this module are:

  • To equip students with core chemistry and biochemistry knowledge related to the Chemical Engineering course.
  • To introduce students to industrially significant aspects of chemical/biochemical processes and microbiology.
  • To make students aware of engineering ethics.
  • To introduce the principles of sustainability (environmental, social, economic) to chemical/biochemical processes.

Thermodynamics I

The aims of the module are:

  • To instruct students on applying the concepts involved in the basic definitions and laws of thermodynamics to solve practical chemical engineering problems.
  • To introduce the concepts of possible and improbable processes, efficiency of processes, ideal and non-ideal (real) thermodynamical processes, scales of temperature.
  • To introduce a number of important thermodynamical cycles with identical applications.
 

Semester 2

Compulsory

Stagewise Processes

The aims of the module are:

  • To introduce the fundamental concepts of separation processes.
  • To introduce the ideas of equilibrium, an equilibrium stage and the ways of connecting stages together.

Heat Transfer

The aims of the module are:

  • To provide students with a thorough understanding of the fundamental concepts and modes of heat transfer.
  • To enable students to solve problems relating to conduction, convection, and radiation modes of heat transfer.
  • To enable students to perform calculations relating to sizing of heat exchangers or estimation of process heat duty.
  • To introduce the concepts of block diagrams, process flow diagrams, piping and instrumentation diagrams and engineering drawings.
  • To equip students with the knowledge and training of how to use a computer aided design (CAD) software.
  • To enable students to produce engineering drawings using a CAD software.
Optional

Introduction to Materials Processing

The aims of the module are to introduce:

  • Some methods of processing a range of material types from raw material to finished part
  • How the selection of a processing method can influence the properties of the material

University-Wide Language Programme

Choice of applied languages from the University-Wide Language Programme.

Semester 1 & 2

Compulsory

Process Design and Safety

The aims of this module are:

  • To familiarise students with the stages involved in progressing a process design, from early inception to a detailed plant design, with particular emphasis on inherent safety principles.
  • To convey the importance of safety in the process industry and impart a working knowledge of different hazard evaluation procedures and consequence modelling tools.

Mass Transfer and Separations

The aims of this module are:

  • To introduce the fundamental concepts of mass transfer theory and calculations
  • To give students an understanding of the principles required for the design of equilibrium-staged separation processes
  • To provide students with an understanding of the underlying principles required for mass transfer design of columns
  • To apply these techniques to the process design of packed and tray towers

Semester 1

Compulsory

Thermodynamics II

The aims of this module are to consolidate and extend the knowledge and understanding of thermodynamic equations, and in particular their application to practical systems.

Instrumentation & Control

The aims of this module are:

  • To develop an understanding of the principles of process control loops, their constituent components, and how these interact to produce a control response.
  • To develop students' personal professional skills and awareness both for procedures related to their imminent training period in industry and for their longer term career.

Fluid Mechanics II

The aims of this module are:

  • To develop students' understanding of the flow of fluids and complex fluids, through the application of the principles of conservation of energy, mass and momentum.
  • To develop expertise in the solution of fluid mechanics problems encountered in chemical engineering.
  • To acquire competences using Computational Fluid Dynamics (CFD) software for solving flow problems in complex geometries.

Semester 2

Compulsory

Reaction Engineering I

The aims of this module are to provide an introduction to chemical reaction engineering with an emphasis on reactor design and simulation. Includes introduction to reactor types, relative yield, reaction kinetics, choice of reactor type and operation.

Plant Engineering

The aims of this module are to develop knowledge and understanding of stress, strain, bending and force balances, their relation to the sizing, design and form of structures/components under load(s), the methods required to calculate stresses in example structures/components and their implementation for safe design, the selection of materials for strength and chemical plant layout.

Particle Technology

The aims of this module are:

  • To give students a critical understanding of the methods available for the production, separation, processing and characterisation of systems containing particulates such as powders, emulsions, aerosols and dispersions.
  • To introduce and/or reinforce the students knowledge of fluid mechanics relevant to systems containing a dispersed phase.

Process Systems Engineering

The aims of this module are to introduce students to the use of modern computer based techniques for the mass, overall and component, and energy balance aspects of process design using steady state process simulators.

Optional

Food Engineering

The aims of this module are:

  • To introduce students to a variety of processes used to preserve food, particularly those involving heating or cooling.
  • To introduce the microbial and biochemical aspects of the processes and show how biological materials such as foods must be treated differently to other process materials encountered by chemical engineers.
  • To use experimental data and formulae to calculate process times based on general heat and mass transfer theory applied to food systems.
  • To introduce various rheological models for the flow of foods, the impact of microstructure on rheological properties, and flow calculations in various geometries.

University-Wide Language Programme

Choice of applied languages from the University-Wide Language Programme.

Semester 1 & 2

Optional

Water Resources, Sustainability and Climate Change

The aims of this module are for the student to understand:

  • the basic principles of environmental processes and water pollution resulting from human activities;
  • the range of suitable technologies for water treatment and distribution and the range of suitable technologies for collection, treatment and disposal of liquid and solid wastes;
  • understand the physical mechanisms that lead to the transport of both chemical and biological contaminants in groundwater;
  • the various remote sensing technologies for monitoring and measuring surface water quality;
  • Geographic Information System (GIS) applications in water resources management;
  • the principles and practice of integrated water resources management;
  • the impacts of climate change on water resources and the development of adaptation strategies;
  • the measures being taken under the global sustainable development goals to ensure availability and sustainable management of water and sanitation for all.

Semester 1

Compulsory

Transfer Processes

The aims of the module are to impart in-depth knowledge and understanding in heat, mass and momentum transfer describing theories and numerical calculations in transport phenomena. The module takes an engineering approach and applies semi-empirical and theoretical results to the solution of chemical and process engineering problems.

