Industrial Design and Technology BA (Hons) DIntS / DPS degree BA (Hons) degree

4 years full-time sandwich

Typical offer
ABB
UCAS code
H776
Institute code
L79
Start date
30 September 2019
UK / EU fee
£9,250
International fee
£22,350
Subject area
Design
Typical offer
ABB
UCAS code
H775
Institute code
L79
Start date
30 September 2019
UK / EU fee
£9,250
International fee
£22,350
Subject area
Design

Overview

This Industrial Design and Technology BA (Hons) degree will equip you with skills and understanding to effectively develop and communicate design ideas - all while factoring in the ergonomics of usability and interaction, product styling, three-dimensional designing and the production and use of prototypes as a key part of design practice.

Our Industrial Design and Technology degree concentrates on the development of skills and ability in the development and communication of ideas, ergonomics, interaction, the techniques of planning and costings, product styling, three-dimensional design, materials, manufacturing processes and the production of prototypes and finished artefacts. The Industrial Design and Technology degree specialises in the understanding of the creative form and the aesthetics of manufactured products.

Our BA Industrial Design degree tends to look at the product from the outside in. Students in their final year have the opportunity to exhibit their work in our annual design degree show, for an insight into what you can expect to achieve on this course take a look at some of their final year projects here.

Show more

Why you should choose us

Professional recognition

Industrial Design and Technology BA (Hons) is accredited by the Institute of Engineering Designers IED

What you'll study

On our Industrial Design and Technology degree, all teaching and learning is completed via a number of modules across two semesters. Modules are covered using a combination of lectures, practical classes, workshops, CAD sessions, computer laboratory sessions, working with tools and machinery in tutorials in groups and one-on-one with academic staff, practical demonstrations, studio sessions and independent study.

The information below reflects the currently intended course structure and module details. Updates may be made on an annual basis and revised details will be published through Programme Specifications ahead of each academic year. Please see Terms and Conditions of Study for more information.

Year 1 aims to help you develop designing and making skills, including 2D sketching and drawing, 3D physical modelling (e.g. in foam and resistant materials), computer aided design and an understanding of basic electronics, mechanics and materials technologies as they relate to industrial design.

Semester 1 & 2

Year 1 Design Practice

This module is taken by all undergraduate students in Year One on all three of the School’s undergraduate courses. The module will give you an understanding of the fundamentals of designing products, the importance of the user and market need, the designer client relationship and the role of the design team. Problem investigation and solving methods are explored along with development of fundamental design skills and presentation methods. You will cover appropriate design modelling/presentation techniques, including: 2D and 3D virtual and physical prototyping, sketching and general assembly drawings. This module will involve classroom and workshop based activities.

Industrial Design Studies 1

This module covers the basic understanding of product semantics and introduces you to branding within the context of industrial design. You will look at form, colour and texture and how to analyse and present visual research information. You will also cover how to generate design concepts from a range of data and semantic concepts.

Prototyping for Design

This largely practical module introduces you to prototype planning and three-dimensional manufacturing techniques required to realise your designs. It also allows students to appropriately communicate design intent through the use of engineering drawings and notation.

Technology in Industrial Design

In this module you gain a basic understanding of technology i.e. electrical, electronic and mechanical systems and materials as they relate to industrial design. You will also learn how to use software to model simple electronic circuits and basic measuring equipment to analyse them.

User Centred Design Practice

This module looks at the core concepts relating to user centred design and its place in design practice. It will cover the philosophical approach that user centred design requires and how it can be applied to the development of products, services and systems. It will cover the difference between user centred design, user involvement, participatory design and co-design and show how these approaches complement each other.

Design Research and Professional Practice 1

This module explores design from an academic perspective.  This will include reviewing the changing role of the designer and building knowledge, skills and values inherent in design practice.

Year 2 encourages the learning of further knowledge and skills in product styling, user research, computer aided manufacturing, branding, model-making, and manufacturing and materials. Design projects are undertaken alongside an associated lecture course.

Semester 1

Design Research for Practice

The aim of this module is to deepen and expand your understanding of, and proficiency in selecting and applying, qualitative data collection, analysis and synthesis techniques for design research; emphasising the relevance of research insights in informing design opportunities.

Semester 1 & 2

BA Design & Manufacturing Technologies

This module will help you gain an understanding of the relationship between design and manufacturing. You will work as part of a team to produce a small product using an injection mould tool that you will design and produce as part of the project. You will also learn about various materials and the processing they can undergo such as the joining of metals, polymers and ceramics.

Design Communication

The aim of this module is for you to: extend and enhance the industrial design modelling, communication and presentation techniques introduced in part A modules: Year 1 Design Practice

 

Industrial Design Studies 2

You will learn to manage a programme of industrial design, involving concept generation, design development and product presentation. This will include a focus on product form and user interface, as well as an introduction to the principles of eco-design.

Year 2 Design Practice

In this module you will look at advanced industrial design technologies including social trends, PEEST analysis and user and brand research. You will also be working in groups to develop a design project.

