AMRG Group
Equipment - FormLabs Form 2 for Stereolithography
The FormLabs Form 2 (SLA) is used for photopolymeric layer manufacturing of Epoxy-based resin materials. It is used to support teaching, fundamental research and application projects.
The resin is cured by solidifying successive layers with diode laser with a wavelength of 405nm. The beam produces 250mW of power at the point of convergence with the resin vat.
Selected Parameters
|
Part Size |
145 x 145 x 175 mm |
|
Layer Thickness |
0.025 mm – 0.1 mm |
|
Build Velocity |
5 mm/s |
|
Beam Diameter |
0.14 mm |