Reaction Engineering II

The aims of the module is to instruct students in a professionally relevant, in-depth, study of reaction engineering that covers reactor behaviour and reactor design procedures.

Process Economics and Project Management

The aims of this module are:

  • To develop in-depth understanding of the techniques of capital project appraisal and planning used in the process industries.
  • To impart and extend knowledge of project management and process optimisation including critical path analysis, linear and non-linear optimisation, and process integration.
  • To instruct students on how to overcome uncertainty (in relation to decision making) and its influence upon choice between options.
  • To develop generic skills in setting the aims for a project, trials and experiments, formulating a strategy to tackle problems.

Environmental Protection and Pollution Control

The aims of the module is to instruct students on the subject of pollution control and waste disposal in the chemical and process industries by the principal biological, physico-chemical and solid/fluid separation processes. 
Optional

Technology in Business and Society

The aims of this module are:

  • to develop an appreciation of the use of Management Information Systems in business contexts, particularly in management planning, decision-making and control;
  • to develop a critical perspective on Information Systems within contemporary organisations and society;
  • to build on previous modules which introduced management aspects of Information Systems and on students' experience of working with such systems during the Industrial & Professional Studies year.

Entrepreneurship and Innovation

The aims of this module are:

  • to present a range of issues on managing entrepreneurship and innovation.
  • to present and discuss these issues for both large multinational corporations (MNCs) and small and medium-sized enterprises (SMEs).
  • to present a range of frameworks and tools in support of managing entrepreneurship and innovation.
  • to develop relevant transferable skills.

Circular Economy

The aims of the module are:
  • To introduce students to the concept of the circular economy and emerging technologies in the areas of energy, resource recovery, and the energy-water-resource nexus.
  • To introduce the whole system approach and the evaluation of sustainability.
  • To stimulate students' creativity in the application of emerging technologies to situation case studies.

Data Analysis

The objective of this module is to introduce (mainly statistical) methods for the analysis of data generated from experiments, plant trials or production. Students will gain an understanding of how confidence levels can be used to quantify uncertainty in data and shape the conclusions that can be drawn from them, to then inform decision making and resulting actions.

Biochemical Engineering

The aims of this module are:

  • To enable students to analyse biological processes based on an understanding of the principles involved
  • To develop strategies for processing biological materials based on available technologies
  • To give examples of industrially relevant processes.

Semester 2

Compulsory

Individual Process Design Project

To further develop knowledge and understanding of chemical engineering principles and practice through the detailed design study of an individual piece or small grouping of equipment.

Team Process Design Project

The aims of this module are to further develop knowledge and understanding of chemical engineering principles and practice through the detailed design study of a more traditional chemical process.

Chemical Process Control

The aims of this module are:

  • To develop the student's expertise in analysing and controlling time-varying process systems
  • To impart detailed knowledge of the quantitative features of the subject in relation to the operations encountered on process plant.
Optional

Project Management

The aims of this module are:

  • to provide students with a critical theoretical and practical understanding of key topics in managing projects.
  • to provide students with an understanding of the role of a project manager.
  • to develop a critical appreciation of business and interpersonal skills relevant to managing projects.

Healthcare Engineering

To introduce students from mechanical and manufacturing engineering backgrounds to both the opportunities and constraints of engineering practice in healthcare, medicine and medical device industry. The module will have a focus on products, design and manufacture, innovation and exploitation in a regulated industry on emerging health technology products.

Polymer Engineering - Processing and Manufacture

The aim of the module is to illustrate the principles and practice of engineering science applied to the processing and manufacture of products based on polymers.

Semester 1

Compulsory

Literature Review

The aims of this module are:
  • To develop the student's ability to search, assimilate and understand the technical literature related to a selected topic in the remit of chemical engineering.
  • To review and produce a critique of the literature identifying the gaps in research and barriers in technological developments on the selected topic area for the Professional Development Project CGD066.
Optional

Mixing of Fluids and Particles

The aims of the module are to:

  • Understand the fundamentals of single and multi-phase fluid mixing processes and particle-particle mixing
  • Gain an understanding on the design and operation of industrial mixing processes
  • Gain an understanding on the scale up of industrial mixing processes to be able to take formulated products to market
  • Acquire knowledge on the ways in which mixing affects product properties

Drug Delivery and Targeting

The aims of this module are to:

  • To develop an understanding of the principles of Drug Delivery and Targeting
  • To give practice in the selection and modelling of drug delivery devices

Process Intensification and Integration

The aims of the module are:

  • To obtain an understanding of the concept of process intensification and integration and how they can be used to improve the cost-effectiveness, energy use, environmental impact and safety of a process or unit operation
  • To apply process intensification strategies to selected process applications such as chemical reactions, heat and mass transfer, separation and dispersion processes
  • To gain knowledge and understanding of a range of intensification technologies which can be used for improving the cost-effectiveness, energy use, environmental impact and safety of processes and unit operations, such as heat transfer, mass transfer, separation and dispersion processes
  • To obtain a knowledge of a range of applications, both existing and potential, for process intensification technologies
  • To obtain knowledge and understanding of how to apply process integration techniques to improve the efficiency of a plant
  • To apply process integration tools to determine the minimum utility requirements, operating and capital costs for a chemical process and design the corresponding heat exchanger networks
 

Fundamentals of Biotechnology and Genetic Engineering

The aims of the module are:

  • To obtain a thorough understanding of the fundamental concepts of biochemistry and molecular biology and their applications in genetic engineering and biotechnology
  • To gain knowledge in a range of basic molecular biology techniques and how to apply those for gene manipulation and solving genetic engineering problems
  • To understand the application of genetic engineering tools and techniques in various fields of biotechnology, including medical, industrial, and environmental biotechnology
  • To analyse and compare a range of biotechnological processes, both existing and potential new ones, through the application of genetic engineering techniques

Semester 2

Compulsory

Advanced Process Design and Optimisation

The aims of the module are:

  • To apply principles and practices of chemical engineering and to integrate knowledge through an in-depth design study of an individual piece or small grouping of equipment.
  • To gain an in-depth understanding of the principles underlying various techniques of single objective, multiojective, dynamic and steady state optimisation.
  • To develop systematic and rigorous approach to solve advanced optimisation problems that may be encountered in process and plant design and operation.
  • To acquire a critical awareness of the difficulties and limitations associated with the mathematical optimisation and inherent design compromises.
Optional

Colloid Science and Engineering

The aims of the module are:
  • To develop a good understanding of the application of Colloid Science in a range of Chemical Engineering processes.
  • To introduce and/or reinforce the student's knowledge of molecular interactions manifestation in the colloidal domain and how colloidal phenomena are manifested in the macroscopic world.

