Biomaterials Engineering BEng (Hons) DIS/DPS/DIntS degree BEng (Hons) degree

4 years full-time with placement year

Typical offer
ABB
UCAS code
J5BZ
Institute code
L79
Start date
28 September 2020
UK / EU fee
£9,250
International fee
£22,350
Subject area
Bioengineering
Typical offer
ABB
UCAS code
​J5BY
Institute code
L79
Start date
28 September 2020
UK / EU fee
£9,250
International fee
£22,350
Subject area
Bioengineering

The fees stated above are for the 2019/20 academic year; fees for 2020/21 have not yet been confirmed by the UK government. We will update this information as soon as it is available.

Overview

Biomaterials Engineering (BEng) is an exciting course delivered within the family of materials courses here at Loughborough and builds on our strengths in Materials and Bio-related disciplines across the University.

The Biomaterials Engineering course offers students with a leaning towards bioscience and biotechnology a route into the important and growing area of materials that are bio-compatible and/or bio-derived and those that are designed for use in the biomedical sector. Particular application areas are in the health, sport and lifestyle sectors, in regenerative medicine, and in the context of a world-wide ageing population, biomaterials and medical device technology are developing fields that are set to continue to grow for many years.

By its nature this course is very interdisciplinary and also benefits from the expertise of our School of Sports, Exercise and Health Sciences and Chemical Engineering department (Regenerative Medicine).

Our BEng (Hons) Biomaterials Engineering degree is a comprehensive programme of modules that deliver both the theory and the essential industrial relevance employers seek from graduates. The course content encompasses all aspects of materials and biomaterials; their selection, manufacture, testing, assembly and environmental impact both during production and at the end of life.

What's the difference between MEng and BEng?

The first two years of a BEng or MEng share the same content, format and structure, with a good mix of theory, application and practical content from day one. The MEng differs from the BEng course by offering the opportunity to study technical and management topics at a more advanced level.

It is possible to transfer from a BEng to an MEng from the commencement of the course up to the end of the second year providing that the transfer progression criteria have been met.

Show more

Why you should choose us

Why you should study this course

You will be taught by a team of international experts and this course represents the very latest knowledge in this rapidly developing discipline.

The Biomaterials course has been designed to develop versatile materials scientists and engineers with a leaning towards industrial sectors such as healthcare, regenerative medicine and medical devices, but with the skills and flexibility to succeed equally well in aerospace, automotive, power generation and manufacturing amongst many others.

You will have access to STEMlab - a new, state-of-the-art, £17 million investment designed to advance and develop your learning and our other world class processing and characterisation facilities.

Take a tour of STEMLab

Professional recognition

This course is accredited by IOM3 providing a route to Chartered Engineering status following graduation.The Department strongly believes in the benefits professional institutes and industry bodies can bring, and finances membership for all students of the Institute of Materials, Minerals and Mining (IOM3).

What you'll study

Excited to learn more? For a taster of what you can expect to study on our Biomaterials Engineering BEng (Hons) degree, take a sneak preview of some of the modules you may have the opportunity to study below.

The information below is intended as an example only, featuring module details for the current year of study. Modules are reviewed on an annual basis and may be subject to future changes – revised details will be published through Programme Specifications ahead of each academic year. Please see Terms and Conditions of Study for more information.

Semester 1 & 2

Experimentation and Practical Skills

The aim of this module is to provide students with the knowledge and practical skills relating to materials testing, and their applications.

Semester 1

CAD and Engineering Drawing

Students are provided an introduction to computer-based engineering drawing tools (CAD). Student also learn of the standards and conventions found in engineering drawing and are also introduced to finite element analysis (FEA) and apply these skills to basic engineering problems.

Thermodynamics and Phase Equilibria

The aims of the module are to acquaint students with concepts of differing energies and relationships in processes; to enable them to assess equations and calculate energetics of reactions and processes; and to understand the phase changes and microstructural development occurring in the manufacture of engineering products.

Introduction to Product Design

The aim of the module is to provide an introduction to understanding of products and product design; to provide students with necessary skills and methodology to conduct idea searching and concept design.

Mathematics for Materials Part 1

Students are given to an introduction to the range of mathematical methods appropriate to the needs of first year materials engineering students.

Semester 2

Introductory Materials Science

Students are introduced engineering materials, their properties and applications. Students are also provided an understanding of the major principles used in determining the properties and structure of materials.

Engineering Analysis and Modelling

Students are introduced to computer aided materials selection with CES and apply these skills to typical engineering components, to engineering computing through MATLAB and apply these skills to basic engineering problems and are able to develop transferable skills, particularly with respect to oral presentation, report writing and group working.

Introduction to Materials Processing

Some students shown how to process a range of material types from raw material to finished part and how the selection of a processing method can influence the properties of the material.

Mechanics for Materials Part 1

Students are introduced to the basic principles of statics and the methods involved in one and two-dimensional stress and strain analyses.