In your final year you will use all of the experience and knowledge you have gained in previous years to complete a number of projects that include live industry projects. During this year you will complete your final project, which is usually displayed at the School’s annual Degree Show in June.

Semester 1

Industrial Design Studies 3

In this module you will take what you have learned across years 1 and 2 to enter an international student design competition. Topics will include design research, user research, generation of insights from research data, concept generation and development, communication of research and design outcomes, identification of user needs and problem solving.

Sustainable Design

In this module you will gain the knowledge and skills required to develop innovative sustainable design solutions.

Product Design and Failure

The aim of this module is to inform you of examples of the practical application of good and bad design on product safety. Using examples of real world design and failure, the quality, effectiveness and safety of products will be explored in order to better understand the needs of users.

 

Computer Aided Modelling and Manufacture (CAMM)

This practical module builds on the CAD/CAM skills you have developed during Year 1 and 2. During this module you will look into core and advanced modelling techniques, modelling strategy, 3D rendering, 3D CNC machining, virtual prototyping, rapid prototyping and the advanced use of CAD throughout the product design lifecycle.

Computer-aided Ergonomics

This module uses CAD to help you understand human modelling in particular posture, fit, reach, vision and the use of body scanning technologies. As well as a hands-on approach, this module uses case studies from a variety of fields including automotive, rail, aerospace and consumer products.

Entrepreneurship & Innovation

This module is delivered by the Business School and focuses on the nature of enterprise, innovation, the protection of intellectual property, business plans and government policy to support innovation.

Universal Design

This module develops your knowledge and understanding of designing for elderly and disabled people within a mainstream population.

User Experience Design

This module will help you to broaden your experience and skills as a designer in user centred design principles and with screen-based product design and communication.

Semester 1 & 2

Design Research

The aim of this module is an in-depth study related to design on a subject chosen by the student and approved by staff. It involves setting research questions, reviewing literature, selecting and implementing research methods, collating and presenting results, discussion and conclusions.

Final Year Design Practice

This module is an extended project across both semesters and focuses on the selection, application and management of an appropriate design process. The module provides a significant example of your design and innovation capability for your portfolio and Degree Show. This module is the culmination of your design studies and an opportunity to display the breadth and depth of your abilities; integrating all that you have learned from previous modules. You can see examples from this module on the Design School’s website.

Live Projects

The aim of this module is to provide two live design projects with briefs set by leading companies that mimic activity in a design consultancy where initial responses to client briefs need to be generated rapidly.

How you'll be assessed

Assessments for modules will include: reports, CAD files, essays, assessed laboratory sessions, class tests, group presentations and reports, submission of prototypes, folios, logbooks, e-posters, presentation boards, computer simulations and examinations.

How you'll study

  • Lectures
  • Independent study
  • Supervision
  • Workshops
  • Practical sessions

Sandwich year options

Our Industrial Design and Technology degree offers you the opportunity to study abroad for a year or to undertake a placement year.

Additional award

By undertaking a year in placement or a year abroad, you will gain an additional award alongside your final qualification. If you complete an industrial placement year you will gain a Diploma in Industrial Studies (DIS). If you undertake a professional placement year you will gain a Diploma in Professional Studies (DPS) or if you study abroad for a year you will gain a Diploma in International Studies (DIntS).

Study abroad

Students on our Industrial Design and Technology degree will alternatively have the opportunity to spend time studying abroad as part of the Erasmus+ Exchange Programme. They can study for one semester at a partner university followed by a 6 month work placement during Year 3 of their degree course. Successful completion leads to an additional award upon graduation called the Diploma in International Studies (DIntS).

The School currently has exchange links with universities in Germany, Netherlands, Norway, Turkey and Italy. Find more information about studying abroad on the Design School website.

Placement year

The Industrial Design and Technology degree offers the opportunity to include a placement year in your degree - on successful completion of which you will be awarded an additional qualification (Diploma in Professional Studies - DPS.)

Typically students complete the year-long (minimum of 45 weeks) placement with one company, but it can comprise of up to three separate placements either in the UK or overseas.

Usually students spend the first few weeks getting to grips with what the company does and how things work, then progressively they will work on projects, taking on more responsibility as time goes on. In the past some students have impressed the placement companies greatly, having some of their ideas patented and developed into real life products and services. A number of students are also offered a permanent job with their placement employer after graduation and some companies also choose to sponsor students in their final year of study.

Completing a placement is a great way to enhance your CV, put learnt theory into practice, allow you to 'test-drive' a potential career and provide motivation and focus for final year studies. You can find more information about placement years on the Design School website.

Dominic Hensman

Dominic Hensman completed a 12-month internship with Clayesmore School, and was nominated for a Loughborough University award in recognition of his achievements.

Recent placement destinations of students in the Design School include:

Lego; Vax; Walt Disney; Princess Yachts; Reckitt Benckiser; Unilever; RGK Wheelchairs; Adidas' Pavegen; IBM; Rolls Royce; Hornby Hobbies; Tesco
Diageo; Cath Kidson; Puma; Microsoft; Jaguar Land Rover; Bentley; Nissan; Smallfry; Mondelez; Telegraph Media Group; Triumph Motorcycles.