Product Design

The aims of the module are:

  • To examine the various stages in the design of chemical, biochemical and biomedical products
  • To consider a generalised methodology for identifying needs, generating and selecting ideas, designing a manufacturing process for chemical, biochemical and biomedical products and getting the product to market.
 

Downstream Processing

The aims of the module are to develop an in-depth understanding of the theory and practice of batch and continuous downstream unit operations employed by the pharmaceutical, biopharmaceutical and biochemical industries.

Advanced Biochemical Engineering

The aims of the module are to give students an in depth knowledge of the engineering and biological principles of the industrial production of a range of bioactive molecules by fermentation and cell culture.

Clean Energy, Materials and Sustainability

The aims of the module are:

  • To enable students to gain an in-depth knowledge of the science and engineering principles of clean chemical energy conversions, primarily the electro-chemical energy storage and conversion, including batteries, capacitor, hydrogen and fuel cell technologies, bioenergy utilisation and carbon dioxide utilisation.
  • To enable students to understand the application of battery, fuel cell and hybrid systems as an enabling clean energy technology for a wide range of applications including transportation, stationary and portable power applications.
  • To enable students to gain insight into the sustainability of processes, particularly life-cycle assessment and safety.

Technological Entrepreneurship

The module aims to provide students with advanced knowledge and understanding of a broad set of concepts associated with innovation, intellectual property and commercialisation aspects focusing on the biotechnology and biomedical engineering fields. 

Semester 1 & 2

Compulsory

Professional Development Project

The aims of this module are:

  • To develop the ability to conduct an open-ended research project
  • To enable the exercise of initiative and creativity in the execution of a project
  • To develop the ability to work individually
  • To provide opportunities for reporting of findings
  • To identify and describe newly acquired skills and professionalism

Opportunity to learn new languages

You can give your degree an international edge by taking credit-bearing language modules as part of your course.

The University Language Centre provides a range of modules in French, German, Spanish and Mandarin Chinese from beginners' level upwards. You may take these language modules as part of your degree, enter the programme at your level of competence and work upwards one semester at a time.

Through your language modules you will practise a range of transferable skills, from face-to-face communication and presentation skills, to producing multi-media materials, you will develop skills in your chosen language in small, interactive classes, and will gain greater cultural competence as you move up the levels.

Options for languages study

How you'll study

  • Lectures
  • Tutorials
  • Independent study
  • Group work
  • Supervision
  • Workshops
  • Laboratory work
  • Practical sessions

How you'll be assessed

Our course offers good balance between knowledge and application-based assessments.

Overall, around 50% of assessments are exam-based, but the proportion reduces slightly from the first to final year. The other half of our assessments are in the form of coursework, both individually and in groups, such as reports, oral presentations, posters or software files. These are excellent opportunities to develop essential communication and teamwork skills and receive detailed verbal or written feedback.

Placement year

This course includes the option to complete a paid year working in industry. Our close links with industrial partners enable us to provide our students with considerable help in sourcing and securing their placement.

Placements are an excellent opportunity to gain real-world experience and apply the knowledge from your degree in practice. Many of our students return with a much better understanding of the wider context of the modules they have studied and generally perform better in their final year(s) of study.

In addition, the placement year will allow students to ‘test drive’ an industrial sector. It will give students insight into what they can expect from a graduate position before having to commit to a longer-term career. Placements are a great stepping-stone into a permanent job. We see many of our students return to their placement employer as a graduate because they have demonstrated their worth to the organisation.

Please note that whilst the Department offers great support for students to find a placement, it is ultimately the student's responsibility to source and secure their industrial placement.

Additional award

By undertaking a year on professional placement or working in industry, you will gain an additional award alongside your final qualification. If you undertake a professional placement year you will gain a Diploma in Professional Studies (DPS) or if you complete a year in industry you will gain a Diploma in Industrial Studies (DIS).

Placement year destinations

Students join placement companies of a variety of sizes and sectors. Some include pharmaceuticals, food and drink, energy and general engineering companies. Recent placement host companies include Apple, Centrica, ExxonMobil, GlaxoSmithKline, Jacobs Douwe Egberts, PepsiCo, Pfizer, Procter and Gamble, and Unilever.

Student placement - a unique opportunity

More than 1,400 Loughborough University students complete a 12-month placement each year. They join a range of organisations and deliver tangible benefits to their hosts as well as honing a range of workplace skills.

Study abroad

If you are interested in travelling whilst you study, there are options to study overseas with our partner universities. By choosing this course you'll have the option to take advantage of this exciting opportunity, giving you the chance to not only experience new cultures and visit exciting destinations, but also to expand your learning experience. The length of a study abroad placement would be confirmed by your School or Department.

Additional award

This course comes with the option to study abroad for a year, at the end of which you will gain a Diploma in International Studies (DIntS). This is an additional award to the final qualification you will receive once you have successfully completed this course.

Alternatively, MEng students can also take part competitively in the UNITECH scheme. Upon successful completion, you will gain an additional award to the final qualification - a Diploma in International Studies (DIntS).