Mathematics for Materials Part 2

Students are introduced to a range of mathematical methods appropriate to the needs of first year materials engineering students.

Materials Applications

Students are allowed to develop an understanding of recent developments in materials science with the module highlighting the use of advanced engineering materials in a variety of applications.

Semester 1 & 2

Materials Processing

Students are introduced to the underlying principle determining the processing, microstructure and resultant properties of a range of material types (including crystalline, semi-crystalline and amorphous) and to relate this to the application of these materials in product design.

Materials in Service Core

Materials in Service

Materials Characterisation

The aim of this module is to develop the understanding of crystallography and materials characterisation techniques, including electron microscopy and X-ray diffraction, Fourier transform, infra-red spectrophotometry (FTIR), raman spectroscopy and thermal-mechanical analysis methods.

Language Optional

Language

Semester 1

Anatomy and Physiology Part 1 Core

Anatomy and Physiology Part 1

Chemical and Biochemical Processes

This module introduces students to industrially significant aspects of organic chemistry, biochemistry, and microbiology.

Mathematics for Materials Part 3

This module aims to extend the range of mathematical methods introduced in first year.

Semester 2

Mechanics for Materials Part 2

Students are given an appreciation for stress, strain, bending and force balances, their relation to the sizing, design and form of structures/components under load(s) and the selection of materials for strength. To develop an understanding of energy systems incorporating combined heat and power (CHP).

Fracture Mechanics of Materials

Students are provided with a basic knowledge of criteria which determine how materials may fail in service, together with an understanding of properties and measurements related to materials failure and fracture.

Biomaterials Part 1 (Biomaterials for Tissue Engineering)

Students are provided an understanding of the types of materials used in tissue engineering and how they are able to relate this to the mechanical/physical/chemical properties of a material with its correct use in the different biological tissues. Students also consider the design and development of devices to replace or augment damaged or diseased body parts.

Statistics

Students are introduced to statistical approaches that are important in engineering design and production.

Semester 1 & 2

Biomedical Component Design

Students come to understand how to use basic design principles, including an appreciation of design requirements, constraints and approaches. They learn to use the principles of materials selection in conjunction with biological requirements and the different approaches adopted in commercial material selection systems and integrate their knowledge of biomaterials properties, manufacturing techniques and engineering principles in the solution of practical biomedical design problems.

Biomaterials Project

The module aims to provide students skills in being able to develop and conduct a research programme in the fields of Biomaterials science.

Language Optional

Language

Level 6 module(s) from the University module catalogue Optional

Level 6 module(s) from the University module catalogue

Semester 1

Surface Engineering

Students are given an appreciation of the importance of surfaces in engineering and how they may be modified by suitable coatings and treatments to produce the requisite characteristics to aid the successful operation of a given structure or component.

Biochemical Engineering

Students analyse biological processes based on an understanding of the principles involved. Students also develop strategies for processing biological materials based on available technologies.

Inclusive Design: Aging, Disability, and Vulnerability

This module works to improve students understanding of ageing and disability and the needs of other vulnerable users, and how these relate to design. This is underpinned with an understanding that references to models and legislation and explores the concepts of 'universal' and 'inclusive' design, as applied to particular applications.

Entrepreneurship and Innovation

Students are presented with a range of issues on managing entrepreneurship and innovation; to present a range of topics on small and medium-sized enterprises (SMEs), as these companies are an important channel for enacting entrepreneurship and the diffusion of innovation; and to develop relevant transferable skills.

Semester 2

Industrial Case Studies

The aim of this module is to provide students with a broad experience in the application of materials science and engineering in the context of particular industrial case studies and the associated issues of manufacturing, economic and legislative constraints. The module provides a mechanism for the integration of the knowledge gained in the various specialist modules by its practical application in the solution of 'real-life' engineering problems.

Composite Materials

The aim of the module is to provide students with a knowledge of the properties, processing and applications of composite materials and the development of new composites.

Biomaterials Part 2 (Biomaterials for Drug Delivery)

Students are provided with an understanding of the types of materials used in controlled delivery. Students then relate the mechanical/physical/chemical/biological properties of a material with its correct use for different types of delivery and consider the design and development of new materials and structures that can target delivery to specific organs/tissues and in specific timeframes.

Project Management

Students are provided with an understanding of the role of a project manager in a wide variety of industrial and commercial applications and an understanding of the project planning and control techniques and human resource management methodologies available to project managers.

How you'll be assessed

You are assessed by a mixture of coursework and written examinations.

This will vary from module to module, but overall the approximate ratio is 60/40 Exams/Coursework. Modules containing design-orientated work, individual and group projects are also assessed by oral presentation and in some cases poster presentation

How you'll study

With a blend of learning styles, we make sure you get the most from this course.