Where you'll study

If you choose to study our Industrial Design degree you'll be based in our Design School - a purpose built £21 million building. The design of the building has collaborative working at its heart, providing an inspirational environment for all those who work in it.

Knowledge and skills advancement are at the centre of everything we do, pushing innovation and creativity to its highest potential. Aiding us in our pursuit are our fantastic facilities - industry specification machinery, purpose built teaching areas and specialist laboratories provide a state-of-the-art learning and teaching environment for all of our students.

These include:

  • Computer Aided Design/Manufacturing (CAD/CAM)
  • Engineering machine workshop
  • Rapid prototyping area/3D printing
  • Metal fabrication workshop
  • Multi materials workshop
  • Electronics laboratory

Typical offers

To learn more about the qualifications we typically accept, please select your country from the drop-down menu below.

Typical offers for United Kingdom

A-Level
ABB including Design and Technology or Art and Design
IB
34 (6,5,5 HL) including HL Design Technology or Visual Arts with 4 at SL Maths or 5 in SL Maths Studies
BTEC
BTEC Level 3 National Extended Diploma in Art and Design: DDM
GCSE
GCSE Maths Grade C/4.

The typical offers and subject requirements for each course should be read alongside the University’s general entry requirements which give further details on acceptable subjects, alternative UK and international qualifications and minimum English language requirements.

All short-listed candidates are invited for interview, and asked to bring and present a design task and portfolio. Non-UK based applicants are given the option of an online interview.

Preferred subjects

BTEC Level 3 Diplomas preferred subjects: Art and Design

Selection

Applicants are selected on the basis of their UCAS application and also a portfolio submission, design task and interview (online interview for non-UK based applicants) in order to assess academic potential beyond that provided as part of the application. An interview also gives applicants the opportunity to visit the Design School, meet staff and students, see facilities and gain an insight into what it is like to be a student at Loughborough. More information on portfolios can be found on the Design School webpages.

Australia

Typical offers for students from Australia are based on the Australian Tertiary Admissions Rank (ATAR). Typically, we would require a score between 85.00 and 94.00. For students from Queensland, requirements from the Overall Position (OP) would typically be between 8 and 4.

Further to the above, students would normally be required to pass one of the following qualifications:

  • ACT Year 12 Certificate
  • New South Wales Higher School Certificate (HSC)
  • Northern Territory Certificate of Education (NTCE)
  • Queensland Certificate of Education (QCE)
  • South Australian Certificate of Education (SACE)
  • Tasmanian Certificate of Education (TCE)
  • Victorian Certificate of Education (VCE)
  • Western Australian Certificate of Education (WACE)

Where courses have specific subject requirements, these will be expected to be studied within one of the above qualifications. Grades of ‘B’ (ACT, NTCE, SACE, VCE, WACE), ‘4’ (HSC), ‘CA’ (TCE), ‘HA’ (QCE) or higher will normally be required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Austria

For students taking the Austrian Reifeprüfung (Matura), we typically require an average score between 2.2 and 1.2 from 6 written or spoken exams. Where courses have specific subject requirements, a score of or 1 will normally be required in each.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Bahrain

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements

Belgium

The Certificat d’Enseignement Secondaire Supérieur (CESS) and Diploma van Secundair Onderwijs (DSO) are both acceptable qualifications for direct entry into first year undergraduate courses. We typically require an overall score ranging from 75% to 85%. Where the 20 point marking scale is used, we would typically require marks between 15/20 and 17/20.

Specific subject marks may be required for some courses and where this is the case, this should be studied as a 4 hour subject. Where courses require achievement in GCSE Maths, we would normally look for a score of 50% or higher in Maths within the CESS or DSO.

Students currently studying the Abschlusszeugnis der Oberstufe des Sekundarunterrichts should contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Brazil

Students taking the Brazilian High School Certificate(Certificado de Ensino Médio and Exame Nacional do Ensino Médio – ENEM) will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements

Brunei

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Bulgaria

For students taking the Diploma za Sredno Obrazovanie, we would typically ask for an overall score ranging from 5.3 6.0 overall with specific subject marks required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.5 or higher in Maths within the Diploma za Sredno Obrazovanie.

All students must also achieve the University’s English language requirements.

Canada

Typical offers for students from Canada are based on having completed Grade 12. The information below outlines the requirements for different states:

Alberta, Northwest Territory, Nunavut

  • Typical offers are based on an average of best 5 grade 12 courses in the General High School Diploma and offers typically range from 80% - 93%.
  • Where courses require specific subjects, these should be taken as thirty-level courses. Where A Level Maths is a course requirement, both Mathematics 30-1 and Mathematics 30-2 should be completed.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

British Columbia, Yukon Territory

  • Typical offers range from ‘BBBBBB’ – ‘AAAAAA’ from best 6 grade 12 subjects in the Senior Secondary Graduation Diploma.
  • Where courses require specific subjects these would normally need to be achieved at ‘A’ or ‘B’.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of ‘C’ or higher in grade 10 Maths.