Where you'll study

We have recently invested £25 million into the facilities in our S-Building, home to our Chemical Engineering Department. This offers students state-of-the-art facilities with the chance to experience real-life industrial processes.

We have world-class laboratories which allow you to gain practical and hands-on experience with industry-scale equipment. We have over 50 experimental rigs in our labs that offer an enhanced learning experience. They allow you to develop key practical skills. We are also proud of our interactive virtual reality facility called the Igloo. This uses unique simulation software to allow you to explore, as a team, the operation of real-life industrial processes within a safe and accessible environment.

For taught sessions, we also have an 87-seat IT laboratory. This is loaded with all the required software needed for your course. It can also be used for private study and project work.

In addition to this, STEMLab is a state-of-the-art laboratory facility that opened in 2017. It forms part of a wider £25M investment in the West Park of our campus, the home of our Engineering Schools, which includes an adjacent student learning and teaching hub. STEMLab offers new ways to learn and collaborate. It has drop-in engineering workshops, teaching laboratories, workshops, computer-aided design and rapid prototyping facilities, a design studio and informal learning spaces. These enhanced facilities further increase our ability to train and develop skilled graduates who are targeted by major employers from across the world.

Entry requirements

To learn more about the qualifications we typically accept, please select your country from the drop-down menu below.

General entry requirements

The entry requirements for each course should be read alongside the University’s general entry requirements which give further details on acceptable subjects, alternative UK and international qualifications and minimum English language requirements.

General entry requirements

Contextual admissions

The University’s admissions process uses contextual information to provide insights into the context in which your academic qualifications have been achieved. This may influence the typical offers listed below.

Contextual admissions

United Kingdom

Typical A level offer

AAA including Maths and at least one from Chemistry or Physics

Typical IB offer

37 (6,6,6 HL) including Maths and at least one from Chemistry or Physics at HL

Typical BTEC offer

BTEC Level 3 National Diploma in a relevant subject: DD plus A Level Maths at grade A  

BTEC National Extended Certificate in Applied Science or Engineering: D plus A levels AA to include Maths and either Chemistry or Physics.

BTEC National Diploma in Applied Science or Engineering: DD plus A levels AA to include Maths and either Chemistry or Physics

BTEC National Extended Diploma in Applied Science or Engineering: DDD plus A level Maths at Grade A

GCSE

GCSE English Language grade 4/C

Reduced contextual offer

Meeting specific eligibility criteria guarantees that if you are made an offer, it will be reduced by up to two grades. Find out more about Access Loughborough Contextual Offers.

Preferred subjects

BTEC: Applied Science, Engineering

Selection

Applicants are usually selected based on their UCAS application, but in exceptional cases, an interview may be required. If applicants are made an offer of a place, they will be invited to visit the department giving them the opportunity to meet staff and students, see facilities and get an insight into what it is like to be a student at Loughborough.

Many of our courses receive a large number of applications for each available place.  We cannot unfortunately always make offers to all applicants who are predicted to achieve/have achieved grades in line with our advertised typical offers.

Australia

Typical offers for students from Australia are based on the Australian Tertiary Admissions Rank (ATAR). Typically, we would require a score between 85.00 and 94.00. For students from Queensland, requirements from the Overall Position (OP) would typically be between 8 and 4.

Further to the above, students would normally be required to pass one of the following qualifications:

  • ACT Year 12 Certificate
  • New South Wales Higher School Certificate (HSC)
  • Northern Territory Certificate of Education (NTCE)
  • Queensland Certificate of Education (QCE)
  • South Australian Certificate of Education (SACE)
  • Tasmanian Certificate of Education (TCE)
  • Victorian Certificate of Education (VCE)
  • Western Australian Certificate of Education (WACE)

Where courses have specific subject requirements, these will be expected to be studied within one of the above qualifications. Grades of ‘B’ (ACT, NTCE, SACE, VCE, WACE), ‘4’ (HSC), ‘CA’ (TCE), ‘HA’ (QCE) or higher will normally be required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Austria

For students taking the Austrian Reifeprüfung (Matura), we typically require an average score between 2.2 and 1.2 from 6 written or spoken exams. Where courses have specific subject requirements, a score of or 1 will normally be required in each.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Bahrain

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements

Bangladesh

Students taking the Higher Secondary Certificate (HSC) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Belgium

The Certificat d’Enseignement Secondaire Supérieur (CESS) and Diploma van Secundair Onderwijs (DSO) are both acceptable qualifications for direct entry into first year undergraduate courses. We typically require an overall score ranging from 75% to 85%. Where the 20 point marking scale is used, we would typically require marks between 15/20 and 17/20.

Specific subject marks may be required for some courses and where this is the case, this should be studied as a 4-hour subject. Where courses require achievement in GCSE Maths, we would normally look for a score of 50% or higher in Maths within the CESS or DSO.

Students currently studying the Abschlusszeugnis der Oberstufe des Sekundarunterrichts should contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Brazil

Students taking the Brazilian High School Certificate(Certificado de Ensino Médio and Exame Nacional do Ensino Médio – ENEM) will need to complete a suitable Foundation Year. 

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement Team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Brunei

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Bulgaria

For students taking the Diploma za Sredno Obrazovanie, we would typically ask for an overall score ranging from 5.3 6.0 overall with specific subject marks required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.5 or higher in Maths within the Diploma za Sredno Obrazovanie.

All students must also achieve the University’s English language requirements.

Canada

Typical offers for students from Canada are based on having completed Grade 12. The information below outlines the requirements for different states:

Alberta, Northwest Territory, Nunavut

  • Typical offers are based on an average of best 5 grade 12 courses in the General High School Diploma and offers typically range from 80% - 93%.
  • Where courses require specific subjects, these should be taken as thirty-level courses. Where A Level Maths is a course requirement, both Mathematics 30-1 and Mathematics 30-2 should be completed.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

British Columbia, Yukon Territory

  • Typical offers range from ‘BBBBBB’ – ‘AAAAAA’ from best 6 grade 12 subjects in the Senior Secondary Graduation Diploma.
  • Where courses require specific subjects these would normally need to be achieved at ‘A’ or ‘B’.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of ‘C’ or higher in grade 10 Maths.

