Names

Affiliation

Paper

N. Ahmed , A.V. Mitrofanov, V.I. Babitsky, V.V. Silberschmidt

Loughborough University, UK

Analysis of Residual Stresses in Ultrasonically Assisted Turning of Aerospace Alloys

U. Ajoku , N. Hopkinson, M. Caine

Loughborough University, UK

Experimental Measurement and Finite Element Modelling of the Compressive Properties of Laser Sintered Nylon 12

H. Altenbach, K. Naumenko

Martin-Luther-Universität Halle-Wittenberg, GERMANY

How a Multi-Pass Weld in Energetic Equipments Can Be Simulated - Basic Ideas and Suggestions

F. Asma, A. Bouazzouni

University Mouloud Mammeri of Tizi-Ouzou, ALGERIE

Choice of the Measurement Points to Update Models

M.R. Ayatollahi , M.R.M. Aliha, M.M. Hasani

Iran University of Science and Technology, Narmak, Tehran, Iran

Mixed Mode Brittle Fracture in PMMA - An Experimental Study Using SCB Specimen

M.R. Ayatollahi , M. Zakeri

Iran University of Science and Technology, Narmak, Tehran, IRAN

Effects of T-Stress on Photoelastic Fringe Patterns in Mode II Cracks

M. Bäker , J. Rösler, C. Siemers

Technische Universität Braunschweig , GERMANY

Design of Machinable Titanium Alloys

A. Berezovski, M. Berezovski, J. Engelbrecht

Tallinn University of Technology, ESTONIA

Numerical Simulation of Non-linear Elastic Wave Propagation in Piecewise Homogeneous Media

J. A. W. van Dommelen, L.E. Govaert, W. A. M. Brekelmans, F. P. T. Baaijens

Eindhoven University of Technology, THE NETHERLANDS

On Modelling the Structure–Property Relationship for Semi-crystalline Materials

T. Ebinger , H. Steeb, S. Diebels

Saarland University, Saarbrücken, GERMANY

Numerical Simulation of Adaptation Processes in Living Tissues Based on a FE²-Approach

S. Elsoufiev

Odessa State University, UKRAINE

Fracture Due to Cracks and Plastic Zones near Stamp Edges Propagation

T. Fiedler, A. Öchsner, J. GrÁcio

University of Aveiro, PORTUGAL

Numerical Modelling of the Elasto-Plastic Behaviour of Syntactic Foams

F.D. Fischer (1), H.J. Böhm (2)

(1) Montanuniversität Leoben, Austria; (2) Vienna University of Technology, Vienna, AUSTRIA

On the Mechanical Driving Force on a Spheroidal Inclusion

H.–P. Gänser , W. Eichlseder

Montanuniversität Leoben, AUSTRIA

Dimensioning against Fatigue – Stress-Based Approach or Fracture Mechanics?

E. Ghorbel

Université de Cergy Pontoise, FRANCE

Viscoplastic Constitutive Model for Thermoplastic Polymers under Uniaxial and Cyclic Straining

S. Graff , D. Steglich, W. Brocks

GKSS, Geesthacht, GERMANY

Linking Meso- and Macroscale Simulations: Crystal Plasticity of Hcp Metals & Yield Surface

H. Huang, R. Talreja

Texas A&M University, College Station, USA

A Numerical Simulation Approach to Modeling of Microcracking in Short Fiber Composites

T.H. Hyde, Wei Sun

University of Nottingham, UK

Elastic-Creep Behaviour of a Three-Material Plate Subjected to a Bi-Axial Stress State

D.-E. Ilie , Th. Connolley, P.E. McHugh

National University of Ireland, Galway, IrRELAND

Representing the Effects of Size Scale on Mechanical Performance of Metals Using a Non-Localised Constitutive Law

K. Komai (1) , K. Minoshima (2), T. Terada (3)

(1) Fukui National College of Technology; (2) Department of Mechanical Engineering, Osaka University; (3) Nomura Research Institute, Ltd., JAPAN

Environmentally Assisted Fracture Behaviour of Silicon Microelements

C. Krempaszky , E. Werner

TU München, GERMANY

Residual Stress Measurement by the ESPI Assisted Incremental Hole Drilling Method