Manitoba

  • Typical offers are based on an average of best 5 subjects at 300 level in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

New Brunswick, Prince Edward Island, Quebec, Saskatchewan

  • Typical offers are based on an average of best 5 grade 12 subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses. Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Newfoundland & Labrador

  • Typical offers are based on an average of best 5 university preparatory level subjects in the High School Graduation Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Nova Scotia

  • Typical offers are based on an average of best 5 subjects at level 4 or 5 in the High School Completion Certificate and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

Ontario

  • Typical offers are based on an average of best 6 grade 12 courses at ‘4U’, ‘4M’ or ‘DU’ in the Ontario Secondary School Diploma and offers typically range from 80% - 93% with specific subject marks required for some courses.
  • Where courses require achievement in GCSE Maths, we would normally look for a score of 60% or higher in grade 10 Maths.

 

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

China

Students taking the Senior Middle Examinations will need to complete a suitable Foundation Year. 

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within China as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Croatia

For students taking the Croatian Matura (Svjedodžba o Maturi), we typically require an average score between 4.0 and 5.0 from best 5 subjects.

Where courses have specific subject requirements, a score of or will normally be required in each. For courses that require Maths as part of their A Level offer, this should be taken at extended level in the Matura

All students must also achieve the University’s English language requirements.

Cyprus

The Apolytirion is not accepted for direct entry to the University when studied on its own. However, we are happy to consider students taking the Apolytirion alongside either 1 or 2 A Levels. For courses with typical offer requirements of ‘ABB’, we would typically require 19.5 in the Apolytirion alongside an ‘A’ at A Level or 18.0 in the Apolytirion alongside ‘AB’ at A Level. Where courses require specific subjects, these must be taken at A Level.

Where courses require achievement in GCSE Maths, we would normally look for a score of 17 or higher in Maths within the Apolytirion.

Students taking the Apolytirion without additional A Levels will need to complete a suitable Foundation Year. Loughborough University has its own Foundation Year, alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

All students must also achieve the University’s English language requirements.

Czech Republic

For students taking the Czech Maturita (Vysvědčení o Maturitní Zkoušce), we typically require an average ranging from 2.00 to 1.00 from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All applicants must also achieve the University’s English language requirements.

Denmark

For students taking the Bevis for Studentereksamen (STX), typical offers range from 8.0 to 10.5 in the weighted average mark from the STX. Some courses may require marks (either 10 or 12) in specific Level A subjects.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Level C Maths with the STX.

Students who have taken the Studentereksamen under the old grading system would be considered on a case by case basis with an average between 9.0 and 11.0 normally required.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Egypt

Students who have studied the Thanaweya A’ama (Certificate of General Secondary Education) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Estonia

For students taking the  Gümnaasiumi lõputunnistus with the Riigieksamitunnistus, we typically require a high average grade between 4.3 and 4.8 in the Gümnaasiumi lõputunnistus as well as an average percentage between 77% and 90% in the Riigieksamitunnistus.

Specific subject marks may be required for some courses. For Engineering and Science courses, we would expect students to have studied Lai Matemaatika.

Students with a score of 4.0 with 70% average from state exams would be considered on a case by case basis for the Loughborough University Foundation Year

All students must also achieve the University’s English language requirements.

European Baccalaureate

For students taking the European Baccalaureate, we typically require an overall average mark between 78% and 88% with specific subject marks (normally 8.0 or higher from a 4 or 5 period subject) required for some courses.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6.5 or higher in Maths 3.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details. When applying, please state whether you are taking English as Language 1, 2, 3 or 4.

Faroe Islands

Students taking the Studentsprógv would normally be required to achieve a score between 8.0 and 10.5 with specific subject marks (either 10 or 12) required for some courses.

All students must also achieve the University’s English language requirements.

Finland

For students taking the Ylioppilastutkinto / Studentexamen, typical offer requirements would normally be based on achievement in best 4 subjects. Offers will typically be expressed as four letter grades ranging from MMMM (achieve Magna cum laude approbatur or higher in four subjects) to LEEE (achieve Eximia cum laude approbatur or higher in four subjects with at least one subject at Laudatur).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Lukion Päästötodistus

All students must also achieve the University’s English language requirements.

France

For students taking the French Baccalaureat, we typically require a range from 13.0 – 15.5 with specific subject marks required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Science (‘S’) stream. Students following the Option Internationale (OIB) will often receive a slightly lower offer.

Where courses require achievement in GCSE Maths, we would normally look for a score of 10 or higher in Maths within the Baccalaureat.

Students taking the Baccalaureat Technologique will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Germany

Students taking the Abitur typically require an overall score ranging from 1.3 - 2.0 with specific subject marks required for some courses (normally between 12and 15).