Manitoba

  • Typical offers are based on an average of best 5 subjects at 300 level in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

New Brunswick, Prince Edward Island, Quebec, Saskatchewan

  • Typical offers are based on an average of best 5 grade 12 subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses. Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Newfoundland & Labrador

  • Typical offers are based on an average of best 5 university preparatory level subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Nova Scotia

  • Typical offers are based on an average of best 5 subjects at level 4 or 5 in the High School Completion Certificate and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Ontario

  • Typical offers are based on an average of best 6 grade 12 courses at ‘4U’, ‘4M’ or ‘DU’ in the Ontario Secondary School Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Quebec

  • Typical offers range from 80% - 93% overall in the Diplome d'Etudes Collegiales with specific subject marks of 80% - 96% required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 11 Maths. 

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

China

Students taking the Senior Middle Examinations will need to complete a suitable Foundation Year. 

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

We will also accept a first year of study at a recognised university of appropriate standing within China as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the Global Engagement team who can advise on acceptability for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Croatia

For students taking the Croatian Matura (Svjedodžba o Maturi), we typically require an average score between 4.0 and 5.0.

Where courses have specific subject requirements, a score of 4 or 5 will normally be required in each. For courses that require Maths as part of their A Level offer, this should be taken at extended level in the Matura.

All students must also achieve the University’s English language requirements.

Cyprus

The Apolytirion is not accepted for direct entry to the University when studied on its own. However, we are happy to consider students taking the Apolytirion alongside either 1 or 2 A Levels. For courses with typical offer requirements of ‘ABB’, we would typically require 19.5 in the Apolytirion alongside an ‘A’ at A Level or 18.0 in the Apolytirion alongside ‘AB’ at A Level. Where courses require specific subjects, these must be taken at A Level.

Where courses require achievement in GCSE Maths, we would normally look for a score of 17 or higher in Maths within the Apolytirion.

Students taking the Apolytirion without additional A Levels will need to complete a suitable Foundation Year. Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Czech Republic

For students taking the Czech Maturita (Vysvědčení o Maturitní Zkoušce), we typically require an average ranging from 2.00 to 1.00 from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All applicants must also achieve the University’s English language requirements.

Denmark

For students taking the Bevis for Studentereksamen (STX), typical offers range from 8.0 to 10.5 in the weighted average mark from the STX. Some courses may require marks (either 10 or 12) in specific Level A subjects.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Level C Maths with the STX.

Students who have taken the Studentereksamen under the old grading system would be considered on a case by case basis with an average between 9.0 and 11.0 normally required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Egypt

Students who have studied the Thanaweya A’ama (Certificate of General Secondary Education) will need complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Estonia

For students taking the  Gümnaasiumi lõputunnistus with the Riigieksamitunnistus, we typically require a high average grade between 4.3 and 4.8 in the Gümnaasiumi lõputunnistus as well as an average percentage between 77% and 90% in the Riigieksamitunnistus.

Specific subject marks may be required for some courses. For Engineering and Science courses, we would expect students to have studied Lai Matemaatika.

Students with a score of 4.0 with 70% average from state exams would be considered on a case by case basis for the Loughborough University Foundation Year

All students must also achieve the University’s English language requirements.

European Baccalaureate

For students taking the European Baccalaureate, we typically require an overall average mark between 78% and 88% with specific subject marks (normally 8.0 or higher from a 4 or 5 period subject) required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6.5 or higher in Maths 3.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details. When applying, please state whether you are taking English as Language 1, 2, 3 or 4.

Faroe Islands

Students taking the Studentsprógv would normally be required to achieve a score between 8.0 and 10.5 with specific subject marks (either 10 or 12) required for some courses.

All students must also achieve the University’s English language requirements.

Finland

For students taking the Ylioppilastutkinto / Studentexamen, typical offer requirements would normally be based on achievement in best 4 subjects. Offers will typically be expressed as four letter grades ranging from MMMM (achieve Magna cum laude approbatur or higher in four subjects) to LEEE (achieve Eximia cum laude approbatur or higher in four subjects with at least one subject at Laudatur).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Lukion Päästötodistus

All students must also achieve the University’s English language requirements.

France

For students taking the new French Baccalauréat Général (assessed from 2021 onwards), we typically require an overall result between 13.0 – 15.5 with results of 14-15 in two speciality subjects. Specific speciality subjects are required for some courses.

Students following the Option Internationale (OIB) will often receive a slightly lower offer.

Where courses require achievement in GCSE Maths, we would normally look for a score of 10 or higher in Mathematics taken in Year 12 as a Speciality Subject (Première) or a score of 11 or higher in Additional Maths taken as an Option in Year 13 (Terminale).

Students taking the Baccalauréat Technologique will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Germany

Students taking the Abitur typically require an overall score ranging from 1.3 - 2.0 with specific subject marks required for some courses (normally between 12and 15).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Abitur.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Ghana

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Greece

Students taking the Greek Apolyterion are normally required to also take the Panhellenic Exams. Typical offers are based on the General Access Grade in the Panhellenics and range from 16.5 to 19.0 depending on the course applied for. Where courses have specific subject requirements, these should be taken as ‘Direction’ subjects within the Panhellenics. Students applying for Science or Engineering courses would generally be expected to have followed the Sciences direction. We will also normally ask for a mark between 17.0 and 19.0 in the Apolyterion certificate.

