Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 222222
Loughborough University

Programme Specifications

Programme Specification

MEng (Hons) Systems Engineering

Academic Year: 2014/15

This specification provides a concise summary of the main features of the programme and the learning outcomes that a typical student might reasonably be expected to achieve and demonstrate if full advantage is taken of the learning opportunities that are provided.

This specification applies to delivery of the programme in the Academic Year indicated above. Prospective students reviewing this information for a later year of study should be aware that these details are subject to change as outlined in our Terms and Conditions of Study.

This specification should be read in conjunction with:

  • Summary
  • Aims
  • Learning outcomes
  • Structure
  • Progression & weighting

Programme summary

Awarding body/institution Loughborough University
Teaching institution (if different)
Owning school/department School of Electronic, Electrical and Systems Engineering - pre-2016
Details of accreditation by a professional/statutory body
  • Institution of Engineering and Technology
  • Institute of Measurement and Control
  • Royal Aeronautical Society

For students joining the programme in 2009 or earlier, all module combinations fulfil the educational requirements for accreditation at CEng by the Institution of Engineering and Technology, the Royal Aeronautical Society and the Institute of Measurement and Control.

For students joining the programme in 2010 or later all module combinations fulfil the educational requirements for accreditation at CEng by the Institution of Engineering and Technology and the Royal Aeronautical Society, however for accreditation by the Institute of Measurement and Control, the following additional specific programme content is required:

The programme must include at least 30 credits from: 

Code

Title

Modular
Weight

ELD506

Fundamentals of Digital Signal Processing

15

ELD023

Microcontroller Laboratory

15

ELD033

Systems Diagnostics

15

ELD560

Soft Systems Engineering

15

ELD062

Understanding Complexity

15

ELD566

Systems Design

15

ELD567

Validation and Verification

15

ELD568

Sensors and Actuators for Control

15

Final award MEng /MEng + DIS/ MEng + DIntS
Programme title Systems Engineering
Programme code ELUM20
Length of programme The duration of the programme is 8 semesters or 10 semesters if taken with either the Diploma in Industrial Studies (DIS) or the Diploma in International Studies (DIntS). If industrial training is undertaken, as required for the award of the Diploma in Industrial Studies, this will occur either between Parts B and C or between Parts C and D but only after successful completion respectively of Parts B and C. If the study and training, required for the award of Diploma in International Studies is undertaken, this will occur either between Parts B and C or between Parts C and D but only after successful completion respectively of Parts B and C. The programme is only available on a full-time basis.
UCAS code H660, H641
Admissions criteria

http://www.lboro.ac.uk/study/undergraduate/courses/departments/eese/systemsengineering/

Date at which the programme specification was published Tue, 31 Mar 2015 14:45:00 BST

1. Programme Aims

To meet the all of the aims of the BEng programme in Systems Engineering and to further enhance a student’s learning experience by providing a high quality educational experience, for well motivated high achievers, that:

  • increases the depth and breadth of technical study to the level expected of Masters level graduates;
  • develops knowledge and skills, to a depth and breadth expected of Masters level graduates, as a preparation for a career in industry;
  • takes the student through the first level expected when applying for chartered engineer status
  • develops an enhanced capacity for independent learning, planning, self–reliance and self-evaluation;
  • enhances teamwork and leadership skills, equipping graduates of the programme to play leading roles in industry and potentially take responsibility for future innovation and change;
  • develop an appreciation for complexity and uncertainty in engineering systems;
  • Provides an introduction to and experience of mentoring and evaluation processes and techniques enabling the student to articulate identified issues and suggest alternative approaches within a system design context;
  • Provides an opportunity to work in a multi-disciplinary team and to apply project management and engineering theory and practice in a collaborative and competitive environment to build and demonstrate a complex autonomous system capable of fulfilling a changing set of requirements;
  • Increases the awareness of the complexities in the configuration of Systems of Systems particularly at the interfaces of the component systems and hence the need to take a holistic view of SoS development and operation;
  • Develops a deeper understanding of the socio-technical aspects of systems and systems of systems design and operation.

     

2. Relevant subject benchmark statements and other external reference points used to inform programme outcomes:

UK Standard for Professional Engineering Competence; Engineering Technician, Incorporated Engineer and Chartered Engineer Standard, Engineering Council UK, 2013.