A. Leite (1), B. Li (1), J. Travassos (1), L. Reis (2), M. de Freitas (2)

(1) Instituto Superior de Engenharia de Lisboa, Lisboa, Portugal; (2) Instituto Superior Técnico, Lisboa, PORTGAL

A Fatigue Reliability Model for Multiaxial Fatigue Life Prediction

M. H. Luxner, J. Stampfl, H. E. Pettermann

Vienna University of Technology, Vienna, AUSTRIA

Nonlinear Behavior of Regular and Irregular Open Cell Structures

V. Miranda, F. Marques, A. Pinho-da-Cruz, F. Teixeira-Dias

University of Aveiro, PORTGAL

Numerical Modelling of the Impact Behaviour of High Aspect Ratio Aluminium Foam-Filled Sections

A. Moreau , E. Pagnacco, D. Lemosse, D. Borza

Institut National des Sciences Appliquées de Rouen, St. Etienne du Rouvray, FRANCE

An Experimental/Numerical Approach for the Direct Identification of Viscoelastic Material Parameters Using Frequency Domain Data

A.B. Movchan (1) , S. Haq (1), G. Rodin (2)

(1) University of Liverpool, UK; (2) University of Texas at Austin, USA

Lattice Structures and Non-local Imperfect Interfaces

N.V. Movchan

University of Liverpool, UK

Filtering of Elastic Waves by Composite Structures with Coated Inclusions

Model of Strength and Fracture Toughness of Nanotube Based Nanocomposites

T. Reip (1) , C. Krempaszky (1), E. Parteder (2), E. Werner (1)

(1) TU München, GERMANY; (2) Voestalpine Stahl Linz GmbH, Linz, AUSTRIA

Surface Deterioration of Rolling Mill Rolls

A. Rekik, M. Bornert , F. Auslender, A. Zaoui

LMS - Ecole Polytechnique, Palaiseau, FRANCE

Nonlinear Composites: Accurate Evaluation of Various Linearization Procedures

L. Renhof, C. Messner, E. Werner

TU München, GERMANY

Simulating the Forging Process of IN 718 by Deformation Experiments in a Dilatometer

F. Reusch , B. Svendsen

University of Dortmund, GERMANY

Simulation of Crack Initiation and Propagation in Heterogeneous Materials with a Non Local Damage Model

M. Richter

Technische Universität Dresden, GERMANY

On the Material Behaviour of Textile Reinforced Concrete under Tensile Loading Using Representative Volume Elements

T. Sadowski (1) , S. Hardy (2), E. Postek (2)

(1) Lublin University of Technology, Poland; (2) University of Wales Swansea, UK

Time-Dependent Mechanical Response of Polycrystalline Ceramics Containing Metallic Inter-Granular Layers Subjected to Uniaxial Tension

V. Shevchuk (1) , V.V. Silberschmidt (2)

(1) Pidstryhach Institute for Applied Problems of Mechanics and Mathematics, NAS, L’viv, Ukraine; (2) Loughborough University, UK

Computational Analysis of Damage Evolution in Thick Ceramic Coatings

B. Wolbank, C. Messner, E.A. Werner

TU München , GERMANY

On the Ratchetting Limit of Two-Phase Materials as a Function of Combined Thermal and Mechanical Loads with Special Emphasis on Duplex Steels

M. Yaguchi (1) , M. Yamamoto (1), T. Ogata (1), E. P. Busso (2)

(1) Central Research Institute of Electric Power Industry, Tokyo, Japan; (2) Imperial College London, UK

An Anisotropic Constitutive Model for the Elasto-Visco-Plastic Deformation of Directionally Solidified Materials

X.C. Zhang (1,2) , B.S. Xu (2), H.D. Wang (2), Y.X. Wu (1)

(1) Shanghai Jiaotong University, China; (2) National Key Laboratory for Remanufacturing, Beijing, China

Microstructure and Edge Delamination of Fe-Al/WC Composite Coatings

Jian Zhao, V.V. Silberschmidt

Loughborough University, UK

Micromechanical Analysis of Effective Properties of Ceramic Coatings