Students who have studied 1 or 2 A Levels alongside the Apolyterion (without taking the Panhellenic Exams) would normally be required to obtain high grades in their A Level  exams along with an average mark of between 17.0 and 19.0 in the Apolyterion. Where courses have specific subject requirements, these should be taken as A Levels.

Students taking a Foundation course alongside the Apolyterion will be considered on a case by case basis.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Hong Kong

Typical offers for students taking the HKDSE  vary by course and range from ‘5, 4, 4’ – ‘5*, 5, 5’ from best 3 subjects, of which 2 must be electives and excluding Liberal Studies and Chinese. Where courses require specific subjects, we would be looking for grades between ‘4’ and ‘5*’ in these subjects.

For courses that require Maths as part of their A Level offer, this should be taken at extended level in the HKDSE. Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in core Maths.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Hungary

For students taking the Hungarian Matura (Érettségi Bizonyítvány), we typically require an average ranging from 70% to 83% from best 5 subjects which must include at least 2 higher level exams.

Where courses have specific subject requirements, a score of between 70% and 90% would normally be required in a higher level exam.

All students must also achieve the University’s English language requirements.

Iceland

For students taking the Stúdentspróf, we typically require an overall grade between 8.0 and 9.3 with specific subject marks (between 8 and 10) required for some courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

India

Typical offers are based on the Standard XII school leaving qualifications. When awarded by CBSE, ISCE or West Bengal Exam Boards, we typically ask for results in the region of 78% - 88% average performance from best 4 subjects. For other state boards, we would be looking for achievement between 83% - 93% from best 4 subjects. Specific subject marks at Standard X or Standard XII may be required for some courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Indonesia

Students who have studied the Ijazah: Sekolah Menengah Atas/Madrasah Aliyah (SMA/MA) will need complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Ireland

Students who have taken the Leaving Certificate under the new grading system (post 2016) would normally be required to achieve 5 higher level passes with grades ranging from H2 H2 H3 H3 H3 to H1 H1 H2 H2 H2. Where courses have specific A Level subject requirements, these should be taken at higher level.

If you have taken the Leaving Certificate under the old grading system (pre-2016) our typical offers would be between B1 B1 B2 B2 B2 and A1 A1 A2 A2 A2.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Israel

For students taking the Bagrut, we would require students to have studied at least 21 study units. Typical offers will be based on average percentage from 3 best 5-unit level subjects with requirements ranging from 78% to 92% depending on the course. Please note that we do not use the Optimal Average and do not consider bonus points as part of our offers.

Where courses have specific subject requirements, we would expect these to be studied as a 5-unit subject and look for achievement between 80% and 95%.

All students must also achieve the University’s English language requirements.

Italy

For students taking the Diploma di Esamo di Stato, we typically require an overall score ranging from 85% - 98% overall. Where courses require specific subjects, we would be looking for marks between 8 and 10 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in school assessment for Maths.

Students taking the Diploma di Istituto Tecnico will be considered for first year entry on a case by case basis where subjects studied are relevant to the course for which they have applied.

All students must also achieve the University’s English language requirements.

Japan

Students taking the Kotogakko Sotsugyo Shomeisho (Upper Secondary School Leaving Certificate) will need to complete a suitable Foundation Year

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

We will also accept a first year of study at a recognised university of appropriate standing within Japan as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the Global Engagement team who can advise on acceptability for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Jordan

Students taking the Tawjihi (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

Students must also achieve the University’s English language requirements.

Kazakhstan

Typical offers for students from Kazakhstan are based on the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate. Typically, we would require a score between AAA and BBB from Advanced level subjects.  Where courses  have specific subject requirements, these will be expected to be studied at Advanced level.

English language studied within the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate is not sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Kenya

Students taking the Kenya Certificate of Secondary Education will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Kuwait

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Latvia

For students taking the Atestāts par Vispārējo Vidējo Izglītību, we typically require a high average grade between 9.2 and 10.0 as well as an average between 87% and 95% from best 4 state exams.

Where courses have specific subject requirements, a score between 87% and 95% will normally be requested in state exams in these subjects.

Students with a score of 8.0 with 80% average from best 4 state exams would be considered on a case by case basis for the Foundation Year.

All students must also achieve the University’s English language requirements.

Lebanon

Students taking the Baccalauréat Général will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Students must also achieve the University’s English language requirements.

Lithuania

For students taking the Brandos Atestatas, typical offers generally range from 9.0 – 10.0 overall. We would also typically ask for an average percentage from the best 3 state exams between 80% and 94%. Where courses require specific subjects, we would typically require these to be taken as state exams.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in school assessment for Maths.

All students must also achieve the University’s English language requirements.

Malaysia

For students taking either the Matrikulasi (Matriculation Certificate) or the Sigjil Tinggi Persekolahan Malaysian (STPM), we would typically require grades ranging from AAA-BBB from best 3 (core) subjects excluding general studies.

Where courses require achievement in GCSE Maths, we would normally look for a grade C or higher in SPM (Sijil Pelajaran Malaysia) Maths.

For students taking the Unified Examination Certificate (UEC) we would typically require from the best 7 subjects grades ranging 2xA1 5xA2 to 7xB3 in the UEC-SML. Where courses require achievement in GCSE Maths, we would normally look for a grade B6 or higher in Maths.

  • Students taking the MARA Diploma will be considered for first year entry on a case by case basis.                                                                                                                             
  • Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Malta

For students taking the Advanced Matriculation Exam, typical offers would normally be based on achievement in 2 advanced level subjects (typically between BB and AA) and 3 intermediate level subjects excluding Systems of Knowledge (typically between BCC and AAA).

Where courses have specific subject requirements, a score of B or A will normally be required in an Advanced Level subject. Where courses require achievement in GCSE Maths, we normally look for a score of 4 or higher in Maths within the Secondary Education Certificate (SEC).