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Maths within the Abitur.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Ghana

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Greece

Students taking the Greek Apolyterion are normally required to also take the Panhellenic Exams. Typical offers are based on the General Access Grade in the Panhellenics and range from 16.5 to 19.0 depending on the course applied for. Where courses have specific subject requirements, these should be taken as ‘Direction’ subjects within the Panhellenics. Students applying for Science or Engineering courses would generally be expected to have followed the Sciences direction. We will also normally ask for a mark between 17.0 and 19.0 in the Apolyterion certificate.

Students who have studied 1 or 2 A Levels alongside the Apolyterion (without taking the Panhellenic Exams) would normally be required to obtain high grades in their A Level  exams along with an average mark of between 17.0 and 19.0 in the Apolyterion. Where courses have specific subject requirements, these should be taken as A Levels.

Students taking a Foundation course alongside the Apolyterion will be considered on a case by case basis.

All students must also achieve the University’s English language requirements.

Hong Kong

Typical offers for students taking the HKDSE  vary by course and range from ‘5, 4, 4’ – ‘5*, 5, 5’ from best 3 subjects, of which 2 must be electives and excluding Liberal Studies and Chinese. Where courses require specific subjects, we would be looking for grades between ‘4’ and ‘5*’ in these subjects.

For courses that require Maths as part of their A Level offer, this should be taken at extended level in the HKDSE. Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in core Maths.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Hungary

For students taking the Hungarian Matura (Érettségi Bizonyítvány), we typically require an average ranging from 70% to 83% from best 5 subjects which must include at least 2 higher level exams.

Where courses have specific subject requirements, a score of between 70% and 90% would normally be required in a higher level exam.

All students must also achieve the University’s English language requirements.

Iceland

For students taking the Stúdentspróf, we typically require an overall grade between 8.0 and 9.3 with specific subject marks (between 8 and 10) required for some courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

India

Typical offers are based on the Standard XII school leaving qualifications. When awarded by CBSE, ISCE or West Bengal Exam Boards, we typically ask for results in the region of 78% - 88% average performance from best 5 subjects. For other state boards, we would be looking for achievement between 83% - 93% from best 5 subjects. Specific subject marks at Standard X or Standard XII may be required for some courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Indonesia

Students who have studied the Ijazah: Sekolah Menengah Atas/Madrasah Aliyah (SMA/MA) will need complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Ireland

Students who have taken the Leaving Certificate under the new grading system (post 2016) would normally be required to achieve 5 higher level passes with grades ranging from H2 H2 H3 H3 H3 to H1 H1 H2 H2 H2. Where courses have specific A Level subject requirements, these should be taken at higher level.

If you have taken the Leaving Certificate under the old grading system (pre 2016) our typical offers would be between B1 B1 B2 B2 B2 and A1 A1 A2 A2 A2.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Israel

For students taking the Bagrut, we would require students to have studied at least 21 study units. Typical offers will be based on average percentage from 3 best 5-unit level subjects with requirements ranging from 78% to 92% depending on the course. Please note that we do not use the Optimal Average and do not consider bonus points as part of our offers.

Where courses have specific subject requirements, we would expect these to be studied as a 5-unit subject and look for achievement between 80% and 95%.

All students must also achieve the University’s English language requirements.

Italy

For students taking the Diploma di Esamo di Stato, we typically require an overall score ranging from 85% - 98% overall. Where courses require specific subjects, we would be looking for marks between 8 and 10 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in school assessment for Maths.

Students taking the Diploma di Istituto Tecnico will be considered for first year entry on a case by case basis where subjects studied are relevant to the course for which they have applied.

All students must also achieve the University’s English language requirements.

Japan

Students taking the Kotogakko Sotsugyo Shomeisho (Upper Secondary School Leaving Certificate) will need to complete a suitable Foundation Year

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Alternatively, we will accept a first year of study at a recognised university of appropriate standing within Japan as acceptable for entry to the first year of some of our degree courses. We would typically require an overall average ranging from 75% to 80% with specific subject marks required for some courses. Please contact the International Office who can advise on acceptability for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Jordan

Students taking the Tawjihi (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

Students must also achieve the University’s English language requirements.

Kenya

Students taking the Kenya Certificate of Secondary Education will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Kuwait

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Latvia

For students taking the Atestāts par Vispārējo Vidējo Izglītību, we typically require a high average grade between 9.2 and 10.0 as well as an average between 87% and 95% from best 4 state exams.

Where courses have specific subject requirements, a score between 87% and 95% will normally be requested in state exams in these subjects.

Students with a score of 8.0 with 80% average from best 4 state exams would be considered on a case by case basis for the Foundation Year.

All students must also achieve the University’s English language requirements.

Lebanon

Students taking the Baccalauréat Général will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Students must also achieve the University’s English language requirements.

Lithuania

For students taking the Brandos Atestatas, typical offers generally range from 9.0 – 10.0 overall. We would also typically ask for an average percentage from the best 3 state exams between 80% and 94%. Where courses require specific subjects, we would typically require these to be taken as state exams.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in school assessment for Maths.