  • Lectures
  • Tutorials
  • Field trips
  • Independent study
  • Group work
  • Supervision
  • Laboratory work
  • Practical sessions

Placement year options

Our Biomaterials Engineering degree includes the option of a paid year working in industry.

Study abroad

Students also have the opportunity to undertake international study exchanges or work placements overseas including the UNITECH scheme. Successful completion can lead to the additional award of the Diploma for International Studies (DIntS).

Placement year

Our close links with industrial partners means we are able to provide our students with considerable help in sourcing and securing their placement.

The year in industry is optional but it is strongly encouraged because of the many benefits it can provide. Placement students earn a salary, typically over £16,500 per annum, and many are offered a permanent job with their host company when they graduate.

Placements can range from positions in healthcare technology, medical device and consumer product companies to large and small engineering companies across virtually all sectors and cover many roles including product and process development, technical projects, project management, quality assurance, research and analysis. Recent placement companies include: 3M, Johnson and Johnson, GSK, Proctor and Gamble, Unilever, Smiths Medical, D3O, CERN, Diagio, MediPlus, Nylacast and Pepsico.

 

Student placements – a unique opportunity

More than 1,400 Loughborough University students complete a 12-month placement each year. They join a range of organisations and deliver tangible benefits to their hosts as well as honing a range of workplace skills.

Where you'll study

Students enjoy a generous amount of hands-on practical work and this involves a lot of specialist equipment and laboratory spaces.

Recent investments in our own building and STEMLab have given us exceptional facilities for our students.

STEMLab is a state-of-the-art laboratory facility that opened for our students in 2017. It forms part of a wider £25M investment in the West Park of our campus, the home of our Engineering Schools, which includes an adjacent student learning and teaching hub.

STEMLab allows us to offer new ways to learn and collaborate, with a ‘drop-in’ engineering workshop, teaching laboratories, workshops, computer-aided design and rapid prototyping facilities, a design studio and informal learning spaces. These enhanced facilities will further increase our ability to train and develop skilled graduates that are targeted by major employers from across the world.

Typical offers

To learn more about the qualifications we typically accept, please select your country from the drop-down menu below.

Typical offers for United Kingdom

A-Level

ABB including two from Maths, Physics, Chemistry and Biology.

IB

34 (6,5,5 HL) including any two of Maths, Biology, Chemistry or Physics at HL. 

BTEC

BTEC Level 3 National Extended Diploma in a relevant subject: DDM with Distinctions in all Maths Units. 

GCSE

GCSE Maths Grade C/4

The typical offers and subject requirements for each course should be read alongside the University’s general entry requirements which give further details on acceptable subjects, alternative UK and international qualifications and minimum English language requirements.

Preferred subjects

BTEC Level 3 Diplomas preferred subjects: Aeronautical, Engineering, Mechanical or Manufacturing

Selection

Applicants are selected on the basis of their UCAS application. All UK based applicants are invited for interview in order to assess academic potential beyond that provided as part of the application, we hope that all applicants would take the opportunity to visit the department, meet staff and students, see facilities and get an insight into what it is like to be a student at Loughborough. In exceptional circumstances applicants may be offered a telephone interview if they are unable to attend the University.

Lithuania

Students with  Brandos Atestatas qualifications will be considered for direct entry to undergraduate degree courses. Please see the  for specific course requirements.

Australia

Typical offers for students from Australia are based on the Australian Tertiary Admissions Rank (ATAR). Typically, we would require a score between 85.00 and 94.00. For students from Queensland, requirements from the Overall Position (OP) would typically be between 8 and 4.

Further to the above, students would normally be required to pass one of the following qualifications:

  • ACT Year 12 Certificate
  • New South Wales Higher School Certificate (HSC)
  • Northern Territory Certificate of Education (NTCE)
  • Queensland Certificate of Education (QCE)
  • South Australian Certificate of Education (SACE)
  • Tasmanian Certificate of Education (TCE)
  • Victorian Certificate of Education (VCE)
  • Western Australian Certificate of Education (WACE)

Where courses have specific subject requirements, these will be expected to be studied within one of the above qualifications. Grades of ‘B’ (ACT, NTCE, SACE, VCE, WACE), ‘4’ (HSC), ‘CA’ (TCE), ‘HA’ (QCE) or higher will normally be required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Austria

For students taking the Austrian Reifeprüfung (Matura), we typically require an average score between 2.2 and 1.2 from 6 written or spoken exams. Where courses have specific subject requirements, a score of or 1 will normally be required in each.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Bahrain

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements

Belgium

The Certificat d’Enseignement Secondaire Supérieur (CESS) and Diploma van Secundair Onderwijs (DSO) are both acceptable qualifications for direct entry into first year undergraduate courses. We typically require an overall score ranging from 75% to 85%. Where the 20 point marking scale is used, we would typically require marks between 15/20 and 17/20.