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Netherlands

For students taking the Voorbereidend Wetenschappelijk Onderwijs (VWO)., typical offers range from 6.6 to 7.4 average from the VWO with specific subject marks (between and 9) required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Natuur en Techniek stream within the VWO and have taken the Maths D course.

Where courses require achievement in GCSE Maths, we would normally look for a score of 5 or higher in Maths within the VWO.

Students taking the Middelbaar Beroepsonderwijs (MBO Level 4) certificate will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for. Please contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

New Zealand

For students taking the National Certificate in Educational Achievement (NCEA) Level 3 typical offers will be based on overall achievement in the NCEA plus a required number of credits achieved at the next level up. For example, where A Level requirements are ABB, we would normally require a Merit overall with 20 Level 3 credits achieved at Excellence.

Where courses have specific subject requirements, these should be studied at Level 3 within the NCEA. Typically, an overall achievement of Merit or Excellence will be required in these subjects.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Nigeria

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Norway

For students taking the Vitnemål for Videregående Opplæring, typical offers range from 4.00 to 5.25 average of all Final Assessment Grades.

Where courses have specific subject requirements, students will need to achieve a or higher in at least two 140-hour courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Oman

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Pakistan

Students taking the Intermediate/Higher Secondary School Certificate (HSSC) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Poland

For students taking the new Matura typical offers are based on average achievement from 3 extended level exams and offers normally range from 75% - 85%. Where courses require specific subjects, these should be taken as extended level exams and we would normally look for marks between 75% and 90%.

Where courses require achievement in GCSE Maths, we would normally look for a score of 68% or higher in the compulsory standard level Maths.

All students must also achieve the University’s English language requirements.

Portugal

Students taking the Diploma de Ensino Secundário would normally be required to achieve a score between 16 and 18 with specific subject marks (between 17 and 19) required for some courses.

Where courses require achievement in GCSE Maths, we normally look for a score of 14 or higher in Maths within the Diploma de Ensino Secundário.

All students must also achieve the University’s English language requirements.

Qatar

Students taking the Shahadat Al-Thanawaya Al-Aama (Senior School Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Romania

For students taking the Diploma de Bacalaureat, typical offers range from 8.6 – 9.4 overall. Where courses require a specific subject, we would be looking for this to be studied as the optional subject within the Diploma de Bacalaureat with marks between 8.6 and 9.8.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Grade 10 Maths from the ‘Foaie Matricola’ or 6.5 or higher in Maths from the Diploma de Bacalaureat.

All students must also achieve the University’s English language requirements.

Russia

Students taking the Certificate of Unified State Examination will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Saudi Arabia

Students who have studied the Tawjihiyah (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Singapore

For students with Singapore A Levels, typical offers normally range from BBC to AAA from three H2 Level subjects and offers are typically one grade lower than the typical A Level requirement as stated in the undergraduate prospectus due to the comparative difficulty.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required in line with UK A Level requirements.

Students with a Diploma from one of Singapore’s five Polytechnics would be considered for first year entry with requirements ranging from 2.50 to 3.10. Second year entry may be considered in some cases. Please contact the Global Engagement team to check if this is applicable.

For IB requirements please see the undergraduate prospectus.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Slovakia

For students taking the Slovakian Matura (Vysvedčenie o maturitnej skúške), typical offers range from 2.00 to 1.00 average from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All students must also achieve the University’s English language requirements.

Slovenia

For students taking the Maturitetno Spričevalo., we typically require an overall total score of between 22 and 30 out of 34.

Where courses have specific subject requirements, a score of or 5 will normally be required in each. Applicants for Science or Engineering courses would normally be required to take Maths at higher level and would be required to achieve a mark of between 6 and 8.

All students must also achieve the University’s English language requirements.

South Africa

For students taking the National Senior Certificate (NSC), typical offers range from 6,6,6,6,6 to 7,7,7,7,7 from the best 5 subjects, excluding Life Orientation.
 
Where courses have specific subject requirements, a score of or would normally be required.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

South Korea

Students taking the High School Diploma will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Spain

For students taking the Titulo de Bachillerato, we typically require an overall score of 7.50 – 9.50.

Where courses have specific subject requirements, a score of 8.00 or 9.00 will normally be required in each.  Where courses require achievement in GCSE Maths, we would normally look for a score of 5.50 – 6.50 within the Titulo de Bachillerato.

All students must also achieve the University’s English language requirements.

Sri Lanka

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Sri Lankan A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Sri Lankan A Levels, an A grade is acceptable to meet this requirement where applicable.

All students must also achieve the University’s English language requirements.

Sweden

For students tasking the Avgångsbetyg / Slutbetyg från Gymnasieskola, typical offers are normally based on an average score from 2500 credits with an ‘A’ counting as 20 points, a ‘B’ counting as 17.5 points, a ‘C’ counting as 15 points etc. Typical offers range from 16.0 to 18.8 average from 2500 credits.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required from 2 relevant subject modules within the Slutbetyg.

Students who took the Avgångsbetyg / Slutbetyg från Gymnasieskola under the old grading system are considered on a case by case basis with most courses requiring a majority of ‘VG’ and ‘MVG’ grades.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Switzerland

Students taking the following qualifications would be considered for direct entry to undergraduate courses: Certificat de MaturitéMaturitätsausweisAttestato di Maturità. Typical offer requirements are based on average achievement from best 12 subjects and offers typically range from 4.8 – 5.5. Where courses require specific subjects, we would be looking for marks between 5.0 and 6.0 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.0 or higher in school assessment for Maths.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Taiwan

Students taking the Senior High School Diploma will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Alternatively, Junior College Diploma holders may be considered on a case by case basis for entry to undergraduate courses.

All students must also achieve the University’s English language requirements.

Tanzania

The Advanced Certificate of Secondary Education Examination (ACSEE) is acceptable for entry into the first year of undergraduate courses. Typical offers are the same as for UK A Levels as stated in the Undergraduate Prospectus.