UK Standard for Professional Engineering Competence; The Accreditation of Higher Education Programmes, Engineering Council UK, 2011.

Guidance Note on Academic Accreditation, Engineering Council UK, 2011.

IET Handbook of Learning Outcomes for BEng and MEng Degree Programmes, October 2009.

The UK Quality Code for Higher Education. The Quality Assurance Agency for Higher Education, April 2012.

The framework for higher education qualifications in England, Wales and Northern Ireland, The Quality Assurance Agency for Higher Education, August 2008.

Subject Benchmark Statement: Engineering, The Quality Assurance Agency for Higher Education, November 2010.

Code of practice for the assurance of academic quality and standards in higher education, Section 7: Programme design, approval, monitoring and review, The Quality Assurance Agency for Higher Education, September 2006.

The Northern Ireland Credit Accumulation and Transfer System (NICATS); Principles and Guidelines 2002.

Beyond the honours degree classification; The Burgess Group final report, October 2007.

Proposals for national arrangements for the use of academic credit in higher education in England; Final report of the Burgess Group, December 2006.

The report of the EAB Accreditation Panel, September 2010 (the panel included representatives of the IET, InstMC, RAeS and EI).

INCOSE Systems Engineering Handbook v. 3. 2012 (http://www.incose.org/ProductsPubs/products/sehandbook.aspx) aligned to ISO/IEC 15288:2008.

INCOSE multi-level Professional SEP Certification Program (http://www.incose.org/educationcareers/certification/). 

3. Programme Learning Outcomes

3.1 Knowledge and Understanding

On successful completion of this programme, students should be able to demonstrate a knowledge and understanding of:

  • the nature of systems thinking and systems engineering concepts and terminology;
  • the form and value of systems engineering-based techniques, methods and methodologies and their use in the development and evaluation of complex systems and systems of systems in a range of engineering and commercial domains;
  • the provenance and theory behind a range of systems and systems engineering tools, methods and processes;
  • the need for an integrated systems approach using appropriate and timely configurations of systems engineering methods, tools and processes;
  • the importance of integrating Requirements Specification, Systems Design and Validation and Verification approaches along the whole systems life cycle;
  • the role and limitations of enterprise systems modeling and architecture approaches: the interfaces between technical sub-systems with organisational, human and process sub systems;
  • Engineering and Management of Capability;
  • mathematical methods appropriate to systems engineering and related disciplines, including their limitations and range of applicability;
  • principles of engineering and/or systems science appropriate to engineering and related disciplines, including their range of applicability;
  • principles of Information Technology and Communications  appropriate to engineering of complex systems;
  • knowledge and information management techniques and tools;
  • design principles and techniques appropriate to relevant components, equipment and associated software;
  • characteristics of relevant common engineering materials and components;
  • management and business practices appropriate to engineering industries, their application and limitations;
  • relevant codes of practice and regulatory frameworks relevant to systems engineering and related disciplines;
  • operational practices and requirements for safe operation relevant to electronic and electrical engineering;
  • the professional and ethical responsibilities of engineers;
  • research methodologies and approaches;
  • ability to deal with uncertain, incomplete and changing information in a dynamic systems or systems of systems context.

3.2 Skills and other attributes

a. Subject-specific cognitive skills:

On successful completion of this programme, students should be able to demonstrate:

  • an ability to apply a systems approach to engineering, problem structuring and problem solving in a variety of engineering contexts;
  • a capability to select and apply different systems engineering tools, methods and processes based on both an understanding of the theory behind the tools and an appreciation of their functionality and applicability to the system context;
  • the role and processes involved in mentoring individuals and groups and evaluation of projects against goals set;
  • an understanding of standard mathematical and/or computer based methods for modelling and analysing a range of practical and hypothetical engineering problems, and the essential principles of modelling and analysing routine engineering systems, processes, components and products;
  • an appreciation of the socio-technical aspects of system design and operation and the application of methods and techniques available in this area;
  • a competency in enterprise system modeling and architecting approaches; 
  • an understanding of a range of areas dependent on modules studied eg control techniques used in industry, aeronautical considerations of aircraft design and performance, different renewable energy generation technologies, human factors in systems design, financial management, system architecting, innovation etc.
  • an ability to develop innovative solutions to practical engineering problems;
  • a competence in defining and solving practical engineering problems;
  • the ability to integrate, evaluate and use information, data and ideas from a range of sources in their project work.
b. Subject-specific practical skills:

On successful completion of this programme, students should be able to:

  • develop a viable systems engineering approach to the development of complex systems and systems of systems in a range of engineering and commercial environments;
  • analyse and identify a problem space, extract and formalize a requirements specification for a system of interest and select and apply appropriate systems design and validation and verification methods within a defined systems engineering process along the whole system lifecycle;
  • select and use conventional laboratory equipment and relevant test and measurement equipment in a safe manner;
  • research, select and use computational tools and packages (including programming and modelling languages where appropriate) in familiar situations for modeling and analyzing pertinent engineering problems;
  • design, and where appropriate construct, systems, components or processes in a muli-disciplinary team within given time and resource constraints;
  • search for, locate, retrieve and reference correctly information, ideas and data from a variety of sources;
  • manage a project and the inherent technical and project management risks, and produce technical reports, papers, diagrams and drawings.
  • plan and execute safely novel or unfamiliar experimental laboratory work;
  • undertake testing of design ideas in the laboratory or by simulation, and analyse and critically evaluate the results.

 

c. Key transferable skills:

On successful completion of this programme, students should be able to:

  • manipulate, sort and present data in a range of forms;
  • use evidence based methods and investigative techniques in the solution of complex problems;
  • work with limited, incomplete and/or contradictory information in the solution of unfamiliar problems;
  • use an engineering and/or systems engineering approach to the solution of problems in unfamiliar situations;
  • be creative and innovative in problem solving;
  • mentoring and evaluation skills including self reflection on performance;
  • work effectively as part of a team and show potential for leadership;
  • resolve team-based problems as they arise;
  • use a wide range of information and communications technology;
  • manage time and resources;
  • use appropriate project and risk management tools;
  • communicate effectively orally, visually and in writing at an appropriate level including both formal technical reports, essays, reflective reports etc;
  • produce, organise and deliver professional and effective presentations using a range of media;
  • learn effectively, continuously and independently in a variety of environments.

4. Programme structure

These Programme Specifications apply to the conduct of the programme in the 2013-14 session and should not be construed as being relevant to any other session.  These Programme Specifications may be subject to change from time to time.  Notice of change will be given by the School responsible for the programme.

In the following tables, ‘c’ indicates a compulsory module and ‘o’ indicates an optional module. The optional modules ‘oA’, ‘oB’ and ‘oC’ should be considered along with the text following the table in which they appear. 

Modules indicated as being taught in both Semester 1 and Semester 2 have elements of assessment in each semester however examinations for these modules occur normally during the Semester 2 examination period. Modules indicated as being taught in a single semester are assessed entirely within that semester. 

4.1       Part A - Introductory Modules

Code

Module Title

Modular Weight

Semester

 

ELA005

Electromagnetism A

10

2

c

ELA002

Project and Study Skills

10

1+2

c

ELA004

Signals and Systems

10

1+2

c

ELA007

Introduction to Systems Engineering  for Projects

15

1+2

c

MAA303

Mathematics A

15

1+2

c

ELA001

Circuits

20

1+2

c

ELA003

Electronics A

20

1+2

c

ELA010

Programming and Software Design

20

1+2

c

The 20 credit module ELA001 Circuits is taught over both semesters, 2/3 of the module is taught in Semester 1 and 1/3 in Semester 2.

 

4.2       Part B - Degree Modules

 

Code

Module title

Modular weight

Semester

 

ELB004

Control System Design

15

1+2

c

ELB008

Aircraft Design

15

1+2

c

ELB006

Systems Integration

20

1+2

c

ELB007

Systems Methods

20

1+2

c

MAB303

Mathematics B

20

1+2

c

ELB002

Communications

15

1+2

o

ELB003

Electromechanical Systems

15

1+2

o

MMB140

Statics and Dynamics

 15

 1+2

 c

 Students should choose two optional (o) modules.