Specific subject marks may be required for some courses and where this is the case, this should be studied as a 4 hour subject. Where courses require achievement in GCSE Maths, we would normally look for a score of 50% or higher in Maths within the CESS or DSO.

Students currently studying the Abschlusszeugnis der Oberstufe des Sekundarunterrichts should contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Brazil

Students taking the Brazilian High School Certificate(Certificado de Ensino Médio and Exame Nacional do Ensino Médio – ENEM) will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Brunei

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Bulgaria

For students taking the Diploma za Sredno Obrazovanie, we would typically ask for an overall score ranging from 5.3 6.0 overall with specific subject marks required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.5 or higher in Maths within the Diploma za Sredno Obrazovanie.

All students must also achieve the University’s English language requirements.

Canada

Typical offers for students from Canada are based on having completed Grade 12. The information below outlines the requirements for different states:

Alberta, Northwest Territory, Nunavut

  • Typical offers are based on an average of best 5 grade 12 courses in the General High School Diploma and offers typically range from 80% - 93%.
  • Where courses require specific subjects, these should be taken as thirty-level courses. Where A Level Maths is a course requirement, both Mathematics 30-1 and Mathematics 30-2 should be completed.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

British Columbia, Yukon Territory

  • Typical offers range from ‘BBBBBB’ – ‘AAAAAA’ from best 6 grade 12 subjects in the Senior Secondary Graduation Diploma.
  • Where courses require specific subjects these would normally need to be achieved at ‘A’ or ‘B’.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of ‘C’ or higher in grade 10 Maths.

Manitoba

  • Typical offers are based on an average of best 5 subjects at 300 level in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

New Brunswick, Prince Edward Island, Quebec, Saskatchewan

  • Typical offers are based on an average of best 5 grade 12 subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses. Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Newfoundland & Labrador

  • Typical offers are based on an average of best 5 university preparatory level subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Nova Scotia

  • Typical offers are based on an average of best 5 subjects at level 4 or 5 in the High School Completion Certificate and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Ontario

  • Typical offers are based on an average of best 6 grade 12 courses at ‘4U’, ‘4M’ or ‘DU’ in the Ontario Secondary School Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

 

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

China

Students taking the Senior Middle Examinations will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within China as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Croatia

For students taking the Croatian Matura (Svjedodžba o Maturi), we typically require an average score between 4.0 and 5.0 from best 4 subjects.

Where courses have specific subject requirements, a score of 4 or 5 will normally be required in each. For courses that require Maths as part of their A Level offer, this should be taken at extended level in the Matura.

All students must also achieve the University’s English language requirements.

Cyprus

The Apolytirion is not accepted for direct entry to the University when studied on its own. However, we are happy to consider students taking the Apolytirion alongside either 1 or 2 A Levels. For courses with typical offer requirements of ‘ABB’, we would typically require 19.5 in the Apolytirion alongside an ‘A’ at A Level or 18.0 in the Apolytirion alongside ‘AB’ at A Level. Where courses require specific subjects, these must be taken at A Level.

Where courses require achievement in GCSE Maths, we would normally look for a score of 17 or higher in Maths within the Apolytirion.

Students taking the Apolytirion without additional A Levels will need to complete a suitable Foundation Year. Loughborough University has its own Foundation Year, alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Czech Republic

For students taking the Czech Maturita (Vysvědčení o Maturitní Zkoušce), we typically require an average ranging from 2.00 to 1.00 from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All applicants must also achieve the University’s English language requirements.

Denmark

For students taking the Bevis for Studentereksamen (STX), typical offers range from 8.0 to 10.5 in the weighted average mark from the STX. Some courses may require marks (either 10 or 12) in specific Level A subjects.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Level C Maths with the STX.

Students who have taken the Studentereksamen under the old grading system would be considered on a case by case basis with an average between 9.0 and 11.0 normally required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Egypt

Students who have studied the Thanaweya A’ama (Certificate of General Secondary Education) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Estonia

For students taking the  Gümnaasiumi lõputunnistus with the Riigieksamitunnistus, we typically require a high average grade between 4.3 and 4.8 in the Gümnaasiumi lõputunnistus as well as an average percentage between 77% and 90% in the Riigieksamitunnistus.

Specific subject marks may be required for some courses. For Engineering and Science courses, we would expect students to have studied Lai Matemaatika.

Students with a score of 4.0 with 70% average from state exams would be considered on a case by case basis for the Loughborough University Foundation Year

All students must also achieve the University’s English language requirements.

European Baccalaureate

For students taking the European Baccalaureate, we typically require an overall average mark between 78% and 88% with specific subject marks (normally 8.0 or higher from a 4 or 5 period subject) required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6.5 or higher in Maths 3.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details. When applying, please state whether you are taking English as Language 1, 2, 3 or 4.

Faroe Islands

Students taking the Studentsprógv would normally be required to achieve a score between 8.0 and 10.5 with specific subject marks (either 10 or 12) required for some courses.