All students must also achieve the University’s English language requirements.

Malaysia

For students taking either the Matrikulasi (Matriculation Certificate) or the Sigjil Tinggi Persekolahan Malaysian (STPM), we would typically require grades ranging from AAA-BBB from best 3 (core) subjects excluding general studies.

Where courses require achievement in GCSE Maths, we would normally look for a grade C or higher in SPM (Sijil Pelajaran Malaysia) Maths.

For students taking the Unified Examination Certificate (UEC) we would typically require from the best 7 subjects grades ranging 2xA1 5xA2 to 7xB3 in the UEC-SML. Where courses require achievement in GCSE Maths, we would normally look for a grade B6 or higher in Maths.

  • Students taking the MARA Diploma will be considered for first year entry on a case by case basis.                                                                                                                             
  • Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Malta

For students taking the Advanced Matriculation Exam, typical offers would normally be based on achievement in 2 advanced level subjects (typically between BB and AA) and 3 intermediate level subjects excluding Systems of Knowledge (typically between BCC and AAA).

Where courses have specific subject requirements, a score of B or A will normally be required in an Advanced Level subject. Where courses require achievement in GCSE Maths, we normally look for a score of 4 or higher in Maths within the Secondary Education Certificate (SEC).

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Netherlands

For students taking the Voorbereidend Wetenschappelijk Onderwijs (VWO)., typical offers range from 6.6 to 7.4 average from the VWO with specific subject marks (between and 9) required for some courses.

Students applying for Science or Engineering courses would generally be expected to have followed the Natuur en Techniek stream within the VWO and have taken the Maths D course.

Where courses require achievement in GCSE Maths, we would normally look for a score of 5 or higher in Maths within the VWO.

Students taking the Middelbaar Beroepsonderwijs (MBO Level 4) certificate will be considered for first year entry on a case by case basis where subjects studied are relevant to the university course applied for. Please contact the Undergraduate Admissions Office for further details.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

New Zealand

For students taking the National Certificate in Educational Achievement (NCEA) Level 3 typical offers will be based on overall achievement in the NCEA plus a required number of credits achieved at the next level up. For example, where A Level requirements are ABB, we would normally require a Merit overall with 20 Level 3 credits achieved at Excellence.

Where courses have specific subject requirements, these should be studied at Level 3 within the NCEA. Typically, an overall achievement of Merit or Excellence will be required in these subjects.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Nigeria

Students taking the WASSCE will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Norway

For students taking the Vitnemål for Videregående Opplæring, typical offers range from 4.00 to 5.25 average of all Final Assessment Grades.

Where courses have specific subject requirements, students will need to achieve a or higher in at least two 140-hour courses.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table on the English Language page for further details.

Oman

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Pakistan

Students taking the Intermediate/Higher Secondary School Certificate (HSSC) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Poland

For students taking the new Matura typical offers are based on average achievement from 3 extended level exams and offers normally range from 75% - 85%. Where courses require specific subjects, these should be taken as extended level exams and we would normally look for marks between 75% and 90%.

Where courses require achievement in GCSE Maths, we would normally look for a score of 68% or higher in the compulsory standard level Maths.

All students must also achieve the University’s English language requirements.

Portugal

Students taking the Diploma de Ensino Secundário would normally be required to achieve a score between 16.5 and 18.5 with specific subject marks (between 17 and 19) required for some courses.

Where courses require achievement in GCSE Maths, we normally look for a score of 14 or higher in Maths within the Diploma de Ensino Secundário.

All students must also achieve the University’s English language requirements.

Qatar

Students taking the Shahadat Al-Thanawaya Al-Aama (Senior School Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Romania

For students taking the Diploma de Bacalaureat, typical offers range from 8.6 – 9.4 overall. Where courses require a specific subject, we would be looking for this to be studied as the optional subject within the Diploma de Bacalaureat with marks between 8.6 and 9.8.

Where courses require achievement in GCSE Maths, we would normally look for a score of 7 or higher in Grade 10 Maths from the ‘Foaie Matricola’ or 6.5 or higher in Maths from the Diploma de Bacalaureat.

All students must also achieve the University’s English language requirements.

Russia

Students taking the Certificate of Unified State Examination will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Saudi Arabia

Students who have studied the Tawjihiyah (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Singapore

For students with Singapore A Levels, typical offers normally range from BBC to AAA from three H2 Level subjects and offers are typically one grade lower than the typical A Level requirement as stated in the undergraduate prospectus due to the comparative difficulty.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required in line with UK A Level requirements.

Students with a Diploma from one of Singapore’s five Polytechnics would be considered for first year entry with requirements ranging from 2.50 to 3.10. Second year entry may be considered in some cases. Please contact the International Office to check if this is applicable.

For IB requirements please see the undergraduate prospectus.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Slovakia

For students taking the Slovakian Matura (Vysvedčenie o maturitnej skúške), typical offers range from 2.00 to 1.00 average from best 4 subjects with specific subject marks (either 1 or 2) required for some courses.