  

4.3       Part C  - Degree Modules 

Code

Module title

Modular weight

Semester

 

ELC012

Systems Engineering Applications Theory

15

1+2

c

DSC502

Human Factors in Systems Design

15

1+2

c

MPC022

Materials Properties and Applications

15

1+2

c

ELD002

Group Project

30

1+2

c

ELB002

Communications

15

1+2

oA

ELB010

Electronics B

20

1+2

oA

ELB014

Software Engineering

15

1+2

oA

ELB019

Computer Architecture

15

1+2

oA

ELC003

Renewable Energy Sources

15

1+2

oB

ELC006

Fast Transient Sensors

15

1+2

oB

ELC007

Electromagnetism C

15

1+2

oB

ELC008

Business Management

15

1+2

oB

ELC013

Electromagnetic Compatibility

15

1+2

oB

ELC014

Biophotonics Engineering

15

1+2

oB

ELC030

Bioelectricity – Fundamentals and Applications

15

1+2

oB

ELC041

Advanced Control

15

1+2

oB

ELC042

Electrical Machine Modelling

15

1+2

oB

ELC056

Fundamentals of Digital Signal Processing

15

1+2

oB

ELC027

or

ELC028

or

ELC029

Independent Study 1

or

Independent Study 2

or

Independent Study 3

10

 

10

 

10

1+2

 

1

 

2

oC

 

oC

 

oC

XXXXXX

Options from the University Catalogue

30

1+2

oC

Options listed as oA will normally continue to be delivered during the Semester 1 examination period, while options listed as oB will normally be suspended during the Semester 1 examination period. No more than two oA modules should be chosen and only where they were not taken at Part B.

The option oC allows a free choice of modules worth 30 credits from the University Catalogue. This choice should be restricted to modules from Part B, C or D level, subject to the overall requirement for the Part that at least 90 credits should be from Part C level or above. Choosing modules from Part D may result in examinations at the end of Semester 1. This free choice includes language modules from the University Wide Language Programme.  The total 120 credits should be arranged as near to 60 credits per semester as possible.  When making such free choices, students are responsible for ensuring that all module choices can be incorporated into their individual timetables.

All optional module arrangements are subject to Programme Director’s approval.

Module choice is subject to availability, timetabling, prerequisite, preclusive and student number restrictions. Any difficulties arising from optional module choice, including timetabling, will not normally be considered as the basis of a claim for impaired performance.

 

4.4       Part D - Degree Modules

Code

Module title

Modular weight

Semester

 

ELD560

Soft Systems Engineering

15

1

c

ELD062

Understanding Complexity

15

2

c

ELD033

Systems Diagnostics

10

1+2

c

ELD030

Advanced Project

50

1+2

c

ELD506

Fundamentals of Digital Signal Processing

15

1

oA

ELD533

Solar Power 1

15

1

oA

ELD534

Wind Power 1

15

1

oA

ELD535

Water Power

15

1

oA

ELD536

Biomass 1

15

1

oA

ELD568

Sensors and Actuators for Control

15

1

oA

ELD569

Innovation and Entrepreneurship for Engineers

15

1

oA

ELD572

Systems Architecture

15

1

oA

ELD060

Engineering and Management of Capability

15

2

oA

ELD508

Digital Signal Processing for Software Defined Radio

15

2

oA

ELD516

Communications Security

15

2

oA

ELD517

Mobile Network Technologies

15

2

oA

ELD532

Integration of Renewables

15

2

oA

ELD538

Energy Storage

10

2

oA

ELD539

Solar Thermal Systems

10

2

oA

ELD540

Advanced Photovoltaics

10

2

oA

ELD541

Wind Power 2

10

2

oA

ELD566

Systems Design

15

2

oA

ELD567

Validation and Verification

15

2

oA

XXXXXX

Options from the University Catalogue

30

1+2

oC

The optional modules listed oA are block taught in one week or two week long blocks, while those listed oB run over both semesters

The option oC allows a free choice of modules worth 30 credits from the University Catalogue. This choice should be restricted to modules from Part C or D level, subject to the overall requirement for the Part that at least 90 credits should be from Part D level or above. This free choice includes language modules from the University Wide Language Programme.  The total 120 credits should be arranged as near to 60 credits per semester as possible.  When making such free choices, students are responsible for ensuring that all module choices can be incorporated into their individual timetables.

All optional module arrangements are subject to Programme Director’s approval.

Module choice is subject to availability, timetabling, prerequisite, preclusive and student number restrictions. Note that ELD modules are generally taught in one/two week blocks while ELC and modules from other Departments may be taught over one or both semesters and this may lead to timetable clashes. Any difficulties arising from optional module choice, including such timetabling issues, will not normally be considered as the basis of a claim for impaired performance.  