All students must also achieve the University’s English language requirements.

Finland

For students taking the Ylioppilastutkinto / Studentexamen, typical offer requirements would normally be based on achievement in best 4 subjects. Offers will typically be expressed as four letter grades ranging from MMMM (achieve Magna cum laude approbatur or higher in four subjects) to LEEE (achieve Eximia cum laude approbatur or higher in four subjects with at least one subject at Laudatur).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Lukion Päästötodistus

All students must also achieve the University’s English language requirements.

France

For students taking the French Baccalaureat, we typically require a range from 13.0 – 15.5 with specific subject marks required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Science (‘S’) stream. Students following the Option Internationale (OIB) will often receive a slightly lower offer.

Where courses require achievement in GCSE Maths, we would normally look for a score of 10 or higher in Maths within the Baccalaureat.

Students taking the Baccalaureat Technologique will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Germany

Students taking the Abitur typically require an overall score ranging from 1.3 - 2.0 with specific subject marks required for some courses (normally between 12and 15).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Abitur.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Ghana

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Greece

Students taking the Greek Apolyterion are normally required to also take the Panhellenic Exams. Typical offers are based on the General Access Grade in the Panhellenics and range from 16.5 to 19.0 depending on the course applied for. Where courses have specific subject requirements, these should be taken as ‘Direction’ subjects within the Panhellenics. Students applying for Science or Engineering courses would generally be expected to have followed the Sciences direction. We will also normally ask for a mark between 17.0 and 19.0 in the Apolyterion certificate.

Students who have studied 1 or 2 A Levels alongside the Apolyterion (without taking the Panhellenic Exams) would normally be required to obtain high grades in their A Level  exams along with an average mark of between 17.0 and 19.0 in the Apolyterion. Where courses have specific subject requirements, these should be taken as A Levels.

Students taking a Foundation course alongside the Apolyterion will be considered on a case by case basis.

All students must also achieve the University’s English language requirements.

Hong Kong

Typical offers for students taking the HKDSE  vary by course and range from ‘5, 4, 4’ – ‘5*, 5, 5’ from best 3 subjects, of which 2 must be electives and excluding Liberal Studies and Chinese. Where courses require specific subjects, we would be looking for grades between ‘4’ and ‘5*’ in these subjects.

For courses that require Maths as part of their A Level offer, this should be taken at extended level in the HKDSE. Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in core Maths.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Hungary

For students taking the Hungarian Matura (Érettségi Bizonyítvány), we typically require an average ranging from 70% to 83% from best 5 subjects which must include at least 2 higher level exams.

Where courses have specific subject requirements, a score of between 70% and 90% would normally be required in a higher level exam.

All students must also achieve the University’s English language requirements.

Iceland

For students taking the Stúdentspróf, we typically require an overall grade between 8.0 and 9.3 with specific subject marks (between 8 and 10) required for some courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

India

India

Typical offers are based on the Standard XII school leaving qualifications. When awarded by CBSE, ISCE or West Bengal Exam Boards, we typically ask for results in the region of 78% - 88% average performance from best 4 subjects. For other state boards, we would be looking for achievement between 83% - 93% from best 4 subjects. Specific subject marks at Standard X or Standard XII may be required for some courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Indonesia

Students who have studied the Ijazah: Sekolah Menengah Atas/Madrasah Aliyah (SMA/MA) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Ireland

Students who have taken the Leaving Certificate under the new grading system (post 2016) would normally be required to achieve 5 higher level passes with grades ranging from H2 H2 H3 H3 H3 to H1 H1 H2 H2 H2. Where courses have specific A Level subject requirements, these should be taken at higher level.

If you have taken the Leaving Certificate under the old grading system (pre 2016) our typical offers would be between B1 B1 B2 B2 B2 and A1 A1 A2 A2 A2.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Israel

For students taking the Bagrut, we would require students to have studied at least 21 study units. Typical offers will be based on average percentage from 3 best 5-unit level subjects with requirements ranging from 78% to 92% depending on the course. Please note that we do not use the Optimal Average and do not consider bonus points as part of our offers.

Where courses have specific subject requirements, we would expect these to be studied as a 5-unit subject and look for achievement between 80% and 95%.

All students must also achieve the University’s English language requirements.

Italy

For students taking the Diploma di Esamo di Stato, we typically require an overall score ranging from 85% - 98% overall. Where courses require specific subjects, we would be looking for marks between 8 and 10 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in school assessment for Maths.

Students taking the Diploma di Istituto Tecnico will be considered for first year entry on a case by case basis where subjects studied are relevant to the course for which they have applied.

All students must also achieve the University’s English language requirements.

Japan

Students taking the Kotogakko Sotsugyo Shomeisho (Upper Secondary School Leaving Certificate) will need to complete a suitable Foundation Year

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within Japan as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Jordan

Students taking the Tawjihi (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

Students must also achieve the University’s English language requirements.