For courses which require achievement in GCSE Maths, we normally look for a score of C or higher in Maths in the Certificate of Secondary Education (CSE).

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Thailand

Students taking the Certificate of Secondary Education/Maw 6 will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

The Caribbean

For students taking the Caribbean Advanced Proficiency Examination (CAPE), we typically require a range from ‘2, 2, 2’ -  ‘1, 1, 1’ achieved from three 2-unit exams with specific subject marks of ‘1’ or ‘2’ required by some courses

Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in Caribbean Secondary Education Certificate (CSEC) Maths.

Requirements for American SATs and APs can be found under the country requirements for the USA.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

The Gulf

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Turkey

For students taking the Anadolu Lisesi (Anatolian High School Diploma) or Fen Lisesi (Science High School Diploma), will typically require a pass mark of higher than 80%,

Students taking the Lise Bitirme Diplomasi, will be considered for first year entry on a case by case basis.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

Uganda

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. The Uganda Advanced Certificate of Education (UACE) is also acceptable with grades equivalent to the typical A Level offer requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Ukraine

Students taking the Atestat pro Povnu Zagal'nu Sersdniu Osvitu/Certificate of Complete General Secondary Education will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

We will also accept a first year of study at a recognised university of appropriate standing within Ukraine as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average with specific subject marks required for some courses. Please contact the Global Engagement team who can advise on acceptability for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

United Arab Emirates

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for the USA.

All students must also achieve the University’s English language requirements.

United States of America

For students studying in the USA, typical offers for entry onto undergraduate level courses are based on obtaining 3.2/4.0 GPA in the High School Graduation Diploma, in addition to a combination of any three of the following:

  • Advanced Placement (AP) Exam
  • IB Higher Levels
  • College level class credit (should normally be taken in Grade 12 for one semester, and be equivalent to 3 credits/units in an academic subject)
  • Honors classes (should be taken for a full academic year in either Grade 11 or Grade 12)

Where courses have a specific A Level subject requirement this must be achieved in the relevant AP exam or IB Higher Level. Where AP is used to meet an A Level Maths subject requirement AP Calculus BC would be required.

 

A level Grade AP Exam Honors or College Class
A* 5 A+
A 5 A / A-
B 4 B+ / B
C 3 B-

For programmes that require achievement in GCSE Maths, we would normally look for a score of ‘570’ or higher in SAT I Math or ACT with a minimum score of 27 overall and 26 in each component.

To satisfy English language requirements we consider a range of qualifications. Please see the Approved Qualifications table on the English Language page for further details

Vietnam

Students who have studied the Bằng Tốt Nghiệp Phổ Thông Trung Học  will need to complete an appropriate Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Zambia

Students who have studied the General Certificate of Education will need to complete a suitable Foundation Year.

Loughborough University offers a Foundation Year through ONCAMPUS. You can view the entry requirements for this on the ONCAMPUS webpage. Alternatively, please contact our Global Engagement team to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Zimbabwe

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses.

Please see the undergraduate prospectus for specific course requirements.

Zimbabwe A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Zimbabwe A Levels, an A grade is acceptable to meet this requirement where applicable.  Typical offers for students taking the Zimbabwe A levels exclude the General Paper.

All students must also achieve the University’s English language requirements.

Tuition fees for 2025 entry

UK fees

Full-time course per annum
£9,250
Placement year
Approx. 20% of the full-time fee

International fees

Full-time course per annum
£29,750
Placement year
Approx. 20% of the full-time fee

Fees are reviewed annually and are likely to increase to take into account inflationary pressures.

Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, IT equipment and other support services. University fees and charges can be paid in advance and there are several methods of payment, including online payments and payment by instalment.

Additional costs

While the cost of your tuition covers lots of things, it doesn’t cover everything. For instance this course doesn’t cover the cost of any stationery, printing, books or re-assessments which you might need.

Your future career

Average Starting Salary

£35,000

Graduate Outcomes Survey, 2021-22 graduates

A degree in Chemical Engineering from Loughborough University will give you the chemical engineering knowledge that is necessary to meet the needs of industry. You will also gain a diverse skill set. This includes project management, teamwork, leadership, business acumen and people management. As well as technical expertise, we will set you up for a successful career.

Our graduates have gone on to pursue a diverse array of exciting and rewarding careers with a wide range of employers. Others have gone on to pursue their research interests by undertaking a PhD.

Most of our graduates are employed by companies covering different processing sectors, such as energy and water, food and drink, pharmaceuticals, plastics and consumer products. We have an excellent reputation with industry and many of these companies favour Loughborough as a source of chemical engineers. However, some of our graduates choose to take up careers in areas such as finance and business, using their strong transferable skills developed during their degree.

Careers Fair

We hold our own Engineering Careers Fair. In recent years, over 80 companies have attended our fair to employ our students. This includes major consulting and contracting companies in the UK, as well as more local and specialist firms. Other major employers who employ Chemical Engineers, as well as other graduates, also attend the University-wide careers fair.

Career support services

Your time at Loughborough University will form a launchpad from which you can build an exciting career. With so many opportunities available, you’ll never be short of ways to improve your employability.

Our award-winning Careers Network team is here to help and support you, offering everything from CV workshops, one-to-one advice sessions and mock interview practice sessions to high-profile employer events. We’ve got everything you need for a really successful future.

Companies students have worked for after graduating

PWC, BAE, Exxon Mobile, Atomic Weapons Establishment (AWE), Babcock, DNV, KPMG, Kubrick, Lloyds, OLG Consulting, Reckitt, Thames Water, Toyota, Wood Plc, 3M, Astra Zeneca, British Sugar, Ford, GSK, Jaguar Land Rover, Johnson Mathey, Perenco, Proctor & Gamble, Sellafield, Shell Trading & Drilling.

Compare our course stats at Discover Uni