 

4.5       Part I - Industrial or International training

Candidates registered for the Diploma in Industrial Studies (DIS) shall undertake a period of at least 45 weeks at a placement organized through or with the consent of the School of Electronic, Electrical and Systems Engineering. The assessment for the award of the Diploma in Industrial Studies (DIS) is by a dissertation and a poster.

Candidates registered for the Diploma in International Studies (DIntS) shall undertake an international placement at a host university under the UNITECH Scheme and is subject to a selection process. The award involves both an internship at a UNITECH Corporate partner and a programme of approved learning at a partner university.

Both the DIS and the DIntS may be taken after successful completion of Part B and before Part C, or after successful completion of Part C and before Part D. University Regulations do not allow for the award of both DIS and DIntS.

Participation in industrial and international training is subject to School approval, and all arrangements must be in accordance with University Regulation XI. 

5. Criteria for Progression and Degree Award

5.1 Criteria for Progression and Degree Award

In order to progress from Part A to Part B, from Part B to C or I, from C to D or I and to be eligible for the award of an Honours degree, candidates must not only satisfy the minimum credit requirements set out in Regulation XX but also: 

5.1.1 To progress from Part A to Part B, candidates must achieve 100 credits from Part A, with no module marks less than 30%, and an average mark in Part A of at least 55%.

5.1.2 To progress from Part B to either Part C or Part I (a period of professional training and/or study at an approved institution abroad, DIS or DIntS), candidates must achieve 100 credits from Part B, with no module marks less than 30%, and an average mark in Part B of at least 55%.

5.1.3 To progress from Part C to either Part D or Part I (a period of professional training and/or study at an approved institution abroad, DIS or DIntS), candidates must achieve 100 credits from Part C, with no module marks less than 30%, and an average mark in Part C of at least 55%.

5.1.4 To qualify for the award of the degree of Master of Engineering, candidates must achieve 100 credits from Part D, with no module marks less than 30%. In addition, candidates should normally obtain a module mark of at least 50% in all modules with codes of the form ELD5xx taken in Part D.

5.2 Re-assessment

Provision will be made in accordance with Regulation XX for candidates who have the right of re-assessment in Parts A, Part B or Part C of the programme to undergo re-assessment in the University’s Special Assessment Period (unless modules unavailable for re-assessment in the Special Assessment period are involved).

It should be noted however that:

(i) Where a candidate has achieved fewer than 60 credits in any Part of the programme, re-assessment in that Part is not permitted within the Special Assessment Period.

(ii) In accordance with Regulation XX, paragraph 40, individual project work for ELD030 obtaining a module mark between 30% and 39% inclusive may be revised and resubmitted for re-assessment. At the discretion of the Programme Board such re-assessment may be allowed in the Special Assessment Period.

(iii)Coursework re-assessment for exercises undertaken in groups and/or involving constructional, experimental or laboratory work may not be available during the Special Assessment Period.

(iv)Most postgraduate modules (including ELD5xx numbers) are unavailable in the Special Assessment Period.

(v) Candidates may elect to enter any BEng degree programme administered by the School of Electronic, Electrical and Systems Engineering if the requirements for progression for that programme have been achieved. Failure at MEng re-assessment will not affect subsequent entry to the BEng programme.

(vi) Any candidate who, after re-assessment, fails to satisfy the requirements for the award of Master of Engineering may elect to enter Part C of the BEng degree programme in Systems Engineering and on successful completion of the requirements of that programme qualify for the award of Bachelor of Engineering. Such a BEng award would be based on the candidate’s previous performance in Parts B and C of the MEng programme. The award will be calculated by combining average marks for those Parts in the ratio Part B:20 and Part C:80. Credit in the Advanced Project module ELD030 will be transferred where applicable.

 

6. Relative Weighting of Parts of the Programme for the Purposes of Final Degree Classification

Candidates’ final degree classification will be determined on the basis of their performance in degree level Module Assessments at Parts B, C and D in accordance with the scheme set out in Regulation XX.  The average percentage marks for each Part will be combined in the ratio Part B 15: Part C 42.5: Part D 42.5, to determine the final Programme Mark.

Related links

Prospective students

Image of a University homepage screengrab

Information on studying at Loughborough University, including course information, facilities, and student experience.

Find out more »

Decorative

How to print a Programme Specification

1. Select programme specification
2. Save specification as a PDF
3. Print PDF