Kazakhstan

Typical offers for students from Kazakhstan are based on the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate. Typically, we would require a score between AAA and BBB from Advanced level subjects.  Where courses  have specific subject requirements, these will be expected to be studied at Advanced level.

English language studied within the Nazarbayev Intellectual Schools (NIS) Grade 12 Certificate is not sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Kenya

Students taking the Kenya Certificate of Secondary Education will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Kuwait

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Latvia

For students taking the Atestāts par Vispārējo Vidējo Izglītību, we typically require a high average grade between 9.2 and 10.0 as well as an average between 87% and 95% from best 4 state exams.

Where courses have specific subject requirements, a score between 87% and 95% will normally be requested in state exams in these subjects.

Students with a score of 8.0 with 80% average from best 4 state exams would be considered on a case by case basis for the Foundation Year.

All students must also achieve the University’s English language requirements.

Lebanon

Students taking the Baccalauréat Général will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Students must also achieve the University’s English language requirements.

Lithuania

For students taking the Brandos Atestatas, typical offers generally range from 9.0 – 10.0 overall. We would also typically ask for an average percentage from the best 3 state exams between 80% and 94%. Where courses require specific subjects, we would typically require these to be taken as state exams.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in school assessment for Maths.

All students must also achieve the University’s English language requirements.

Malaysia

For students taking either the Matrikulasi (Matriculation Certificate) or the Sigjil Tinggi Persekolahan Malaysian (STPM), we would typically require grades ranging from AAA-BBB from best 3 (core) subjects excluding general studies.

Where courses require achievement in GCSE Maths, we would normally look for a grade C or higher in SPM (Sijil Pelajaran Malaysia) Maths.

For students taking the Unified Examination Certificate (UEC) we would typically require from the best 7 subjects grades ranging 2xA1 5xA2 to 7xB3 in the UEC-SML. Where courses require achievement in GCSE Maths, we would normally look for a grade B6 or higher in Maths.

  • Students taking the MARA Diploma will be considered for first year entry on a case by case basis.                                                                                                                             
  • Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Malta

For students taking the Advanced Matriculation Exam, typical offers would normally be based on achievement in 2 advanced level subjects (typically between BB and AA) and 3 intermediate level subjects excluding Systems of Knowledge (typically between BCC and AAA).

Where courses have specific subject requirements, a score of B or A will normally be required in an Advanced Level subject. Where courses require achievement in GCSE Maths, we normally look for a score of 4 or higher in Maths within the Secondary Education Certificate (SEC).

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Netherlands

For students taking the Voorbereidend Wetenschappelijk Onderwijs (VWO)., typical offers range from 6.6 to 7.4 average from the VWO with specific subject marks (between and 9) required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Natuur en Techniek stream within the VWO and have taken the Maths D course.

Where courses require achievement in GCSE Maths, we would normally look for a score of 5 or higher in Maths within the VWO.

Students taking the Middelbaar Beroepsonderwijs (MBO Level 4) certificate will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for. Please contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

New Zealand

For students taking the National Certificate in Educational Achievement (NCEA) Level 3 typical offers will be based on overall achievement in the NCEA plus a required number of credits achieved at the next level up. For example, where A Level requirements are ABB, we would normally require a Merit overall with 20 Level 3 credits achieved at Excellence.

Where courses have specific subject requirements, these should be studied at Level 3 within the NCEA. Typically, an overall achievement of Merit or Excellence will be required in these subjects.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Nigeria

Students taking the WASSCE will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Norway

For students taking the Vitnemål for Videregående Opplæring, typical offers range from 4.00 to 5.25 average of all Final Assessment Grades.

Where courses have specific subject requirements, students will need to achieve a or higher in at least two 140-hour courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Oman

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Pakistan

Students taking the Intermediate/Higher Secondary School Certificate (HSSC) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Poland

For students taking the new Matura typical offers are based on average achievement from 3 extended level exams and offers normally range from 75% - 85%. Where courses require specific subjects, these should be taken as extended level exams and we would normally look for marks between 75% and 90%.

Where courses require achievement in GCSE Maths, we would normally look for a score of 68% or higher in the compulsory standard level Maths.

All students must also achieve the University’s English language requirements.

Portugal

Students taking the Diploma de Ensino Secundário would normally be required to achieve a score between 16.5 and 18.5 with specific subject marks (between 17 and 19) required for some courses.

Where courses require achievement in GCSE Maths, we normally look for a score of 14 or higher in Maths within the Diploma de Ensino Secundário.

All students must also achieve the University’s English language requirements.

Qatar

Students taking the Shahadat Al-Thanawaya Al-Aama (Senior School Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Romania

For students taking the Diploma de Bacalaureat, typical offers range from 8.6 – 9.4 overall. Where courses require a specific subject, we would be looking for this to be studied as the optional subject within the Diploma de Bacalaureat with marks between 8.6 and 9.8.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Grade 10 Maths from the ‘Foaie Matricola’ or 6.5 or higher in Maths from the Diploma de Bacalaureat.