All students must also achieve the University’s English language requirements.

Slovenia

For students taking the Maturitetno Spričevalo., we typically require an overall total score of between 22 and 30 out of 34.

Where courses have specific subject requirements, a score of or 5 will normally be required in each. Applicants for Science or Engineering courses would normally be required to take Maths at higher level and would be required to achieve a mark of between 6 and 8.

All students must also achieve the University’s English language requirements.

South Africa

For students taking the National Senior Certificate (NSC), typical offers range from 6,6,6,6,6 to 7,7,7,7,7 from the best 5 subjects, excluding Life Orientation.
 
Where courses have specific subject requirements, a score of or would normally be required.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

South Korea

Students taking the High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

Spain

We require students taking the Título de Bachiller to achieve a certain grade out of 10 in the Nota de Acceso from the Prueba de Acceso a Estudios Universitarios (PAU). Typical offers range from 7.75 to 9.00 in the Nota de Acceso. Please note that the Nota de Acceso is a mark out of 10 which is made up of the overall mark from the Título de Bachiller (60%) and the average mark from the Fase General (40%).

Where courses have specific subject requirements, a mark of 7.50 or higher would normally be required in either a Fase General or Fase Específica exam. Where courses require achievement in GCSE Maths, we would normally look for a score of 6 or higher in Maths within the Título de Bachiller.

Students taking the new Reválida exams will be asked for a mark out of 10 from the Calificación Media between 7.75 and 9.00 in line with our requirements from the PAU. Please note that the Calificación Media is a mark out of 10 which is made up of the overall mark from the Título de Bachiller (60%) and the average mark from the four compulsory (Troncales Generales) Reválida exams (40%). Note that students applying for Science or Engineering courses would generally be expected to have followed the Ciencias stream.

For students taking the EBAU/EVAU, please contact the International Office for further advice.

All students must also achieve the University’s English language requirements.

Sri Lanka

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

Sri Lankan A Levels are considered comparable to the typical A Level requirements. However, as an A* grade cannot be achieved in Sri Lankan A Levels, an A grade is acceptable to meet this requirement where applicable.

All students must also achieve the University’s English language requirements.

Sweden

For students tasking the Avgångsbetyg / Slutbetyg från Gymnasieskola, typical offers are normally based on an average score from 2500 credits with an ‘A’ counting as 20 points, a ‘B’ counting as 17.5 points, a ‘C’ counting as 15 points etc. Typical offers range from 16.0 to 18.8 average from 2500 credits.

Where courses have specific subject requirements, an ‘A’ or ‘B’ grade would normally be required from 2 relevant subject modules within the Slutbetyg.

Students who took the Avgångsbetyg / Slutbetyg från Gymnasieskola under the old grading system are considered on a case by case basis with most courses requiring a majority of ‘VG’ and ‘MVG’ grades.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Switzerland

Students taking the following qualifications would be considered for direct entry to undergraduate courses: Certificat de MaturitéMaturitätsausweisAttestato di Maturità. Typical offer requirements are based on average achievement from best 12 subjects and offers typically range from 4.8 – 5.5. Where courses require specific subjects, we would be looking for marks between 5.0 and 6.0 in school assessment.

Where courses require achievement in GCSE Maths, we would normally look for a score of 4.0 or higher in school assessment for Maths.

English language studied within one of the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Taiwan

Students taking the Senior High School Diploma will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Alternatively, Junior College Diploma holders may be considered on a case by case basis for entry to undergraduate courses.

All students must also achieve the University’s English language requirements.

Tanzania

The Advanced Certificate of Secondary Education Examination (ACSEE) is acceptable for entry into the first year of undergraduate courses. Typical offers are the same as for UK A Levels as stated in the Undergraduate Prospectus.

For courses which require achievement in GCSE Maths, we normally look for a score of C or higher in Maths in the Certificate of Secondary Education (CSE).

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

Thailand

Students taking the Certificate of Secondary Education/Maw 6 will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

The Caribbean

For students taking the Caribbean Advanced Proficiency Examination (CAPE), we typically require a range from ‘2, 2, 2’ -  ‘1, 1, 1’ achieved from three 2-unit exams with specific subject marks of ‘1’ or ‘2’ required by some courses

Where courses require achievement in GCSE Maths, we would normally look for a score of ‘3’ or higher in Caribbean Secondary Education Certificate (CSEC) Maths.

Requirements for American SATs and APs can be found under the country requirements for USA.

English language studied within the above qualification is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

The Gulf

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Turkey

For students taking the Anadolu Lisesi (Anatolian High School Diploma) or Fen Lisesi (Science High School Diploma), will typically require a pass mark of higher than 80%,

Students taking the Lise Bitirme Diplomasi, will be considered for first year entry on a case by case basis.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

Uganda

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. The Uganda Advanced Certificate of Education (UACE) is also acceptable with grades equivalent to the typical A Level offer requirements.

English language studied within the above qualifications is normally sufficient to meet the university’s minimum entry requirements. Please see the Approved Qualifications table for further details.

United Arab Emirates

Students who have studied the Tawjihiyah/Thanawiya amma (General Secondary Education Certificate) will need to complete a suitable Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements. Requirements for American SATs and APs can be found under the country requirements for USA.

All students must also achieve the University’s English language requirements.

United States of America

For students studying in the American education system, typical offers for entry onto undergraduate level courses are based on obtaining between 3.2 and 3.8 in the High School Diploma along with achievement in Advanced Placement Exams (from our approved list) or SAT II Subject Specific Tests. We would typically require between ‘4, 4, 4’ and ‘5, 5, 5’ in 3 AP exams from our approved list below or between ‘650, 650, 650’ and ‘750, 700, 700’ in 3 SAT subject tests.

Approved List of AP Exams:

  • Biology
  • Calculus AB
  • Calculus BC
  • Chemistry
  • Physics (as half courses B and C)
  • English Literature and Composition
  • English Language and Composition
  • French Language
  • French Literature
  • German Language
  • Italian Language and Culture
  • Latin Literature
  • Latin: Vergil
  • Spanish Language
  • Spanish Literature
  • European History
  • United States History
  • World History

Applicants who have taken 2 AP Exams from the above list and at least 2 other AP Exams will normally be considered but are advised to contact their chosen Department in advance. We also welcome applications from students who are studying 3 IB Higher Level Certificates alongside the High School Diploma.

Where courses have an A Level maths requirement, it would be necessary for applicants to achieve a high mark in AP Calculus BC. For programmes that require achievement in GCSE Maths, we would normally look for a score of ‘570’ or higher in SAT I Math.

To satisfy English language requirements, we normally ask for a score of ‘610’ in SAT I Evidence-Based Reading/Writing although some programmes have higher requirements. 

If you have completed the High School Graduation Diploma without taking AP Exams, SAT subject tests or IB Higher Level subjects, you may be eligible for our International Foundation programme.

Vietnam

Students who have studied the Bằng Tốt Nghiệp Phổ Thông Trung Học  will need to complete an appropriate Foundation Year.

Loughborough University has its own Foundation Year for high-calibre international students who have successfully completed 12 years of school education. Alternatively, please contact the International Office to check if the Foundation Programme that you are considering taking is acceptable for entry to Loughborough courses.

Students with A Level or IB qualifications will be considered for direct entry to undergraduate degree courses. Please see the undergraduate prospectus for specific course requirements.

All students must also achieve the University’s English language requirements.

The University uses contextual data in the admissions process to provide insights into the context in which your academic qualifications have been achieved. This may influence the typical offers listed above.

Tuition fees for 2019 entry

UK / EU fees

Full-time course per annum
£9,250
Placement year
£1,850

International fees

Full-time course per annum
£22,350
Placement year
£3,400

Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, IT equipment and other support services. University fees and charges can be paid in advance and there are several methods of payment, including online payments and payment by installment.

Additional costs

All costs for direct engagement in taught modules are included as part of the tuition fees – this includes materials used in the workshops and safety equipment. From time to time students will need to cover the costs of project work and the creation of design folios. This amount will depend on what materials, manufacturing techniques and other creative choices the student makes.

An allowance for costs incurred for individual projects is allocated for year 2 and final year. In the final year the school contributes £100 to the cost of creating the final year project. The final mark awarded for all assessed submissions bears no relation to the amount of money spent on the work. Students will not gain any marking advantage merely through the costly development of work.

Your future career

Graduates in work or further study within 6 months of graduation

93%

DLHE 2016 (Full-time UK first degree students available for work or study)

We've got fantastic links with leading employers who value the skills honed in our graduates. Studying a degree in Industrial Design and Technology at Loughborough opens up a variety of career paths and options - it provides a great foundation for a really exciting, rewarding career.

Studying our Industrial Design and Technology degree provides you with expert training to engage with a wide number of industries immediately after graduating. Possible career paths include in consumer product design, marketing, industrial design consultancy, project planning, technical sales, furniture design, CAD/CAM, buying, interior/exterior design, advertising and display design.

Example graduate positions include:

  • Marketing intern
  • Assistant Buying Manager
  • Digital Designer
  • Trainee Design Engineer
  • Innovation Designer
  • Industrial CAD Designer
  • Product Engineer
  • Product Designer
  • Industry Designer

Career Support Services

Your time at Loughborough University will form a launchpad from which you can build an exciting career. With so many opportunities available, you’ll never be short of ways to improve your employability.

Our award-winning Careers Network team is here to help and support you, offering everything from CV workshops, one-to-one advice sessions and mock interview practice sessions to high-profile employer events. We’ve got everything you need for a really successful future.

Companies students have worked for after graduating

Recent graduate destinations include: Adidas; Alliance Boots; Dyson; BskyB; Joseph Joseph; Marks and Spencer; Proctor and Gamble; Sebastian Conran Associates.

Our students