All students must also achieve the University’s English language requirements.

Russia

Students taking the Certificate of Unified State Examination will need to complete a suitable .

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the for specific course requirements.

All students must also achieve the University’s English language requirements.

Saudi Arabia

Students who have studied the Tawjihiyah (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Singapore

For students with Singapore A Levels, typical offers normally range from BBC to AAA from three H2 Level subjects and offers are typically one grade lower than the typical A Level requirement as stated in the undergraduate prospectus due to the comparative difficulty.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required in line with UK A Level requirements.

Students with a Diploma from one of Singapore’s five Polytechnics would be considered for first year entry with requirements ranging from 2.50 to 3.10. Second year entry may be considered in some cases. Please contact the International Office to check if this is applicable.

For IB requirements please see the undergraduate prospectus.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Slovakia

For students taking the Slovakian Matura (Vysvedčenie o maturitnej skúške), typical offers range from 2.00 to 1.00 average from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All students must also achieve the University’s English language requirements.

Slovenia

For students taking the Maturitetno Spričevalo., we typically require an overall total score of between 22 and 30 out of 34.

Where courses have specific subject requirements, a score of or 5 will normally be required in each. Applicants for Science or Engineering courses would normally be required to take Maths at higher level and would be required to achieve a mark of between 6 and 8.

All students must also achieve the University’s English language requirements.

South Africa

For students taking the National Senior Certificate (NSC), typical offers range from 6,6,6,6,6 to 7,7,7,7,7 from the best 5 subjects, excluding Life Orientation.
 
Where courses have specific subject requirements, a score of or would normally be required.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

South Korea

Students taking the High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Spain

For students taking the Titulo de Bachillerato, we typically require an overall score of 7.50 – 9.50.

Where courses have specific subject requirements, a score of 8.00 or 9.00 will normally be required in each.  Where courses require achievement in GCSE Maths, we would normally look for a score of 5.50 – 6.50 within the Titulo de Bachillerato.

All students must also achieve the University’s English language requirements.

Sri Lanka

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Sri Lankan A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Sri Lankan A Levels, an A grade is acceptable to meet this requirement where applicable.

All students must also achieve the University’s English language requirements.

Sweden

For students tasking the Avgångsbetyg / Slutbetyg från Gymnasieskola, typical offers are normally based on an average score from 2500 credits with an ‘A’ counting as 20 points, a ‘B’ counting as 17.5 points, a ‘C’ counting as 15 points etc. Typical offers range from 16.0 to 18.8 average from 2500 credits.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required from 2 relevant subject modules within the Slutbetyg.

Students who took the Avgångsbetyg / Slutbetyg från Gymnasieskola under the old grading system are considered on a case by case basis with most courses requiring a majority of ‘VG’ and ‘MVG’ grades.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Switzerland

Students taking the following qualifications would be considered for direct entry to undergraduate courses: Certificat de MaturitéMaturitätsausweisAttestato di Maturità. Typical offer requirements are based on average achievement from best 12 subjects and offers typically range from 4.8 – 5.5. Where courses require specific subjects, we would be looking for marks between 5.0 and 6.0 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.0 or higher in school assessment for Maths.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Taiwan

Students taking the Senior High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Alternatively, Junior College Diploma holders may be considered on a case by case basis for entry to undergraduate courses.

All students must also achieve the University’s English language requirements.

Tanzania

The Advanced Certificate of Secondary Education Examination (ACSEE) is acceptable for entry into the first year of undergraduate courses. Typical offers are the same as for UK A Levels as stated in the Undergraduate Prospectus.

For courses which require achievement in GCSE Maths, we normally look for a score of C or higher in Maths in the Certificate of Secondary Education (CSE).

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Thailand

Students taking the Certificate of Secondary Education/Maw 6 will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

The Caribbean

For students taking the Caribbean Advanced Proficiency Examination (CAPE), we typically require a range from ‘2, 2, 2’ -  ‘1, 1, 1’ achieved from three 2-unit exams with specific subject marks of ‘1’ or ‘2’ required by some courses

Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in Caribbean Secondary Education Certificate (CSEC) Maths.

Requirements for American SATs and APs can be found under the country requirements for USA.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

The Gulf

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Turkey

For students taking the Anadolu Lisesi (Anatolian High School Diploma) or Fen Lisesi (Science High School Diploma), will typically require a pass mark of higher than 80%,

Students taking the Lise Bitirme Diplomasi, will be considered for first year entry on a case by case basis.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Uganda

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. The Uganda Advanced Certificate of Education (UACE) is also acceptable with grades equivalent to the typical A Level offer requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

United Arab Emirates

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

United States of America

For students studying in the American education system, typical offers for entry onto undergraduate level courses are based on obtaining between 3.2 and 3.8 in the High School Diploma along with achievement in Advanced Placement Exams (from our approved list) or SAT II Subject Specific Tests. We would typically require between ‘4, 4, 4’ and ‘5, 5, 5’ in 3 AP exams from our approved list below or between ‘650, 650, 650’ and ‘750, 700, 700’ in 3 SAT subject tests.

Approved List of AP Exams:

  • Biology
  • Calculus AB
  • Calculus BC
  • Chemistry
  • Physics (as half courses B and C)
  • English Literature and Composition
  • English Language and Composition
  • French Language
  • French Literature
  • German Language
  • Italian Language and Culture
  • Latin Literature
  • Latin: Vergil
  • Spanish Language
  • Spanish Literature
  • European History
  • United States History
  • World History

Applicants who have taken 2 AP Exams from the above list and at least 2 other AP Exams will normally be considered but are advised to contact their chosen Department in advance. We also welcome applications from students who are studying 3 IB Higher Level Certificates alongside the High School Diploma.

Where courses have an A Level maths requirement, it would be necessary for applicants to achieve a high mark in AP Calculus BC. For programmes that require achievement in GCSE Maths, we would normally look for a score of ‘570’ or higher in SAT I Math.

To satisfy English language requirements, we normally ask for a score of ‘610’ in SAT I Evidence-Based Reading/Writing although some programmes have higher requirements. 

If you have completed the High School Graduation Diploma without taking AP Exams, SAT subject tests or IB Higher Level subjects, you may be eligible for our International Foundation programme.

Vietnam

Students who have studied the Bằng Tốt Nghiệp Phổ Thông Trung Học  will need to complete an appropriate Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Zambia

Students who have studied the General Certificate of Education will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Zimbabwe

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses.

Please see the undergraduate prospectus for specific course requirements.

Zimbabwe A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Zimbabwe A Levels, an A grade is acceptable to meet this requirement where applicable.  Typical offers for students taking the Zimbabwe A levels exclude the General Paper.

All students must also achieve the University’s English language requirements.

The University uses contextual data in the admissions process to provide insights into the context in which your academic qualifications have been achieved. This may influence the typical offers listed above.

Tuition fees for 2019 entry

UK / EU fees

Full-time course per annum
£9,250
Placement year
Approx. 20% of the full-time fee

International fees

Full-time course per annum
£22,350
Placement year
Approx. 20% of the full-time fee

The fees stated above are for the 2019/20 academic year; fees for 2020/21 have not yet been confirmed by the UK government. We will update this information as soon as it is available. Fees are reviewed annually and are likely to increase to take into account inflationary pressures.

Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, IT equipment and other support services. University fees and charges can be paid in advance and there are several methods of payment, including online payments and payment by installment.

Additional costs

Materials students are provided with an excellent general Materials textbook, a laboratory workbook, a Labcoat and other necessary protective equipment when required. However your tuition fee doesn’t cover everything. For instance this course doesn’t cover the cost of any stationary, printing, books or re-assessments which you might need.

Scholarships

UK/EU applicants: Competitive, merit-based year of entry scholarships are paid to eligible firm first-choice Materials Science and Engineering students in semester 2 of the first year of their course to contribute to living and other costs.

  • £3,000: A*AA at A level
  • £2,000: AAA at A level

Scholarships for other qualifications are also available. Contact Dr Mark Jepson, Admissions Tutor, for more details.

Your future career

Employed graduates in professional or managerial roles

98%

DLHE 2017 (across the department)

Average starting salary

£26,500

DLHE 2017 (across the department)

As this is a new course, we don't have any graduates yet, but possible career areas include the research environment, pharmaceutical, healthcare and medical device development sectors.

There are excellent career prospects in Biomaterials related and healthcare sectors spanning both passive devices (e.g. orthopaedic implants, prosthetics, contact lenses etc.) through to active devices encompassing a range of medical device technologies (e.g. pacemakers, cochlear implants and insulin pumps). Many other career opportunities also exist, in sectors more usually associated with Materials Engineering such as Automotive, Aerospace, Construction, Sports and Leisure, Electronics, Food and Retail, together with more generic careers in business, banking/finance and general management.

Recent graduates from similar courses are employed by 3M, Clariant, Diageo, Fluor, Pfizer, Rolls Royce, Airbus, Hanson, Morgan Advanced Materials, TATA, Mercedes Benz, Bosch, Pirelli.

Career Support Services

Your time at Loughborough University will form a launchpad from which you can build an exciting career. With so many opportunities available, you’ll never be short of ways to improve your employability.

Our award-winning Careers Network team is here to help and support you, offering everything from CV workshops, one-to-one advice sessions and mock interview practice sessions to high-profile employer events. We’ve got everything you need for a really successful future.

Companies students have worked for after graduating

As this is a new course, we don't have any graduates yet. However, graduates from similar courses have been employed by: